Rdate-Server - Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device Configuration Manual
11000 series secure content accelerator
Hide thumbs
Also See for CSS11501 - 100Mbps Ethernet Load Balancing Device:
- Hardware installation manual (184 pages) ,
- Datasheet (10 pages) ,
- Product support bulletin (3 pages)
Table of Contents
Advertisement
Appendix C
Command Summary
Syntax Description
Usage Guidelines
Note
rdate-server
Syntax Description
Usage Guidelines
78-13124-05
access
enable
idle-timeout
minutes
Availability: Serial, Telnet; FIPS Mode (serial only)
The access password is used when attaching to the device during a remote
management session.You are prompted to enter and verify the password. Use the
no form of the command with access or enable to clear the appropriate password
for the current device. Use no password idle-timeout to disable the timeout
feature.
When using the password command in FIPS Mode to set an access
or enable, you must supply a password or passphrase of at least eight
characters.
Specifies and RDATE-protocol server to be used for date and time information on
the device.
rdate-server <ipaddr>
no rdate-server
ipaddr
Availability: Serial, Telnet; FIPS Mode (serial only)
Cisco 11000 Series Secure Content Accelerator Configuration Guide
Sets or clears the device attach-level password.
Sets or clears the device enable-level password.
Keyword specifying that the idle-timeout period is to
be set.
The number of minutes before a telnet or Web GUI
management session times out.
The IP address of the RDATE server.
Configuration Command Set
C-73
Advertisement
Table of Contents
Troubleshooting
