Info; Ip Address - Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device Configuration Manual
11000 series secure content accelerator
Hide thumbs
Also See for CSS11501 - 100Mbps Ethernet Load Balancing Device:
- Hardware installation manual (184 pages) ,
- Datasheet (10 pages) ,
- Product support bulletin (3 pages)
Table of Contents
Advertisement
Appendix C
Command Summary
Usage Guidelines
info
Usage Guidelines
ip address
Syntax Description
Usage Guidelines
78-13124-05
prefixstring
session
Availability: Serial, Telnet; FIPS Mode (serial only)
(This command must be entered on one line.) Any combination of options can be
used currently. Use the no form of the command to cease using the specific option.
Displays current information about the logical secure server being edited or
created.
info
Availability: Serial, Telnet; FIPS Mode (serial only)
Sets the specified IP address for the logical secure server. Using the no form of
the command clears the IP address for the logical secure server.
ip address <ipaddr> [netmask <mask>]
no ip address
ipaddr
netmask <mask>
Availability: Serial, Telnet; FIPS Mode (serial only)
Cisco 11000 Series Secure Content Accelerator Configuration Guide
The string to use as a header prefix.
Adds SSL session information to the HTTP stream.
The IP address to assign to the secure server.
The netmask valid for the IP address.
Configuration Command Set
C-153
Advertisement
Table of Contents
Troubleshooting
