Keepalive Enable; Keepalive Frequency - Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device Configuration Manual
11000 series secure content accelerator
Hide thumbs
Also See for CSS11501 - 100Mbps Ethernet Load Balancing Device:
- Hardware installation manual (184 pages) ,
- Datasheet (10 pages) ,
- Product support bulletin (3 pages)
Table of Contents
Advertisement
Configuration Command Set
keepalive enable
Usage Guidelines
Related Commands
keepalive frequency
Syntax Description
Usage Guidelines
Related Commands
Cisco 11000 Series Secure Content Accelerator Configuration Guide
C-154
Allows keepalive messages to be sent to the hardware server corresponding to the
current virtual server.
keepalive enable
no keepalive enable
Availability: Serial, Telnet; FIPS Mode (serial only)
Using the no form of the command disables sending of keepalive messages.
keepalive frequency (Server Configuration Command Set)
keepalive maxfailure (Server Configuration Command Set)
Specifies the interval between keepalive messages.
keepalive frequency <seconds>
seconds
Availability: Serial, Telnet; FIPS Mode (serial only)
keepalive enable (Server Configuration Command Set)
keepalive maxfailure (Server Configuration Command Set)
The number of seconds between keepalive messages;
the range is 1 to 255 seconds (inclusive); the default is
5 seconds
Appendix C
Command Summary
78-13124-05
Advertisement
Table of Contents
Troubleshooting
