Table of Contents
Advertisement
EAS26510
DISASSEMBLING THE WATER PUMP
1. Remove:
• Water pump seal "1"
TIP
Remove the water pump seal from the inside of
the water pump housing "2".
2
2. Remove:
• Bearing "1"
• Oil seal "2"
TIP
Remove the bearing and oil seal from the out-
side of the water pump housing "3".
EAS26540
CHECKING THE WATER PUMP
1. Check:
• Water pump housing "1"
• Impeller "2"
• Water pump housing cover "3"
Cracks/damage/wear → Replace.
3
1
1
3
2
1
2
6-7
2. Check:
• Bearing
Rough movement → Replace.
• Impeller shaft gear
Pitting/wear → Replace.
EAS26560
ASSEMBLING THE WATER PUMP
1. Install:
• Oil seal "1"
New
(into the water pump housing "2")
TIP
• Before installing the oil seal, apply tap water or
coolant onto its outer surface.
• Install the oil seal with a socket "3" that match-
es its outside diameter.
1
New
2
2. Install:
• Water pump seal "1"
(into the water pump housing "2")
ECA14080
NOTICE
Never lubricate the water pump seal surface
with oil or grease.
TIP
Install the water pump seal with the special tools.
Mechanical seal installer
90890-04132
Water pump seal installer
YM-33221-A
Middle driven shaft bearing driv-
er
90890-04058
Middle drive bearing installer 40
& 50 mm
YM-04058
WATER PUMP
3
0.5–1.0 mm
(0.02–0.04 in)
New
Advertisement
Chapters
Table of Contents
Troubleshooting
