Ip Route Default; Keepalive-Monitor - Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device Configuration Manual
11000 series secure content accelerator
Hide thumbs
Also See for CSS11501 - 100Mbps Ethernet Load Balancing Device:
- Hardware installation manual (184 pages) ,
- Datasheet (10 pages) ,
- Product support bulletin (3 pages)
Table of Contents
Advertisement
Appendix C
Command Summary
ip route default
Syntax Description
Usage Guidelines
Related Commands
keepalive-monitor
Syntax Description
Usage Guidelines
Related Commands
78-13124-05
Sets the default route for the current device.
ip route default <ipaddr>
no ip route default
ipaddr
Availability: Serial, Telnet; FIPS Mode (serial only)
Use the no form of the command to clear the IP address for the default router.
ip address (Configuration Command Set)
Indicates that SSL errors from the specified IP address are to be ignored.
keepalive-monitor <ipaddr>
no keepalive-monitor <ipaddr>
ipaddr
Availability: Serial, Telnet; FIPS Mode (serial only)
Up to two IP addresses, set individually, are allowed.
show keepalive-monitor (Non-Privileged Command Set)
Cisco 11000 Series Secure Content Accelerator Configuration Guide
The IP address of the default router to use.
The source IP address from which SSL errors are to be
ignored.
Configuration Command Set
C-71
Advertisement
Table of Contents
Troubleshooting
