Eaddr - Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device Configuration Manual
11000 series secure content accelerator
Hide thumbs
Also See for CSS11501 - 100Mbps Ethernet Load Balancing Device:
- Hardware installation manual (184 pages) ,
- Datasheet (10 pages) ,
- Product support bulletin (3 pages)
Table of Contents
Advertisement
Appendix D
MiniMax Command Summary
do
eaddr
Syntax Description
78-13124-05
Downloads a flash image via xmodem over the console serial port.
do
Sets and gets Ethernet addresses on the interfaces.
eaddr [-afhi[p <0|1>] [s <10|100>] [b <threeoctets>] [B <sixoctets>] ]
a
f
h
i
p
0
1
s
10
100
Cisco 11000 Series Secure Content Accelerator Configuration Guide
Option indicating autonegotiation (speed and duplex)
should be turned on for the specified Ethernet
interface(s).
Option indicating the specified Ethernet interface(s)
should be configured as full duplex.
Option indicating the specified Ethernet interface(s)
should be configured as half duplex.
Option indicating both Ethernet interfaces should be
configured with specifed parameters.
Option identifying the Ethernet interface to be
targeted by the configuration statement.
Option indicating the specifed configuration should be
applied to the "Network" interface.
Option indicating the specified configuration should
be applied to the "Server" interface.
Option indicating that interface speed will be
configured.
Option indicating the specified Ethernet interface(s)
should be configured as 10Mbit/sec.
Option indicating the specified Ethernet interface(s)
should be configured as 100Mbit/sec.
Command Set
D-11
Advertisement
Table of Contents
Troubleshooting
