Table of Contents
Advertisement
EAS23720
INSTALLING THE ENGINE
ECA1S3L015
NOTICE
Install all of the bolts/nuts and then tighten
them to full torque specifications.
1. Install:
• Swingarm
• Pivot shaft
• Washer
• Pivot shaft nut
Refer to "INSTALLING THE SWINGARM" on
page 4-61.
TIP
Do not fully tighten the pivot shaft nut.
2. Install:
• Engine mounting bolt (lower)/nut
• Engine lower bracket (left)
• Engine lower bracket (right)
• Engine lower bracket bolts/nuts
• Engine mounting bolt (middle)/nut
• Engine upper bracket
• Engine upper bracket bolts
• Engine mounting bolt (upper)/nut
TIP
Do not fully tighten the bolts and nuts.
3. Tighten:
• Engine upper bracket bolt "1"
• Engine upper bracket bolt "2"
• Engine mounting bolt (upper)/nut "3"
• Pivot shaft nut "4"
• Engine mounting bolt (lower)/nut "5"
• Engine mounting bolt (middle)/nut "6"
• Engine lower bracket bolts/nuts "7"
TIP
Tighten the bolts and nuts in the proper tighten-
ing sequence as shown.
ENGINE REMOVAL
Engine upper bracket bolt "1"
33 Nm (3.3 m·kg, 24 ft·lb)
Engine upper bracket bolt "2"
33 Nm (3.3 m·kg, 24 ft·lb)
Engine mounting bolt (upper)/nut
"3"
40 Nm (4.0 m·kg, 29 ft·lb)
Pivot shaft nut "4"
100 Nm (10.0 m·kg, 72 ft·lb)
Engine mounting bolt (lower)/nut
"5"
66 Nm (6.6 m·kg, 48 ft·lb)
Engine mounting bolt (mid-
dle)/nut "6"
66 Nm (6.6 m·kg, 48 ft·lb)
Engine lower bracket bolts/nuts
"7"
41 Nm (4.1 m·kg, 30 ft·lb)
1
2
7
6
5-7
3
4
5
Advertisement
Chapters
Table of Contents
Troubleshooting
