hit counter script
Yamaha RAPTOR 700 Owner's Manual
  1. Manuals
  2. Brands
  3. Yamaha Manuals
  4. Offroad Vehicle
  5. RAPTOR 700
  6. Owner's manual

Yamaha RAPTOR 700 Owner's Manual

Hide thumbs Also See for RAPTOR 700:
Table of Contents

Advertisement

Quick Links

READ THIS MANUAL CAREFULLY!
It contains important safety information.
OWNER'S MANUAL
YFM700RV
w
This ATV should not be ridden by anyone under 16 years of age.
LIT-11626-19-59
1S3-28199-11

Advertisement

Table of Contents
loading

Related Manuals for Yamaha RAPTOR 700

Summary of Contents for Yamaha RAPTOR 700

  • Page 1 READ THIS MANUAL CAREFULLY! It contains important safety information. OWNER’S MANUAL YFM700RV This ATV should not be ridden by anyone under 16 years of age. LIT-11626-19-59 1S3-28199-11...
  • Page 3 EBU13320 INTRODUCTION Congratulations on your purchase of the Yamaha YFM700R. It represents the result of many years of Yamaha experience in the production of fine sporting, touring, and pacesetting racing machines. With the purchase of this Yamaha, you can now appreciate the high degree of craftsmanship and reliability that have made Yamaha a leader in these fields.
  • Page 4 EBU08010 IMPORTANT MANUAL INFORMATION FAILURE TO FOLLOW THE WARNINGS CONTAINED IN THIS MANUAL CAN RESULT IN SERI- OUS INJURY OR DEATH. Particularly important information is distinguished in this manual by the following notations: The Safety Alert Symbol means ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! Failure to follow WARNING instructions could result in severe injury or death to the machine operator, a bystander or a person inspecting or repairing the...
  • Page 5 Please check your local riding laws and regulations before operating this ATV. EBU13330 YFM700RV OWNER’S MANUAL ©2005 by Yamaha Motor Corporation, AFFIX DEALER U.S.A. LABEL HERE 1st edition, June 2005 All rights reserved.

  • Page 6: Table Of Contents

    EBU00140 CONTROL FUNCTIONS ...... 4-1 Indicates a potential hazard that could result Main switch ......... 4-1 in serious injury or death. Indicator and warning lights ....4-2 Handlebar switches ......4-4 Throttle lever ........4-6 CONTENTS Speed limiter ........4-7 Clutch lever ........
  • Page 7 Engine break-in ........6-7 PRE-OPERATION CHECKS ....5-1 Parking ..........6-8 Front and rear brakes ......5-3 Parking on a slope ......6-8 Fuel ............ 5-4 Accessories and loading ....6-10 Engine oil ..........5-6 Coolant ..........5-6 RIDING YOUR ATV ......7-1 Chain ..........
  • Page 8 PERIODIC MAINTENANCE AND Parking brake ad justment ....8-33 ADJUSTMENT ........8-1 Adjusting the rear brake light switch ..8-35 Owner’s manual and tool kit ....8-1 Clutch lever free play adjustment ..8-36 Drive chain slack check ....8-38 Periodic maintenance chart for the emission control system ....
  • Page 9 CLEANING AND STORAGE ....9-1 A. CLEANING ........9-1 B. STORAGE ........9-3 SPECIFICATIONS ......10-1 NOISE REGULATION ......11-1 MAINTENANCE RECORD ....12-1 ATV LIMITED WARRANTY ....13-1 YAMAHA EXTENDED SERVICE (Y.E.S.) ..........14-1...

  • Page 10: Location Of The Warning And Specification Labels

    EBU04640 LOCATION OF THE WARNING AND SPECIFICATION LABELS...
  • Page 11 They contain important information for safe and proper operation of your ATV. Never remove any labels from your ATV. If a label becomes difficult to read or comes off, a replacement label is available from your Yamaha dealer. 5FE-21697-01 5FE-21568-01...
  • Page 12 WARNING NEVER ride as a passenger. Passengers can cause a loss of control, resulting in SEVERE INJURY or DEATH. 5FE-2151H-01 5FE-2151H-40...

  • Page 13: Safety Information

    EBU15760 SAFETY INFORMATION AN ATV IS NOT A TOY AND CAN BE HAZARDOUS TO OPERATE. An ATV handles differently from other vehicles including motorcycles and cars. A collision or rollover can occur quickly, even during routine maneuvers such as turning and riding on hills or over obstacles, if you fail to take proper precautions.
  • Page 14 8 Always avoid operating an ATV on any paved surfaces, including sidewalks, driveways, parking lots and streets. 8 Never operate an ATV on any public street, road or highway, even a dirt or gravel one. 8 Never operate an ATV without wearing an approved motorcycle helmet that fits properly. You should also wear eye protection (goggles or face shield), gloves, boots, a long-sleeved shirt or jack- et, and long pants.
  • Page 15 8 Always follow proper procedures for turning as described in this manual. Practice turning at low speeds before attempting to turn at faster speeds. Do not turn at excessive speed. 8 Never operate the ATV on hills too steep for the ATV or for your abilities. Practice on smaller hills before attempting larger hills.
  • Page 16 8 Always use proper procedures if you stall or roll backwards when climbing a hill. To avoid stalling, use the proper gear and maintain a steady speed when climbing a hill. If you stall or roll backwards, follow the special procedure for braking described in this manual. Dismount on the uphill side or to a side if pointed straight uphill.
  • Page 17 8 Always use the size and type of tires specified in this manual. 8 Always maintain proper tire pressure as described in this manual. 8 Never modify an ATV through improper installation or use of accessories. 8 Never exceed the stated load capacity for an ATV. Cargo should be properly distributed and securely attached.
  • Page 18 q WARNING When transporting the ATV in another vehicle, be sure it is kept upright. POTENTIAL HAZARD Otherwise, fuel may leak out of the fuel Improper handling of gasoline. tank. WHAT CAN HAPPEN WHAT CAN HAPPEN Gasoline can catch fire and you could be Gasoline is poisonous and can cause burned.
  • Page 19 q WARNING POTENTIAL HAZARD Starting or running the engine in a closed area. WHAT CAN HAPPEN Exhaust fumes are poisonous and may cause loss of consciousness and death within a short time. HOW TO AVOID THE HAZARD Always operate your ATV in an area with adequate ventilation.

  • Page 20: Description And Machine Identification

    EBU00320 DESCRIPTION AND MACHINE IDENTIFICATION 1. Spark arrester 10. Clutch lever 2. Seat 11. Parking brake lever 3. Headlight 12. Main switch 4. Brake pedal 13. Brake lever 5. Engine oil tank 14. Throttle lever 6. Coolant reservoir 15. Reverse knob 7.

  • Page 21: Identification Number Records

    This tion in the spaces provided for assistance when number can be used for ordering a new key. ordering spare parts from a Yamaha dealer or for reference in case the vehicle is stolen. 1. KEY IDENTIFICATION NUMBER: 2.

  • Page 22: Vehicle Identification Number

    The model label is affixed to the location in the into the frame. illustration. Record the information on this label in the space provided. This information will be needed to order spare parts from your Yamaha dealer. 1. Vehicle identification number NOTE: The vehicle identification number is used to 1.

  • Page 23: Control Functions

    EBU00390 CONTROL FUNCTIONS Indicates a potential hazard that could result in serious injury or death. EBU09420 Main switch Functions of the respective switch positions are as follows: The engine can be started only at this position and the headlights and taillight come on when the light switch is on.

  • Page 24: Indicator And Warning Lights

    The electrical circuit of the warning light can be checked by turning the key to “ON”. If the warn- ing light does not come on, and then go off, have a Yamaha dealer check the electrical cir- 1. Neutral indicator light “N” 2. Reverse indicator light “R”...
  • Page 25 “RUN” and turning the key to “ON”. have a Yamaha dealer check the electrical cir- If the warning light does not come on, and then cuit. go off, have a Yamaha dealer check the electri- cal circuit.

  • Page 26: Handlebar Switches

    EBU00530 EBU11560 Handlebar switches Light switch “LIGHTS” Set the switch to the “LO” position to turn on the low beam and the taillight. Set the switch to the “HI” position to turn on the high beam and the taillight. Set the switch to the “OFF” position to turn off all of the lights.
  • Page 27 EBU11580 EBU06470 Engine stop switch “ENG. STOP” Start switch “START” Make sure that the engine stop switch is in the The starter motor cranks the engine when this “RUN” position before starting the engine. The switch is pushed. engine stop switch controls ignition and can be used at all times to stop the engine, especially in See the starting instructions on page an emergency.

  • Page 28: Throttle Lever

    Check the operation of the throttle lever before you start the engine. If it does not 1. Throttle lever work smoothly, check for the cause. Correct the problem before riding the ATV. Consult a Yamaha dealer if you canít find or solve the problem yourself.

  • Page 29: Speed Limiter

    EBU11590 q WARNING Speed limiter The speed limiter keeps the throttle from fully POTENTIAL HAZARD opening, even when the throttle lever is pushed Improper adjustment of the speed limiter to the maximum. Turning in the adjusting screw and throttle. limits the maximum engine power available and WHAT CAN HAPPEN decreases the maximum speed of the ATV.

  • Page 30: Clutch Lever

    EBU00690 EBU09880 Clutch lever Brake lever The clutch lever is located on the left handlebar The brake lever is located on the right handle- and the ignition circuit cut-off system is incorpo- bar. Pull it toward the handlebar to apply the rated in the clutch lever holder.

  • Page 31: Brake Pedal

    EBU09890 Brake pedal The brake pedal is located on the right side of the machine. Push down on the pedal to apply the rear brake. 1. Brake pedal...

  • Page 32: Parking Brake Lever

    EBU13870 Parking brake lever Use the parking brake when you have to start the engine or park the machine, especially on a slope. To apply the parking brake, move the parking brake lever in direction a. To release the parking brake, move the parking brake lever in direction b.

  • Page 33: Shift Pedal

    EBU07880 q WARNING Shift pedal This machine is equipped with a constant-mesh POTENTIAL HAZARD 5-speed forward and 1-speed reverse transmis- Improper use of the parking brake. sion. The shift pedal is located on the left side of WHAT CAN HAPPEN the engine and is used in combination with the clutch when shifting.

  • Page 34: Reverse Knob

    EBU10280 EBU00920 Reverse knob “REV” Fuel tank cap The reverse knob is used to shift into reverse Remove the fuel tank cap by turning it counter- gear. clockwise. Refer to the “Reverse knob operation and reverse driving” section (page 6-3) before oper- ating this machine in reverse gear.

  • Page 35: Seat

    EBU16020 Seat To install the seat, insert the projections on the To remove the seat, insert your hand between front of the seat into the seat holders and push the rear of the seat and the rear fender, pull the down on the seat at the rear.

  • Page 36: Front Shock Absorber Adjustment

    EBU11040 NOTE: Front shock absorber adjustment A special wrench can be obtained at a Yamaha The spring preload can be adjusted to suit the dealer to make this adjustment. rider’s weight and riding conditions. Adjust the spring preload as follows.
  • Page 37 q WARNING POTENTIAL HAZARD Improper shock absorber adjustment. WHAT CAN HAPPEN Uneven adjustment can cause poor han- dling and loss of stability, which could lead to an accident. HOW TO AVOID THE HAZARD Always adjust the shock absorbers on the left and right side to the same setting.

  • Page 38: Adjusting The Rear Shock Absorber

    8 Do not dispose of a damaged or worn absorber can be adjusted to suit the rider’s out shock absorber yourself. Take the weight and the riding conditions. unit to a Yamaha dealer. q WARNING Adjust the spring preload as follows. POTENTIAL HAZARD 1.
  • Page 39 NOTE: 4. Tighten the locknut to the specified torque. A special wrench can be obtained at a Yamaha dealer to make this adjustment. Tightening torque: 42 Nm (4.2 m0kgf, 30 ft0lbf) 3. The length of the spring (installed) changes 1.5 mm (0.06 in) per turn of the adjusting nut.
  • Page 40 Adjust the rebound damping force as follows. Adjust the compression damping force as fol- Turn the rebound damping force adjusting screw lows. in direction a to increase the rebound damping Turn the compression damping force adjusting force and in direction b to decrease the screw in direction a to increase the compres- sion damping force and in direction b to rebound damping force.
  • Page 41 q WARNING Never turn an adjusting mechanism beyond POTENTIAL HAZARD the minimum and maximum settings. Suspension components become hot dur- ing operation. NOTE: WHAT CAN HAPPEN Although the total number of clicks of a damping You could be burned. force adjusting mechanism may not exactly HOW TO AVOID THE HAZARD match the above specifications due to small dif- Never touch the compression damping...

  • Page 42: Pre-Operation Checks

    PRE-OPERATION CHECKS Before using this machine, check the following points: ITEM ROUTINE PAGE 9 Check operation, free play, fluid level and fluid leakage. 5-3–5-4 Front brake 9 Fill with DOT 4 brake fluid if necessary. 8-27–8-32 9 Check operation, free play, fluid level and fluid leakage. 5-3–5-4 Rear brake 9 Fill with DOT 4 brake fluid if necessary.
  • Page 43 q WARNING POTENTIAL HAZARD Failure to inspect the ATV before operat- ing. Failure to properly maintain the ATV. WHAT CAN HAPPEN Increases the possibility of an accident or equipment damage. HOW TO AVOID THE HAZARD Always inspect your ATV each time you use it to make sure the ATV is in safe operating condition.

  • Page 44: Front And Rear Brakes

    8 Check that there is no free play in the brake the pipe joints or brake fluid reservoirs. Apply lever. If there is free play, have a Yamaha the brakes firmly for one minute. If there is any dealer inspect the brake system.

  • Page 45: Fuel

    Yamaha dealer check for the cause. ton rings, as well as to the exhaust system. Your Yamaha engine has been designed to use regular unleaded gasoline with a pump octane number ([R+M]/2) of 86 or higher, or research octane number of 91 or higher.
  • Page 46 10%. Gasohol containing methanol is not recommended by Fuel can spill, which can cause a fire and Yamaha because it may cause fuel system severe injury. damage or vehicle performance problems. Fuel expands when it heats up. If the fuel tank is overfilled, fuel could spill out due to heat from the engine or the sun.

  • Page 47: Engine Oil

    EBU10842 EBU12530 Engine oil Coolant Make sure the engine oil is at the specified level. Check the coolant level in the coolant reservoir Add oil as necessary. (See page 8-8.) when the engine is cold. (The coolant level will vary with engine temperature.) The coolant level is satisfactory if it is between the minimum and maximum level marks on the coolant reservoir.

  • Page 48: Chain

    Check to see that the throttle lever operates cor- rectly. It must open smoothly and spring back to HOW TO AVOID THE HAZARD the idle position when released. Have a Yamaha Wait for the engine to cool before remov- dealer repair as necessary for proper operation.

  • Page 49: Tires

    HOW TO AVOID THE HAZARD The following are minimums: 1. The tires listed below have been Front 24.5 kPa (0.245 kgf/cm , 3.5 psi) approved by Yamaha Motor Co., Ltd. Rear 24.5 kPa (0.245 kgf/cm , 3.5 psi) for this model. Other tire combinations 4.

  • Page 50: How To Measure Tire Pressure

    EBU01590 How to measure tire pressure Use the low-pressure tire gauge. NOTE: The low-pressure tire gauge is included as stan- dard equipment. Make two measurements of the tire pressure and use the second reading. Dust or dirt in the gauge could cause the first reading to be incorrect.

  • Page 51: Tire Wear Limit

    When the tire groove decreases to 3 mm (0.12 and fasteners before a ride. Take the machine in) due to wear, replace the tire. to a Yamaha dealer or refer to the Service Manual for correct tightening torque. EBU10030 Lights Check the headlights and tail/brake light to make sure they are in working condition.

  • Page 52: Operation

    HOW TO AVOID THE HAZARD Read the Ownerís Manual carefully. If 1. Set the parking brake. there is a control or function you do not 2. Turn the main switch to “ON” and the engine understand, ask your Yamaha dealer. stop switch to “RUN”.
  • Page 53 5. Continue warming up the engine until it idles The neutral indicator light should come on. If smoothly. the light does not come on, ask a Yamaha dealer to inspect it. See the “Engine break-in” section prior to operating engine for the first time.

  • Page 54: Reverse Knob Operation And Reverse Driving

    If the light does not come on, ask 3. Apply the clutch lever and shift the transmis- a Yamaha dealer to inspect the machine. sion into reverse by pressing down on the shift pedal.

  • Page 55: Shifting

    EBU11730 q WARNING Shifting This model has a 5-speed forward and 1-speed POTENTIAL HAZARD reverse transmission. The transmission allows Improperly operating in reverse. you to control the amount of power you have WHAT CAN HAPPEN available at a given speed or for starting, accel- erating, climbing hills, etc.

  • Page 56: To Start Out And Accelerate

    EBU02030 To start out and accelerate: 1. Release the throttle lever. 8 Do not coast for long periods with the engine off, and do not tow the machine a long distance. Even in neutral position, the Always close the throttle while shifting transmission is only properly lubricated gears.

  • Page 57: To Decelerate

    EBU02070 q WARNING To decelerate: When slowing down or stopping, release the POTENTIAL HAZARD throttle and apply the brakes smoothly and Opening the throttle abruptly or releasing evenly. As you slow down, shift to a lower gear. Be sure that the engine has sufficiently slowed the clutch lever too quickly.

  • Page 58: Engine Break-In

    20 hours. If any abnormality is noticed during this period, For this reason, we ask that you carefully read consult a Yamaha dealer. the following material. Because the engine is brand new, you must not put an excessive load 0-10 hours: on it for the first several hours of running.

  • Page 59: Parking

    EBU15970 EBU14200 Parking Parking on a slope When parking, stop the engine, shift into first q WARNING gear, and then apply the parking brake. POTENTIAL HAZARD Parking on a hill or other incline. WHAT CAN HAPPEN The ATV could roll out of control, increas- ing the chance of an accident.
  • Page 60 1. Bring the machine to a stop by applying the front brake. 2. With the front and rear brake applied, pull the clutch lever, shift into the neutral posi- tion, and then apply the parking brake. 3. Stop the engine by setting the engine stop switch to “OFF”.

  • Page 61: Accessories And Loading

    Yamaha accessories. Other acces- than it does without accessories. sories may also be available on the market. However, it is not possible for Yamaha to test all non-Yamaha accessories, nor have any control over the quality or suitability of them.
  • Page 62 EBU05840 8 Tie down cargo securely to the carriers. Make Loading As originally equipped, this ATV is not designed sure cargo in the trailer cannot move around. to carry cargo or tow a trailer. If you choose to A shifting load can cause an accident. 8 Make sure the load does not interfere with add accessories so that you can carry cargo or tow a trailer, you must use common sense and...
  • Page 63 q WARNING POTENTIAL HAZARD Overloading this ATV or carrying or tow- ing cargo improperly. WHAT CAN HAPPEN Could cause changes in vehicle handling which could lead to an accident. HOW TO AVOID THE HAZARD Never exceed the stated load capacity for this ATV.
  • Page 64 EBU13552 Indicates a potential hazard that could result in serious injury or death. 6-13...

  • Page 65: Riding Your Atv

    Riding Your...

  • Page 66: Getting To Know Your Atv

    Indicates a potential hazard that could result in serious injury or death. GETTING TO KNOW YOUR ATV controls. Pay particular attention to the safety This ATV is intended for recreational use by information on pages 2-1–2-7. Please also read experienced operators only. all caution and warning labels on your ATV.

  • Page 67: Ride With Care And Good Judgement

    Get training if you are inexperienced. should complete the certified training Beginners should get training from a certified course offered by Yamaha. They should instructor. then regularly practice the skills learned in Become familiar with this ATV at slow speeds the course and the operating techniques first, even if you are an experienced operator.
  • Page 68 Not recommended for children under 16 years of age. q WARNING POTENTIAL HAZARD Failure to follow the age recommendations for this ATV. WHAT CAN HAPPEN Use by children of ATVs that are not rec- ommended for their age can lead to severe injury or death of the child.
  • Page 69 This ATV is designed to carry operator only - passengers prohibited. q WARNING POTENTIAL HAZARD Carrying a passenger on this ATV. WHAT CAN HAPPEN Greatly reduces your ability to balance and control this ATV. Could cause an acci- dent, resulting in harm to you and/or your passenger.
  • Page 70 Apparel Operating without protective clothing q WARNING increases your chances of severe injury in the event of an accident. POTENTIAL HAZARD HOW TO AVOID THE HAZARD Operating this ATV without wearing an Always wear an approved motorcycle hel- approved motorcycle helmet, eye protec- met that fits properly.
  • Page 71 Do not operate after consuming alcohol or q WARNING drugs. POTENTIAL HAZARD Operator’s performance capability is reduced by the influence of alcohol or drugs. Operating this ATV after consuming alco- hol or drugs. WHAT CAN HAPPEN Could seriously affect your judgment. Could cause you to react more slowly.
  • Page 72 Pre-operation checks q WARNING Always perform the pre-operation checks listed POTENTIAL HAZARD on page 5-1 before riding for safety and proper care of the ATV. Operating this ATV with improper tires, or with improper or uneven tire pressure. q WARNING WHAT CAN HAPPEN Use of improper tires on this ATV, or oper- POTENTIAL HAZARD...
  • Page 73 Speed limiter For riders inexperienced with this model, this Indicates a potential hazard that could result model is equipped with a speed limiter in the in serious injury or death. throttle lever housing. The speed limiter limits the power and top speed of the ATV. Turning Do not operate at speeds too fast for your the adjusting screw in decreases the top speed, skills or the conditions.
  • Page 74 Loading and accessories q WARNING As originally equipped, this ATV is not designed POTENTIAL HAZARD to carry cargo or tow a trailer. If you choose to add accessories so that you can carry cargo or Overloading this ATV or carrying or tow- tow a trailer, you must use common sense and ing cargo improperly.
  • Page 75 During operation q WARNING Always keep your feet on the footboards during POTENTIAL HAZARD operation. Otherwise your feet may contact the rear wheels. Removing hands from handlebars or feet from footboards during operation. WHAT CAN HAPPEN Removing even one hand or foot can reduce your ability to control the ATV or could cause you to lose your balance and fall off of the ATV.
  • Page 76 Avoid wheelies and jumping. You may lose con- trol of the ATV or overturn. q WARNING POTENTIAL HAZARD Attempting wheelies, jumps, and other stunts. WHAT CAN HAPPEN Increases the chance of an accident, including an overturn. HOW TO AVOID THE HAZARD Never attempt stunts, such as wheelies or jumps.
  • Page 77 Never modify this ATV through improper installation or use of accessories. All parts and accessories added to this vehicle should be genuine Yamaha or equivalent components designed for use on this ATV and should be installed and used accord- ing to instructions. If you have questions, consult an authorized ATV dealer.
  • Page 78 Exhaust system HOW TO AVOID THE HAZARD The exhaust system on the ATV is very hot dur- Do not operate, idle, or park the ATV in dry ing and following operation. To prevent burns, grass or other dry ground cover. avoid touching the exhaust system.

  • Page 79: Be Careful Where You Ride

    BE CAREFUL WHERE YOU RIDE This ATV is designed for off-road use only. Riding on paved surfaces can cause loss of con- trol. q WARNING POTENTIAL HAZARD Operating this ATV on paved surfaces. WHAT CAN HAPPEN ATVs are designed for off-road use only. Paved surfaces may seriously affect han- dling and control of the ATV, and may cause the vehicle to go out of control.
  • Page 80 Do not ride on any public road, street, or high- way. Riding on public roads can result in collisions with other vehicles. q WARNING POTENTIAL HAZARD Operating this ATV on public streets, roads or highways. WHAT CAN HAPPEN You can collide with another vehicle. HOW TO AVOID THE HAZARD Never operate this ATV on any public street, road or highway, even a dirt or...
  • Page 81 Know the terrain where you ride. Ride cautiously in unfamiliar areas. Stay alert for holes, rocks, or roots in the terrain, and other hidden haz- ards which may cause the ATV to upset. q WARNING POTENTIAL HAZARD Failure to use extra care when operating this ATV on unfamiliar terrain.
  • Page 82 q WARNING POTENTIAL HAZARD Failure to use extra care when operating on excessively rough, slippery or loose terrain. WHAT CAN HAPPEN Could cause loss of traction or vehicle control, which could result in an accident, including an overturn. HOW TO AVOID THE HAZARD Do not operate on excessively rough, slip- pery or loose terrain until you have learned and practiced the skills necessary...
  • Page 83 When riding in an area where you might not WHAT CAN HAPPEN easily be seen, such as desert terrain, mount a You could be in a collision. You could be caution flag on the ATV. DO NOT use the flag injured.
  • Page 84 Select a large, flat area off-road to become With the engine idling, pull the clutch lever to familiar with your ATV. Make sure that this area disengage the clutch and shift into 1st gear, and is free of obstacles and other riders. You should then release the parking brake.
  • Page 85 q WARNING When slowing down or stopping, release the throttle and apply the brakes smoothly and POTENTIAL HAZARD evenly. As you slow down, shift to a lower gear. Opening the throttle abruptly or releasing Be sure that the engine has sufficiently slowed the clutch lever too quickly.

  • Page 86: Turning Your Atv

    TURNING YOUR ATV HOW TO AVOID THE HAZARD To achieve maximum traction while riding off- Always follow proper procedures for turn- road, the two rear wheels are mounted solidly ing as described in this Owner’s Manual. on one axle and turn together at the same Practice turning at low speeds before speed.
  • Page 87 Once you have learned this technique you should be able to perform it at higher speeds or in tighter curves. Improper riding procedures such as abrupt throt- tle changes, excessive braking, incorrect body movements, or too much speed for the sharp- ness of the turn may cause the ATV to tip.

  • Page 88: Climbing Uphill

    CLIMBING UPHILL HOW TO AVOID THE HAZARD Use proper riding techniques to avoid vehicle Never operate the ATV on hills too steep overturns on hills. Be sure that you can maneu- for the ATV or for your abilities. ver your ATV well on flat ground before attempt- Practice on smaller hills before attempting ing any incline and then practice riding first on large hills.
  • Page 89 q WARNING Never go over the top of any hill at high speed. POTENTIAL HAZARD An obstacle, a sharp drop, or another Climbing hills improperly. vehicle or person could be on the other WHAT CAN HAPPEN side of the hill. Could cause loss of control or cause the ATV to overturn.
  • Page 90 If you are climbing a hill and you find that you When crossing the side of a hill: have not properly judged your ability to make it Always follow proper procedures as to the top, you should turn the ATV around while described in the Owner’s Manual.
  • Page 91 If your ATV has stalled or stopped and you q WARNING believe you can continue up the hill, restart care- POTENTIAL HAZARD fully to make sure you do not lift the front wheels Stalling, rolling backwards or improperly which could cause you to lose control. If you are dismounting while climbing a hill.
  • Page 92 When fully stopped, apply the rear brake as well, and then lock the parking brake. Dismount on uphill side or to a side if pointed straight uphill. Turn the ATV around and remount, following the proce- dure described in the Owner’s Manual. 7-29...

  • Page 93: Riding Downhill

    RIDING DOWNHILL q WARNING When riding your ATV downhill, shift your weight POTENTIAL HAZARD as far to the rear and uphill side of the ATV as possible. Move back on the seat and sit with Going down a hill improperly. your arms straight.
  • Page 94 7-31...

  • Page 95: Crossing A Slope

    CROSSING A SLOPE q WARNING Traversing a sloping surface on your ATV POTENTIAL HAZARD requires you to properly position your weight to maintain proper balance. Be sure that you have Improperly crossing hills or turning on learned the basic riding skills on flat ground hills.
  • Page 96 Shift your weight to the uphill side of the ATV. 7-33...

  • Page 97: Crossing Through Shallow Water

    CROSSING THROUGH SHALLOW WATER Remember that wet brakes may have The ATV can be used to cross slow moving, reduced stopping ability. Test your brakes shallow water of up to a maximum of 35 cm (14 after leaving water. If necessary, apply inches) in depth.
  • Page 98 Test your brakes after leaving the water. Do not continue to ride your ATV without verifying that After riding your ATV in water, be sure to you have regained proper braking ability. drain the trapped water by removing the check hose at the bottom of the air filter case.

  • Page 99: Riding Over Rough Terrain

    RIDING OVER ROUGH TERRAIN q WARNING Riding over rough terrain should be done with POTENTIAL HAZARD caution. Look out for obstacles which could cause damage to the ATV or could lead to an Improperly operating over obstacles. upset or accident. Be sure to keep your feet WHAT CAN HAPPEN firmly mounted on the footboards at all times.
  • Page 100 7-37...

  • Page 101: Sliding And Skidding

    SLIDING AND SKIDDING If the rear wheels of your ATV start to slide side- Care should be used when riding on loose or ways, control can usually be regained (if there is slippery surfaces since the ATV may slide. If room to do so) by steering in the direction of the unexpected and uncorrected, sliding could lead slide.
  • Page 102 With practice, over a period of time, skill at con- q WARNING trolled sliding can be developed. The terrain POTENTIAL HAZARD should be chosen carefully before attempting Skidding or sliding improperly. such maneuvers, since both stability and control are reduced. Bear in mind that sliding maneu- WHAT CAN HAPPEN vers should always be avoided on extremely You may lose control of this ATV.

  • Page 103: What To Do If

    WHAT TO DO IF ... 8 If your ATV starts to slide sideways: This section is designed to be a reference guide Steer in the direction of the slide if you have only. Be sure to read each section on riding the room.
  • Page 104 8 If your ATV is traversing a sloping surface: Be sure to ride with your weight positioned towards the uphill side of the ATV to maintain proper balance. If the ATV starts to tip, steer down the hill (if there are no obstacles in your way) to regain balance.

  • Page 105: Periodic Maintenance And Adjustment

    Turn off the engine when performing maintenance unless otherwise specified. Periodic inspection, adjustment and lubrication Have a Yamaha dealer perform service if will keep your machine in the safest and most you are not familiar with machine service. efficient condition possible. Safety is an obliga- tion of the machine owner.
  • Page 106 Never modify this ATV through improper during a service operation requiring one, take installation or use of accessories. All parts your machine to a Yamaha dealer to check the and accessories added to this vehicle torque settings and adjust them as necessary.

  • Page 107: Periodic Maintenance Chart For The Emission Control System

    ATV isn’t used for a long period of time, the month maintenance intervals should be followed. 8 Items marked with an asterisk should be performed by a Yamaha dealer as they require special tools, data and technical skills.

  • Page 108: General Maintenance And Lubrication Chart

    EBU15720 General maintenance and lubrication chart INITIAL EVERY month Whichever comes first ITEM ROUTINE 1300 2500 2500 5000 (mi) (200) (800) (1600) (1600) (3200) hours 9 Clean. Every 20–40 hours Air filter element 9 Replace if necessary. (more often in wet or dusty areas) 9 Check operation.
  • Page 109 INITIAL EVERY month Whichever comes first ITEM ROUTINE 1300 2500 2500 5000 (mi) (200) (800) (1600) (1600) (3200) hours 9 Check operation. 9 Repair if damaged. Steering system* 9 Check toe-in. 9 Adjust if necessary. 9 Replace (Warm engine before draining). Engine oil Engine oil filter 9 Replace.
  • Page 110 NOTE: 8 Recommended brake fluid: DOT 4 8 Brake fluid replacement: When disassembling the master cylinder or caliper cylinder, replace the brake fluid. Normally check the brake fluid level and add the fluid as required. On the inner parts of the master cylinder and caliper cylinder, replace the oil seals every two years.

  • Page 111: Panel Removal And Installation

    EBU08070 EBU10130 Panel removal and installation Panel A 1. Panel A 1. Panel A 2. Bolt (× 2) The panel illustrated needs to be removed to To remove perform some of the maintenance described in Remove the bolts, and then take the panel off. this chapter.

  • Page 112: Engine Oil And Oil Filter Element

    EBU15912 Engine oil and oil filter element 3. Remove the engine oil tank filler cap, wipe The engine oil level should be checked before the dipstick clean with a clean rag, insert it each ride. In addition, the oil must be changed back into the filler hole (without screwing it and the oil filter element replaced at the intervals in), and then remove it again to check the...
  • Page 113 4. If the engine oil is below the minimum level To change the engine oil (with or without oil mark, add sufficient oil of the recommend- filter element replacement) ed type through the engine oil tank filler 1. Start the engine, warm it up for several hole to raise it to the correct level.
  • Page 114 5. Check the washers for damage, and replace if necessary. NOTE: Skip steps 6–9 if the oil filter element is not being replaced. 6. Remove the oil filter element cover by removing the bolts, and then remove the oil filter element. 1.
  • Page 115 7. Check the O-rings for damage, and 9. Install the oil filter element cover by replace them if necessary. installing the bolts, and then tighten them to the specified torque. Tightening torque: Oil filter element cover bolt: 10 Nm (1.0 m0kgf, 7.2 ft0lbf) 10.
  • Page 116 11. Install the crankcase engine oil filler cap, and then tighten it to the specified torque. 8 In order to prevent clutch slippage (since Tightening torque: the engine oil also lubricates the clutch), Crankcase engine oil filler cap: do not mix any chemical additives. Do not 12 Nm (1.2 m0kgf, 8.7 ft0lbf) use oils with a diesel specification of “CD”...

  • Page 117: Cooling System

    You may use soft water if you can’t get distilled water. NOTE: 8 If water is added, have a Yamaha dealer check the antifreeze content of the coolant as soon as possible. 8 The radiator fan operation is completely auto- matic.

  • Page 118: Changing The Coolant

    EBU10162 Changing the coolant 1. Place the ATV on a level surface. 2. Remove panel A. (See page 8-7 for panel q WARNING removal and installation procedures.) POTENTIAL HAZARD 3. Place a container under the engine, and then remove the coolant drain bolt. Removing the radiator cap when the engine and radiator are still hot.
  • Page 119 4. Remove the radiator cap. 5. Remove the coolant reservoir cap. 6. Disconnect the hose on the coolant reser- voir side, and then drain the coolant from the coolant reservoir. 1. Radiator cap 1. Coolant reservoir cap 2. Hose 7. After draining the coolant, thoroughly flush the cooling system with clean tap water.
  • Page 120 15. Start the engine and then check for coolant Antifreeze and water mixing ratio: leakage. NOTE: Total amount: If any leakage is found, have a Yamaha dealer 1.61 L (1.42Imp qt, 1.70US qt) check the cooling system. Coolant reservoir capacity (up to the maximum level mark): 16.

  • Page 121: Spark Plug Inspection

    EBU14550 Spark plug inspection 2. Use the spark plug wrench in the owner’s Removal tool kit to remove the spark plug as shown. 1. Remove the spark plug cap. 1. Spark plug wrench 1. Spark plug cap 8-17...
  • Page 122 ATV that is being ridden normally. Do not attempt to diagnose such problems your- self. Instead, take the ATV to a Yamaha dealer. You should periodically remove and inspect the spark plug because heat and deposits will cause the spark plug to slowly break down and erode.

  • Page 123: Air Filter Element Cleaning

    EBU15800 3. Install the spark plug and tighten it to the Air filter element cleaning specified torque. NOTE: There is a check hose at the bottom of the air fil- Tightening torque: ter case. If dust or water collects in this hose, Spark plug: empty the hose and clean the air filter element 12.5 Nm (1.25 m0kgf, 9.1 ft0lbf)
  • Page 124 2. Remove the air filter case cover by unhooking the holders. 1. Wing bolt 2. Air filter element 4. Remove the sponge material from its frame. 1. Air filter case cover 2. Holder (× 4) 3. Remove the air filter element by removing the wing bolt.
  • Page 125 5. Wash the sponge material gently but thor- 7. Inspect the sponge material and replace it oughly in solvent. if damaged. 8. Apply Yamaha foam air filter oil or other q WARNING quality foam air filter oil to the sponge POTENTIAL HAZARD material.

  • Page 126: Spark Arrester Cleaning

    EBU13633 Spark arrester cleaning NOTE: Select a well-ventilated area free of combustible The air filter element should be cleaned every materials and make sure the exhaust and muf- 20-40 hours. It should be cleaned and lubricated more often if the ATV is operated in extremely fler are cool.
  • Page 127 2. Remove the tailpipe by pulling it out of the 4. Insert the tailpipe into the muffler and align muffler. the bolt holes. 3. Tap the tailpipe lightly, then use a wire 5. Install the bolt and tighten it. brush to remove any carbon deposits from 6.
  • Page 128 q WARNING 7. Start the engine and rev it up approximate- ly twenty times while momentarily creating POTENTIAL HAZARD exhaust system back pressure by blocking Improperly purging the exhaust system the end of the muffler with a shop towel. Hot exhaust system 8.

  • Page 129: Idle Speed Adjustment

    EBU15980 Idle speed adjustment NOTE: A diagnostic tachometer must be used for this procedure. 1. Start the engine and warm it up for a few minutes at approximately 1,000 to 2,000 r/min. Occasionally rev the engine to 4,000 to 5,000 r/min. The engine is warm when it 1.

  • Page 130: Valve Clearance Adjustment

    To prevent this, the valve clearance must the throttle lever free play. be adjusted regularly. This adjustment however, should be left to a professional Yamaha service 1. Loosen the locknut. technician. 2. Turn the adjusting bolt until the throttle lever free play is 2–4 mm (0.08–0.16 in).

  • Page 131: Front And Rear Brake Pad Inspection

    If a brake pad is worn to the point that the wear indicator grooves are almost in contact with the disc plate, ask a Yamaha dealer to replace the brake pads as a set. 1. Wear indicator groove Front 1.

  • Page 132: Brake Fluid Level Inspection

    EBU15820 Rear Brake fluid level inspection Rear Insufficient brake fluid may let air enter the brake system, possibly causing the brakes to become ineffective. Before riding, check that the brake fluid is above the minimum level mark and replenish if neces- sary.
  • Page 133 NOTE: To access the rear brake fluid reservoir cap, remove the seat (see page 4-13), remove the cowling bolt and quick fastener, and then pull the cowling slightly outward as shown. 1. Cowling 2. Reservoir tank cap Observe these precautions: 8 When checking the brake fluid level, make sure the top of the brake fluid reservoir is level.

  • Page 134: Brake Fluid Replacement

    Yamaha dealer check the brake system. 8 Brake fluid may deteriorate painted surfaces or plastic parts. Always clean up spilled fluid immediately. 8 Have a Yamaha dealer check the cause if the brake fluid level goes down. EBU11860 Brake fluid replacement Complete fluid replacement should be done only a.
  • Page 135 8 Make sure the brakes do not drag. 8 Make sure the brakes are not spongy. All air must be bled from the brake sys- tem. Replacement of brake components requires professional knowledge. These procedures should be performed by a Yamaha dealer. 8-31...

  • Page 136: Brake Pedal Height Adjustment

    The top of the brake pedal should be positioned POTENTIAL HAZARD 15.3 mm (0.6 in) below the top of the footrest. If Operating with improperly serviced or not, have a Yamaha dealer adjust it. adjusted brakes. WHAT CAN HAPPEN You could lose braking ability, which could lead to an accident.

  • Page 137: Parking Brake Adjustment

    EBU16050 Parking brake adjustment 1. Release the parking brake by moving the Parking brake adjustment may be required if the parking brake lever to the right. parking brake does not hold properly. The cable 2. Loosen the locknut on the brake cable. length “A”...
  • Page 138 WARNING NOTE: If the cable cannot be adjusted to specification, POTENTIAL HAZARD consult a Yamaha dealer. Operating with improperly adjusted brakes. 4. Tighten the locknut on the brake cable. WHAT CAN HAPPEN The brakes could malfunction, causing reduced braking performance. This could increase the chance of a collision or acci- dent.

  • Page 139: Adjusting The Rear Brake Light Switch

    EBU08330 Adjusting the rear brake light switch The rear brake light switch, which is activated by the brake pedal and brake lever, is properly adjusted when the brake light comes on just before braking takes effect. If necessary, adjust the brake light switch as follows. Turn the adjusting nut while holding the rear brake light switch in place.

  • Page 140: Clutch Lever Free Play Adjustment

    EBU07410 Clutch lever free play adjustment The clutch lever free play should be adjusted to 5–10 mm (0.20–0.39 in). 1. Loosen the locknut at the clutch lever. 2. Turn the adjusting bolt at the clutch lever in direction a to increase the free play or in direction b to decrease the free play.
  • Page 141 6. Loosen the locknut at the crankcase side. 7. Turn the adjusting nut at the crankcase in direction a to increase the free play or in direction b to decrease the free play. 8. Tighten the locknut at the crankcase and the clutch lever.

  • Page 142: Drive Chain Slack Check

    EBU11440 Drive chain slack check NOTE: Move the ATV back and forth and find the tight- est position of the drive chain. Check and/or adjust the chain slack while it is in this tightest position. To check the drive chain slack, all tires must be touching the ground and there should be no weight on it.

  • Page 143: Adjusting The Drive Chain Slack

    EBU15752 Adjusting the drive chain slack 3. Shift the transmission into the neutral posi- 1. Loosen the rear axle pinch bolts. tion. 2. Insert a rod of a diameter of 8 mm and a 4. To loosen the drive chain, push the ATV length of 10 cm into one of the holes in the forward, and to tighten the drive chain, drive chain tensioner as shown.

  • Page 144: Lubricating The Drive Chain

    EBU08050 5. Tighten the rear axle pinch bolts in the Lubricating the drive chain order shown to the specified torque. The drive chain must be cleaned and lubricated at the intervals specified in the periodic mainte- nance and lubrication chart, otherwise it will quickly wear out, especially when riding in dusty or wet areas.
  • Page 145 1. Clean the drive chain with kerosene and a small soft brush. To prevent damaging the O-rings, do not clean the drive chain with steam cleaners, high-pressure washers or inappropriate sol- vents. 2. Wipe the drive chain dry. 3. Thoroughly lubricate the drive chain with a special O-ring chain lubricant.

  • Page 146: Cable Inspection And Lubrication

    WARNING Yamaha dealer to replace them. POTENTIAL HAZARD Recommended lubricant: Damaged control cables. Yamaha chain and cable lube or SAE WHAT CAN HAPPEN 10W30 motor oil Corrosion can result when the outer cov- ering of control cables becomes damaged.

  • Page 147: Front Upper And Lower Arm Pivot Lubrication

    EBU10180 Right side Front upper and lower arm pivot lubrication Lubricate the upper and lower arm pivots. Recommended lubricant: Lithium-soap-based grease Left side 1. Upper grease nipple 2. Lower grease nipple (×2) 1. Upper grease nipple 2. Lower grease nipple (×2) 8-43...

  • Page 148: Rear Arm Pivot Lubrication

    EBU09870 Rear arm pivot lubrication Lubricate the rear arm pivots. Recommended lubricant: Lithium-soap-based grease 1. Grease nipple 1. Grease nipple 1. Grease nipple 8-44...
  • Page 149 8-45...

  • Page 150: Wheel Removal

    EBU11120 Rear Wheel removal 1. Loosen the wheel nuts. 2. Elevate the ATV and place a suitable stand under the frame. 3. Remove the nuts from the wheel. 4. Remove the wheel. Front 1. Nut (×4) 1. Nut (×4) 8-46...

  • Page 151: Wheel Installation

    EBU07390 Wheel installation Rear When installing the wheel, reverse the removal procedure. NOTE: The arrow mark on the tire must point toward the rotating direction of the wheel. Front 1. Arrow mark Tighten the wheel nuts to the specified torque. Wheel nut torque: Front: 45 Nm (4.5 m0kgf, 33 ft0lbf)

  • Page 152: Battery

    Keep out of reach of children. tery. If the battery seems to have discharged, Antidote: consult a Yamaha dealer. EXTERNAL: Flush with water. INTERNAL: Drink large quantities of water Do not try to remove the sealing caps of the or milk.

  • Page 153: Battery Maintenance

    EBU03850 Battery maintenance 1. When the machine is not used for a month or longer, remove the battery and store it in a cool, dark place. Completely recharge the battery before reinstallation. A special battery charger (constant voltage/ampere or constant voltage) is required for recharging a sealed-type bat- 1.

  • Page 154: Fuse Replacement

    2. If a fuse is blown, turn off the main switch and install a new fuse of the specified amperage. Then turn on the switches. If the fuse immediately blows again, consult a Yamaha dealer. Specified fuses: 1. Main fuse 2. Main spare fuse...
  • Page 155 q WARNING POTENTIAL HAZARD Using an improper fuse. WHAT CAN HAPPEN An improper fuse can cause damage to the electrical system which could lead to a fire. HOW TO AVOID THE HAZARD Always use a fuse of the specified rating. Never use a material in place of the proper fuse.

  • Page 156: Replacing A Headlight Bulb

    EBU14040 Replacing a headlight bulb 2. Disconnect the headlight coupler. If a headlight bulb burns out, replace it as fol- 3. Remove the headlight bulb holder cover. lows. 1. Remove the headlight assembly by remov- ing the bolts. 1. Headlight bulb holder cover 2.
  • Page 157 5. Remove the defective bulb and replace it 4. Push the headlight bulb holder in and turn with a new bulb. it counterclockwise to remove. q WARNING POTENTIAL HAZARD A headlight bulb is hot when it is on and immediately after it is turned off. WHAT CAN HAPPEN You can be burned, or a fire could start if the bulb touches something flammable.
  • Page 158 6. Push the headlight bulb holder in and turn it clockwise to install. 7. Install the headlight bulb holder cover. 8. Connect the headlight coupler. 9. Install the headlight assembly by installing the bolts. 10. Adjust the headlight beam if necessary. 1.

  • Page 159: Headlight Beam Adjustment

    Headlight beam adjustment Tail/brake light This model is equipped with an LED type of tail/brake light. It is advisable to have a Yamaha dealer make If the tail/brake light does not come on, have a this adjustment. Yamaha dealer check it.

  • Page 160: Troubleshooting

    Fuel can ignite or explode, causing severe procedure for making checks. If your machine injury or property damage. requires any repair, take it to a Yamaha dealer. HOW TO AVOID THE HAZARD The skilled technicians at a Yamaha dealership Do not smoke when checking the fuel sys- have the tools, experience, and know-how to tem.

  • Page 161: Troubleshooting Charts

    2. Compression Use the electric There is compresson Compression normal starter to see if there is compression No compression Ask a Yamaha dealer to inspect Wipe clean with 3. Ignition dry cloth Remove the spark plug Spark good Ignition system normal and check the electrodes.
  • Page 162 Wait until the reservoir tank and/or radiator. engine has cooled. Restart the engine. If the engine overheats again, ask a Yamaha dealer to inspect and/or Level is OK. repair the cooling system. NOTE: If it is difficult to get the recommended coolant, tap water can be temporarily used, provided that it is changed to the recommended coolant as soon as possible.

  • Page 163: Cleaning And Storage

    EBU04170 CLEANING AND STORAGE Excessive water pressure may cause water A. CLEANING seepage and deterioration of wheel bearings, Frequent, thorough cleaning of your machine brakes, transmission seals and electrical will not only enhance its appearance but will devices. Many expensive repair bills have improve its general performance and extend the resulted from improper high pressure deter- useful life of many components.
  • Page 164 q WARNING 7. Clean the seat with a vinyl upholstery cleaner to keep the cover pliable and POTENTIAL HAZARD glossy. Operation with wet brakes after washing. 8. Automotive type wax may be applied to all WHAT CAN HAPPEN painted and chrome plated surfaces. Avoid combination cleaner-waxes.

  • Page 165: Storage

    Do not apply oil to any rubber NOTE: parts or the seat cover. Use of fuel stabilizer and conditioner eliminates the need to drain the fuel system. Consult a Yamaha dealer if the fuel system needs to be drained instead.
  • Page 166 8. Remove the battery and charge it. Store it in a dry place and recharge it once a month. Do not store the battery in an excessively warm or cold place (less than 0° C (30° F) or more than 30° C (90° F)). NOTE: Make any necessary repairs before storing the machine.

  • Page 167: Specifications

    EBU04280 SPECIFICATIONS Model YFM700R Dimension: Overall length 1,845 mm ( 72.6 in) Overall width 1,170 mm ( 46.1 in) Overall height 1,130 mm ( 44.5 in) Seat height 815 mm ( 32.1 in) Wheel base 1,280 mm ( 50.4 in) Ground clearance 240 mm ( 9.45 in)
  • Page 168 Model YFM700R Engine oil: 0° 10° 30° 50° 70° 90° 110° 130°F Type YAMALUBE 4 (20W40) or SAE20W40 YAMALUBE 4 (10W30) or SAE10W30 SAE 5W30 –20° –10° 0° 10° 20° 30° 40° 50°C Recommended engine oil classification: API Service SE, SF, SG type or higher In order to prevent clutch slippage (since the engine oil also lubricates the clutch), do not mix any chemical additives.
  • Page 169 Model YFM700R Cooling system: Radiator capacity (Including all routes) 1.61 L (1.42 Imp qt, 1.70 US qt) Coolant reservoir capacity (Up to the maximum level mark) 0.25 L (0.22 Imp qt, 0.26 US qt) Air filter: Wet type element Fuel: Type UNLEADED GASOLINE ONLY Tank capacity...
  • Page 170 Model YFM700R Transmission: Primary reduction system Spur gear Primary reduction ratio 77/34 (2.265) Secondary reduction system Chain drive Secondary reduction ratio 38/14 (2.714) Transmission type Constant mesh 5-speed forward, 1-speed reverse Operation Left foot operation Gear ratio 38/13 (2.923) 28/14 (2.000) 25/17 (1.471) 25/22 (1.136) 22/24 (0.917)
  • Page 171 Model YFM700R Brake: Front brake type Dual disc brake operation Right hand operation Rear brake type Single disc brake operation Right foot operation Suspension: Front suspension Double wishbone Rear suspension Swingarm (link suspension) Shock absorber: Front shock absorber Coil spring/Oil damper Rear shock absorber Coil spring/Gas-Oil damper Wheel travel:...
  • Page 172 Model YFM700R Bulb voltage, wattage × quantity: 12V, 30W/30W × 2 Headlight Tail/brake light Indicator/warning light Neutral Fuel level Reverse Coolant temperature Engine trouble Fuses: Main 20.0 A Headlight 15.0 A Signaling system 10.0 A Ignition 10.0 A Fuel injection system 10.0 A 10-6...

  • Page 173: Noise Regulation

    EBU13640 NOISE REGULATION TAMPERING WITH NOISE CONTROL SYSTEM PROHIBITED: Federal law prohibits the following acts or the causing thereof: (1) The removal or rendering inopera- tive by any person other than for purposes of maintenance, repair, or replacement of any device or element of design incorporated into any new vehicle for the purpose of noise control prior to its sale or delivery to the ultimate purchaser or while it is in use or (2) the use of the vehicle after such device or element of design has been removed or rendered inoperative by any person.

  • Page 174: Maintenance Record

    EBU15740 MAINTENANCE RECORD Copies of work orders and/or receipts for parts you purchase and install will be required to document maintenance done in accordance with the warranty. The chart below is printed only as a reminder to you that the maintenance work is required. It is not acceptable proof of maintenance work. MAINTENACE DATE OF SERVICING DEALER...

  • Page 175: Atv Limited Warranty

    EBU26310 YAMAHA MOTOR CORPORATION, U.S.A. ATV LIMITED WARRANTY 13-1...
  • Page 176 13-2...
  • Page 177 EBU13700 14-1...
  • Page 178 14-2...
  • Page 179 EEBU04360 Indicates a potential hazard that could result in serious injury or death.
  • Page 180 EBU13710...
  • Page 181 9 with a passenger - passengers affect balance and steering and increase risk of losing control. LOCATE AND READ OWNER’S MANUAL. FOLLOW ALL INSTRUCTIONS AND WARNINGS. (For replacement manual, call 1-800-532-1558) YAMAHA MOTOR CO., LTD. PRINTED IN JAPAN PRINTED ON RECYCLED PAPER 2005.6-6.8x1 !
  • Page 182 8 TAKE THE FREE HANDS-ON TRAINING COURSE OFFERED BY YAMAHA – ASK YOUR DEALER FOR DETAILS OR CALL 1-800-887-2887 If you have any questions about these points, or if you purchased your ATV from an authorized Yamaha dealership and were not informed of the age recommendation for your ATV by the dealership, please fill out the information below and mail this card to yamaha today.
  • Page 183 NO POSTAGE NECESSARY IF MAILED IN THE UNITED STATES FIRST CLASS PERMIT NO. 4 CYPRESS, CA POSTAGE WILL BE PAID BY ADDRESSEE YAMAHA MOTOR CORPORATION U.S.A. P.O. BOX 6555 CYPRESS, CALIFORNIA 90630-9989 ATTN: SALES ADMINISTRATION...

This manual is also suitable for:

Yfm700rvRaptor 700r

Table of Contents

Save PDF