Table of Contents
Advertisement
EAS1PE1001
ECU SELF-DIAGNOSTIC FUNCTION
The ECU is equipped with a self-diagnostic function in order to ensure that the fuel injection system is
operating normally. If this function detects a malfunction in the system, it immediately operates the en-
gine under substitute characteristics and illuminates the engine trouble warning light to alert the rider
that a malfunction has occurred in the system. Once a malfunction has been detected, a fault code is
stored in the memory of the ECU.
• To inform the rider that the fuel injection system is not functioning, the engine trouble warning light
flashes when the start switch is being pushed to start the engine.
• If a malfunction is detected in the system by the self-diagnostic function, the ECU provides an appro-
priate substitute characteristic operation, and alerts the rider of the detected malfunction by illuminat-
ing the engine trouble warning light.
• After the engine has been stopped, the lowest fault code number is indicated by the engine trouble
warning light (or displayed on the Yamaha diagnostic tool). It remains stored in the memory of the
ECU until it is deleted.
1. Engine trouble warning light
Engine trouble warning light fault code indication
Digit of 10: Cycles of 1 sec. on and 1.5 sec. off.
Digit of 1: Cycles of 0.5 sec. on and 0.5 sec. off.
Example: 42
a. Light on
b. Light off
c. 1 sec.
d. 1.5 sec.
e. 0.5 sec.
f. 3 sec.
FUEL INJECTION SYSTEM
1
8-31
Advertisement
Chapters
Table of Contents
Troubleshooting
