Table of Contents
Advertisement
1. Throttle body
2. Air induction system hose (air filter case joint to air
cut-off valve)
3. Air filter case
4. Air filter case joint
5. Crankcase breather hose
6. Idle air hose
7. Cylinder head
8. Brake fluid reservoir
9. Fast idle plunger outlet hose
10. Air cut-off valve
11. Air induction system hose (air cut-off valve to reed
valve cover)
12. Fast idle plunger inlet hose
13. Fuel injection pipe
A. Install the crankcase breather hose up to the wide
portion of the hose fitting.
B. Point the ends of the hose clamp outward.
C. Install the idle air hose with its white paint mark
facing to the left.
D. Point the ends of the hose clamp downward.
E. When installing the air induction system hose (air
filter case joint to air cut-off valve), so that the hose
is not pinched between the air filter case joint and
the brake fluid reservoir.
F. Point the ends of the hose clamp rearward.
G. Install the fast idle plunger outlet hose with its
yellow paint mark facing to the right.
H. Connect the end of the air induction system hose
(air filter case joint to air cut-off valve) that is
identified by the red paint mark to the air cut-off
valve.
I.
Install the fast idle plunger inlet hose with its white
paint mark facing to the right.
J. Install the fast idle plunger outlet hose with its
white paint mark facing to the right.
K. Route the air induction system hose (air filter case
joint to air cut-off valve) under the fuel injection
pipe.
2-58
CABLE ROUTING
Advertisement
Chapters
Table of Contents
Troubleshooting
