Certificate Configuration Command Set; Binhex; Der - Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device Configuration Manual
11000 series secure content accelerator
Hide thumbs
Also See for CSS11501 - 100Mbps Ethernet Load Balancing Device:
- Hardware installation manual (184 pages) ,
- Datasheet (10 pages) ,
- Product support bulletin (3 pages)
Table of Contents
Advertisement
Configuration Command Set
Certificate Configuration Command Set
binhex
Syntax Description
Usage Guidelines
der
Syntax Description
Usage Guidelines
Cisco 11000 Series Secure Content Accelerator Configuration Guide
C-118
Use Certificate Configuration commands to set up and manage certificate objects.
Enter Certificate Configuration mode by using the enable command in
Non-Privileged mode, the configure command in Privileged Mode, the ssl
command in Configuration mode, and the cert command in SSL Configuration
mode. The prompt changes to
Pastes a binary hex-encoded X509 certificate into the configuration manager.
binhex [value]
value
Availability: Serial, Telnet; FIPS Mode (serial only)
After the command is entered, you are prompted to paste the certificate from the
cut buffer. You can use a text editor to copy the certificate from a file. After the
certificate is pasted, you must press Enter twice to complete the command.
Loads a DER-encoded X509 certificate file into the current object.
der [url]
url
Availability: Serial, Telnet; FIPS Mode (serial only)
If you do not enter the URL, you are prompted for it.
<config-ssl-cert[certname]>>
The certificate that has been copied into the cut buffer.
The location of the file.
Appendix C
Command Summary
.
78-13124-05
Advertisement
Table of Contents
Troubleshooting
