hit counter script
Yamaha KODIAK 700 YFM70KDXH Owner's Manual
  1. Manuals
  2. Brands
  3. Yamaha Manuals
  4. Offroad Vehicle
  5. KODIAK 700 YFM70KDXH
  6. Owner's manual

Yamaha KODIAK 700 YFM70KDXH Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

READ THIS MANUAL CAREFULLY!
It contains important safety information.
LIRE ATTENTIVEMENT CE MANUEL!
Il comprend d'importantes informations de sécurité.
¡LEA ESTE MANUAL ATENTAMENTE!
Contiene indicaciones importantes acerca de la seguridad.
MANUEL DU PROPRIÉTAIRE
MANUAL DEL PROPIETARIO
YFM70KPXH/YFM70KPHH
YFM70KPSH/YFM70KPAH
OWNER'S MANUAL
YFM70KDXH
B16-F8199-61

Advertisement

Table of Contents
loading

Related Manuals for Yamaha KODIAK 700 YFM70KDXH

Summary of Contents for Yamaha KODIAK 700 YFM70KDXH

  • Page 1 READ THIS MANUAL CAREFULLY! It contains important safety information. LIRE ATTENTIVEMENT CE MANUEL! Il comprend d’importantes informations de sécurité. ¡LEA ESTE MANUAL ATENTAMENTE! Contiene indicaciones importantes acerca de la seguridad. OWNER’S MANUAL MANUEL DU PROPRIÉTAIRE MANUAL DEL PROPIETARIO YFM70KDXH YFM70KPXH/YFM70KPHH YFM70KPSH/YFM70KPAH B16-F8199-61...
  • Page 2 Original instructions Notice originale Manual original PRINTED IN USA 2016.06-0.3×1 CR (E,F,S)
  • Page 3 READ THIS MANUAL CAREFULLY! It contains important safety information. OWNER’S MANUAL YFM70KDXH YFM70KPXH/YFM70KPHH YFM70KPSH/YFM70KPAH WARNING This ATV should not be ridden by anyone under 16 years of age. B16-F8199-61-E0...

  • Page 4: Ec Declaration Of Conformity

    Read this manual carefully before operating this vehicle. This manual should stay with this ve- hicle if it is sold. EC Declaration of Conformity conforming to Directive 2006/42/EC We, YAMAHA MOTOR CO., LTD. 2500 Shingai, Iwata, Japan, declare in sole responsibility, that the product YFM700FWB (YFM70KDX) (5Y4AM94W0G0501641–)
  • Page 5 EC Declaration of Conformity conforming to Directive 2006/42/EC We, YAMAHA MOTOR CO., LTD. 2500 Shingai, Iwata, Japan, declare in sole responsibility, that the product YFM700FWBD (YFM70KPX) (5Y4AMA2W0G0501321–) (YFM70KPH) (5Y4AMB5W0G0500260–) (YFM70KPS) (5Y4AMB1W0G0501040–) (Make, model) to which this declaration applies, conforms to the essential health and...
  • Page 6 YFM70KPSH / YFM70KPAH. This ATV represents the result of many years of Yamaha experience in the production of fine sporting, touring, and pacesetting racing machines. With the purchase of this Yamaha, you can now appreciate the high degree of craftsmanship and reliability that have made Yamaha a leader in these fields.
  • Page 7 EBU17331 IMPORTANT MANUAL INFORMATION EBU17343 FAILURE TO FOLLOW THE WARNINGS CONTAINED IN THIS MANUAL CAN RESULT IN SERIOUS IN- JURY OR DEATH. Particularly important information is distinguished in this manual by the following notations: This is the safety alert symbol. It is used to alert you to potential per- sonal injury hazards.
  • Page 8 Please check your local riding laws and regulations before operating this ATV. EBU17411 YFM70KDXH / YFM70KPXH / YFM70KPHH / YFM70KPSH / YFM70KPAH OWNER’S MANUAL ©2016 by Yamaha Motor Co., Ltd. 1st edition, March 2016 All rights reserved. Any reprinting or unauthorized use without the written permission of Yamaha Motor Co., Ltd.

  • Page 9: Table Of Contents

    EBU17421 TABLE OF CONTENTS LOCATION OF THE WARNING AND Brake pedal and rear brake lever ..... 4-18 SPECIFICATION LABELS ......1-1 Drive select lever ........4-19 Fuel tank cap ..........4-19 SAFETY INFORMATION ........ 2-1 Fuel ............4-19 Seat ............4-21 DESCRIPTION..........
  • Page 10 Throttle lever ..........5-4 WHAT TO DO IF........7-22 Tires ............5-4 WHAT TO DO........... 7-22 Chassis fasteners........5-7 Instruments, lights and switches ....5-7 PERIODIC MAINTENANCE AND ADJUSTMENT ..........8-1 OPERATION ...........6-1 Owner’s manual and tool kit....... 8-2 Starting the engine ........6-1 Periodic maintenance chart for the Operating the drive select lever and emission control system......
  • Page 11 Adjusting the rear brake lever and brake SPECIFICATIONS........10-1 pedal free play ........8-45 Axle boots ..........8-48 CONSUMER INFORMATION....... 11-1 Brake light switches ........8-48 Identification numbers ......11-1 Checking and lubricating the cables..8-49 Checking and lubricating the front and INDEX ............

  • Page 12: Location Of The Warning And Specification Labels

    Read and understand all of the labels on your ATV. These labels contain important information for safe and proper operation. Never remove any labels from your ATV. If a label becomes difficult to read or comes off, request a re- placement label from your Yamaha dealer.
  • Page 13 For Europe...
  • Page 14 < 50 kg ( 110 lbs) B16-F817R-00 < 90 kg YAMAHA 1P0-F816P-20 ( 198 lbs) B16-F817R-10 < 5880 N < 600 kgf < 1322 lbf < 147 N < 15 kgf < 33 lbf 37S-F817S-00 35.0 kPa 30.0 kPa 0.35 kgf/cm²...
  • Page 15 6 YFM70KDXH YFM700FWB 2016 36.0 kW YAMAHA MOTOR CO., LTD. 300 kg 2500 SHINGAI, IWATA, JAPAN B16-F155A-10 6 YFM70KPXH/YFM70KPHH YFM700FWBD 2016 36.0 kW YAMAHA MOTOR CO., LTD. 307 kg 2500 SHINGAI, IWATA, JAPAN 2SM-F155A-10 6 YFM70KPSH YFM700FWBD 2016 36.0 kW YAMAHA MOTOR CO., LTD.
  • Page 16 < 4 kg ( 9 lb ) B16-F816N-01 YAMAHA 1P0-F816R-00...
  • Page 17 Familiarize yourself with the following pictograms and read the explanatory text, then make sure to check the pictograms that apply to your model. Read the Owner’s manual. NEVER use on paved roads. ALWAYS use an approved helmet and NEVER carry passengers. protective gear.
  • Page 18 This unit contains high-pressure nitrogen Turning 4WD-LOCK gas. (“DIFF.LOCK”) takes more effort. Operate at a slow speed and allow extra Mishandling can cause an explosion. Do not incinerate, puncture or open. time and distance for maneuvers to avoid loss of control. This pictogram shows the loading limits and/or maximum load capacity for this ATV.
  • Page 19 Year of construction Model Name ****** **** *** kW YAMAHA MOTOR CO., LTD. Max. Power *** kg 2500 SHINGAI, IWATA, JAPAN Mass In Running Order...
  • Page 20 For Oceania...
  • Page 21 WARNING LOAD LIMIT NEVER ride as a passenger. 50 kg (110 lbs) Passengers can cause YAMAHA B16-F4877-A0 a loss of control, resulting in SEVERE INJURY or DEATH. YAMAHA MAXIMUM LOADING LIMIT LOAD LIMIT PULLING LOAD: 5880 N (600 kgf) 1322 lbf...
  • Page 22 Maximum Vehicle Load : 240 kg, (530 lbs) Includes weight of operator, cargo and accessories UNDER (and if applicable, trailer tongue weight). YAMAHA B16-F816M-00 Operating this ATV if you are under the age of 16 increases your chance of severe injury or death.
  • Page 23 • use proper riding techniques to avoid vehicle overturns on hills and rough terrain and in turns. • avoid paved surfaces-pavement may seriously affect handling and control. LOCATE AND READ OWNER’S MANUAL. FOLLOW ALL INSTRUCTIONS AND WARNINGS. YAMAHA 4XE-F1568-10 1-12...

  • Page 24: Safety Information

    EBU17432 SAFETY INFORMATION SAFETY INFORMATION  Never allow a child under age 16 to operate an EBU27254 ATV without adult supervision, and never allow AN ATV IS NOT A TOY AND CAN BE HAZARD- continued use of an ATV by a child if he or she OUS TO OPERATE.
  • Page 25  Never operate at speeds too fast for your skills  Never operate the ATV on hills too steep for the or the riding conditions. Always go at a speed ATV or for your abilities. Practice on smaller hills that is proper for the terrain, visibility, operating before attempting larger hills.
  • Page 26  Never operate an ATV in fast flowing water or in technique described in this manual on level ground. Avoid crossing the side of a steep hill if water deeper than that recommended in this possible. manual. Remember that wet brakes may have ...
  • Page 27  Never maintain an ATV without proper knowl- vehicle. If the vehicle is in safe operating con- edge. Contact an authorized ATV dealer to in- dition and you can safely operate it, restart it form you on basic ATV maintenance. Certain and ride gently back to camp or other known maintenance can only be carried out by certified location where you can receive medical at-...
  • Page 28 While you may find aftermarket products similar in therefore, such accessories are not recom- design and quality to genuine Yamaha accesso- mended. ries, recognize that some aftermarket accessories  Use caution when adding electrical accesso- or modifications are not suitable because of po- ries.
  • Page 29  Do not run engine outdoors where engine EWB00073 WARNING exhaust can be drawn into a building through openings such as windows and doors. Avoid Carbon Monoxide Poisoning All engine exhaust contains carbon monoxide, a deadly gas. Breathing carbon monoxide can cause headaches, dizziness, drowsiness, nau- sea, confusion, and eventually death.

  • Page 30: Description

    EBU17681 DESCRIPTION EBU17691 EBU17701 Left view Right view 1. Radiator cap 1. Rear shock absorber assembly spring preload adjusting ring (YFM70KPXH / YFM70KPHH / YFM70KPSH / 2. Battery YFM70KPAH) 3. Fuses 2. Fuel tank cap 4. Air filter case 3. Owner’s tool kit 5.

  • Page 31: Controls And Instruments

    YFM70KPXH / YFM70KPHH / YFM70KPSH / EBU17714 Controls and instruments YFM70KPAH 7 8 9 10 11 12 YFM70KDXH 2 3 4 5 8 9 10 11 1. Drive select lever 2. Rear brake lever 1. Drive select lever 3. Handlebar switches 2.
  • Page 32 The ATV you have purchased may differ slightly from the figures shown in this manual.

  • Page 33: Instrument And Control Functions

    EBU17738 INSTRUMENT AND CONTROL FUNCTIONS EBU29912 Main switch The positions of the main switch are as follows: “ ” (on) All electrical systems are supplied with power. The headlights and taillight come on when the light switch is on, and the engine can be started. The key cannot be removed.

  • Page 34: Indicator Lights And Warning Lights

    YFM70KPXH / YFM70KPHH / YFM70KPSH / EBU26697 Indicator lights and warning lights YFM70KPAH YFM70KDXH 1 2 3 4 5 6 1. On-Command differential gear lock indicator light “DIFF. LOCK” (YFM70KPSH) 1. Fuel level warning light “ ” 2. Low-range indicator light “L” 2.
  • Page 35 “ ” (on), or if the warning EBU17861 Neutral indicator light “ ” light remains on, have a Yamaha dealer check the This indicator light comes on when the transmis- electrical circuit. sion is in the neutral position.
  • Page 36 When this occurs, the display will indicate and turning the key to “ ” (on). The warning light an error code (see page 4-9). Have a Yamaha should come on for a few seconds, and then go dealer check the self-diagnosis system.
  • Page 37 ATV starts moving. checked by turning the key to “ ” (on). If the warning light does not come on, have a Yamaha Four-wheel-drive indicator “ ” (YFM70KPXH / dealer check the electrical circuit. YFM70KPHH / YFM70KPSH / YFM70KPAH) This indicator comes on when the drive lever or ...

  • Page 38: Multi-Function Display (Yfm70Kpxh / Yfm70Kphh / Yfm70Kpsh / Yfm70Kpah)

    On-Command differential gear lock EBU30498 Multi-function display (YFM70KPXH / indicator “ ” and indicator light “DIFF. LOCK” YFM70KPHH / YFM70KPSH / (YFM70KPSH) This indicator and indicator light come on when YFM70KPAH) the On-Command differential gear lock switch is set to the “LOCK” position. When the On-Command differential gear lock switch is set to “LOCK”...
  • Page 39  two tripmeters Push the “SELECT” button to switch between the  clock odometer “ODO” and the tripmeters “TRIP A” and  hour meter “TRIP B” in the following order: ODO → TRIP A → TRIP B → ODO  fuel gauge ...
  • Page 40 The fuel gauge is equipped with a self-diagnosis system. If the fuel gauge electrical circuit is not working correctly, all display segments and the fuel level warning indicator will flash repeatedly. If this occurs, have a Yamaha dealer check the ve- hicle.

  • Page 41: Handlebar Switches

    If the display indicates an error code, note the code number and have a Yamaha dealer check 1. Light switch “ /OFF”...
  • Page 42 YFM70KPSH EBU18102 Start switch “ ” Push this switch to crank the engine with the start- er. See the starting instructions on page 6-1 prior to starting the engine. EBU34121 Light switch “ /OFF” Set this switch to “ ” to turn on the left and right headlights (low beams) and the taillight.
  • Page 43 Top speed is normally limited when operating in indicate a malfunction in the electrical system. In differential gear lock. If conditions require more this case, take the ATV to a Yamaha dealer at the engine power when riding forward, push and hold first opportunity.
  • Page 44  “4WD” (four-wheel drive): Power is supplied to es with the riding speed. You may lose control and have an accident if you cannot make a the rear and front wheels. sharp enough turn for the speed you are trav- To change from two-wheel drive to four-wheel eling.
  • Page 45 control and have an accident if you cannot EBU30463 On-Command differential gear lock switch make a sharp enough turn for the speed you “4WD”/“LOCK” (YFM70KPSH) are traveling. EWB00132 WARNING This ATV is equipped with a switch allowing you to Always stop the ATV before changing from lock the differential gear when in four-wheel drive.
  • Page 46 1. On-Command four-wheel-drive switch “2WD”/“4WD” 1. Differential gear lock lever 2. On-Command differential gear lock switch 2. On-Command four-wheel-drive switch “2WD”/“4WD” “4WD”/“LOCK” Stop the ATV, move the differential gear lock lever To lock the differential gear in four-wheel drive, to position (a), and then push the differential gear make sure the On-Command four-wheel-drive lock switch in to the “LOCK”...

  • Page 47: Drive Lever "2Wd"/"4Wd" (Yfm70Kdxh / Yfm70Kpxh / Yfm70Kphh / Yfm70Kpah)

     Riding before the differential gear is properly en- gaged or disengaged (e.g., when the indicator and indicator light are flashing) will cause the vehicle speed to be limited until the differential gear is completely engaged or disengaged.  When the ATV is in four-wheel-drive differential LOCK gear lock, the maximum traveling speed is limit- ed to 35 km/h (22 mi/h).

  • Page 48: Throttle Lever

    handle differently. This could distract the oper- ator and increase the risk of losing control and of causing an accident. This vehicle is equipped with a lever to change from two-wheel drive to four-wheel drive and vice versa. Select the appropriate drive according to the terrain and the conditions.

  • Page 49: Speed Limiter

    decrease the maximum engine power avail- able and the maximum speed of the ATV, turn the adjusting screw in direction (b). Do not turn the adjusting screw out more than 12 mm (0.47 in) or the throttle cable could be damaged.

  • Page 50: Front Brake Lever

    3. Tighten the locknut. EBU18392 Front brake lever The front brake lever is located on the right han- dlebar. To apply the front brake, pull the brake le- ver toward the handlebar grip. 1. Brake pedal 1. Front brake lever EBU18443 Brake pedal and rear brake lever The brake pedal is located on the right side of the...

  • Page 51: Drive Select Lever

    EBU18612 Drive select lever The drive select lever is used to shift your ATV into the low-range, high-range, neutral, reverse and park positions. See the “Operating the drive select lever and driving in reverse” section on page 6-2 for the drive select lever operation. 1.
  • Page 52 of sparks, open flames, or other sources of Recommended fuel: ignition such as the pilot lights of water heat- Regular unleaded gasoline only ers and clothes dryers. For Europe: Regular unleaded gasoline only 2. Do not overfill the fuel tank. When refueling, with a research octane number of 95 or be sure to insert the pump nozzle into the fuel higher...

  • Page 53: Seat

    Your Yamaha engine has been designed to use 1. Seat regular unleaded gasoline with a research octane number of 91 or higher (95 or higher for Europe).

  • Page 54: Storage Compartment

    1. Projection 1. Storage compartment lid 2. Seat holder EBU34151 Storage compartment ECB02320 NOTICE Do not store metal or sharply edged objects, like tools, in the storage compartment. If they must be stored, wrap them in appropriate cushion material to prevent damaging the stor- age compartment.

  • Page 55: Front Carrier

    When storing any documents in the storage com- partment, be sure to wrap them in a plastic bag so that they will not get wet. When washing the vehi- cle, be careful not to let any water enter the stor- age compartment.

  • Page 56: Adjusting The Front And Rear Shock Absorber Assemblies (Yfm70Kpxh / Yfm70Kphh / Yfm70Kpsh / Yfm70Kpah)

    2. Position indicator and loss of stability, which could lead to an ac- cident. A special wrench can be obtained at a Yamaha Adjust the spring preload as follows. dealer to make this adjustment. Turn the spring preload adjusting ring in direction...

  • Page 57: Trailer Hitch (Yfm70Kpxh / Yfm70Kphh / Yfm70Kpsh / Yfm70Kpah)

    YFM70KPHH / YFM70KPSH / YFM70KPAH) This ATV is equipped with a 5 cm (2 in) trailer hitch receiver. Trailer towing equipment can be obtained at a Yamaha dealer. (See page 6-6 for precaution in- formation.) 1. Special wrench Spring preload setting: Minimum (soft):...

  • Page 58: Auxiliary Dc Jack

    EBU19184 Maximum rated capacity for the auxiliary DC Auxiliary DC jack jack: The auxiliary DC jack is located at the front right DC 12 V, 10 A (120 W) side of the ATV. The auxiliary DC jack can be used for suitable work lights, radios, etc.

  • Page 59: Pre-Operation Checks

    Do not operate the vehicle if you find any problem. If a problem cannot be corrected by the procedures provided in this manual, have the vehicle inspected by a Yamaha dealer. Before using this vehicle, check the following points:...
  • Page 60 ITEM ROUTINE PAGE • Check operation. If soft or spongy, have Yamaha dealer bleed hy- draulic system. • Check brake pads for wear, and replace if necessary. Front brake 5-3, 8-42, 8-44, 8-45 • Check brake fluid level in reservoir, and add specified brake fluid to specified level if necessary.

  • Page 61: Fuel

     Check that there is no free play in the front EBU19591 Final gear oil brake lever. If there is free play, have a Yamaha Make sure that the final gear oil is at the specified dealer check the brake system.

  • Page 62: Throttle Lever

    If there is any leakage, the brake proper tire pressure may cause severe injury or system should be checked by a Yamaha dealer. death from loss of control or rollover. Tire pressure below the minimum specified could...
  • Page 63 Recommended tire pressure: Front 35.0 kPa (0.350 kgf/cm², 5.0 psi) Rear 30.0 kPa (0.300 kgf/cm², 4.4 psi) Minimum tire pressure: Front 32.0 kPa (0.320 kgf/cm², 4.6 psi) Rear 27.0 kPa (0.270 kgf/cm², 4.0 psi) Maximum tire seating pressure: 1. Low-pressure tire gauge Front 250 kPa (2.5 kgf/cm², 36 psi) Tire wear limit...
  • Page 64 YFM70KPHH, YFM70KPSH, loss of control, increasing your risk of an acci- YFM70KPXH) dent. Size: AT25 x 10-12 After extensive tests, only the tires listed below Type: have been approved for this model by Yamaha Tubeless Motor Manufacturing Corporation of America.

  • Page 65: Chassis Fasteners

    Aftermarket tires and rims The tires and rims that came with your ATV were designed to match the performance capabilities and to provide the best combination of handling, braking, and comfort. Other tires, rims, sizes, and combinations may not be appropriate. EBU19841 Chassis fasteners Make sure that all nuts, bolts and screws are...

  • Page 66: Operation

    The corresponding indicator light should ECB00151 NOTICE come on. If the indicator light does not come on, have a Yamaha dealer check the electrical See the “Engine break-in” section on page 6-4 circuit. prior to operating the engine for the first time.

  • Page 67: Operating The Drive Select Lever And Driving In Reverse

     The rear brake lever or brake pedal is applied EBU36230 Operating the drive select lever and with the drive select lever in any position. How- driving in reverse ever, it is recommended to shift into the neutral or park position before starting the engine. ECB03330 NOTICE 3.
  • Page 68 reverse, make sure there are no people or ob- stacles behind you. When it is safe to proceed, go slowly. 1. Bring the ATV to a complete stop. 2. Apply the brake pedal. 3. Shift from neutral to reverse or from reverse to park and vice versa by moving the drive se- lect lever along the shift guide.

  • Page 69: Engine Break-In

    For this reason, you should read should come on. If the indicator light does not the following material carefully. come on, have a Yamaha dealer check the elec- Since the engine is brand new, do not put an ex- trical circuit.

  • Page 70: Parking

    Genuine Yamaha Accessories, Do not park the ATV at all on hills that are so which are available only from a Yamaha dealer, steep you could not walk up them easily. have been designed, tested, and approved by Yamaha for use on your ATV.
  • Page 71  Accessories should be rigidly and securely and accessories or offer other modifications for Yamaha vehicles. Yamaha is not in a position to mounted. An accessory which can shift position test the products that these aftermarket compa- or come off while you are riding could affect nies produce.
  • Page 72 curely attached. Reduce speed when carrying MAXIMUM LOADING LIMIT cargo or pulling a trailer. Allow greater dis- ATV loading limit (total weight of rider, car- tance for braking. go, accessories, and tongue): 240.0 kg (530 lb) Cargo or a trailer can change the stability and han- Front carrier: dling of an ATV.
  • Page 73  Load cargo on the carriers as close to the center of the ATV as possible. Put cargo at the rear of the front carrier, at the front of the rear carrier, and center it.  Tie down cargo securely to the carriers. Make sure cargo in the trailer cannot move around.

  • Page 74: Riding Your Atv

    EBU21142 RIDING YOUR ATV...

  • Page 75: Getting To Know Your Atv

    RIDE WITH CARE AND GOOD JUDGMENT EBU34290 Get training if you are inexperienced. GETTING TO KNOW YOUR ATV EWB01382 This ATV is mainly for utility use, but may also be WARNING used for recreation. This section, Riding your ATV,  Do not operate this ATV or allow anyone else provides general ATV riding instructions for recre- to operate it without proper instruction.
  • Page 76 the time to learn the basic techniques well before This ATV is designed to carry the operator and attempting more difficult maneuvers. Become fa- cargo only – passengers prohibited. miliar with this ATV at slow speeds first, even if you The long seat is to allow the operator to shift posi- are an experienced operator.
  • Page 77 Apparel Always wear the following to reduce risk of injury in an accident:  Approved motorcycle helmet that fits properly  Eye protection (goggles, helmet face shield, or protective eyewear)  Over-the-ankle boots, gloves, long-sleeved shirt or jacket, and long pants An approved helmet and other personal protective equipment can reduce the severity of injuries in an accident.
  • Page 78 1. Protective clothing Pre-operation checks 2. Goggles Always inspect your ATV each time you use it to 3. Gloves make sure the ATV is in safe operating condition. 4. Boots 5. Helmet Perform the pre-operation checks listed on page 5-1. Always follow the inspection and mainte- Do not operate after or while consuming alco- nance procedures and schedules described in the hol or drugs.
  • Page 79  Do not exceed the maximum loading limits fully opening, even when the throttle lever is pushed to the maximum. Turning in the adjusting for the vehicle (see “MAXIMUM LOADING screw limits the maximum engine power available LIMIT” in this section or vehicle labeling). ...
  • Page 80 During operation MAXIMUM LOADING LIMIT Always keep your feet on the footboards during ATV loading limit (total weight of cargo, rid- operation; otherwise, they may contact the rear er, accessories, and tongue): wheels. WARNING! Removing even one hand or 240.0 kg (530 lb) foot can reduce your ability to control the ATV Front carrier: or could cause you to lose your balance and...
  • Page 81 ATV should during operation or after leaving the ATV, do not be genuine Yamaha or equivalent components let brush, grass and other materials collect under designed for use on this ATV and should be in- the vehicle, near the muffler or exhaust pipe, or stalled and used according to instructions.

  • Page 82: Be Careful Where You Ride

    To prevent burns, avoid touching the exhaust sys- BE CAREFUL WHERE YOU RIDE tem. Park the ATV in a place where pedestrians or This ATV is designed for use on unpaved surfaces children are not likely to touch it. only. WARNING! Paved surfaces may seriously affect handling and control of the ATV, and may cause the ATV to go out of control.
  • Page 83 know your country’s laws and regulations before ful when operating on unfamiliar terrain. Al- you ride on unpaved public streets or roads. Do ways be alert to changing terrain conditions not ride on any paved public street, road or motor- when operating the ATV.
  • Page 84 terrain could cause loss of traction or ATV con- trol, which could result in an accident, includ- ing an overturn. [EWB01542] Do not ride in areas posted “no trespassing”. Do not ride on private property without getting permission. When riding in an area where you might not easily be seen, such as desert terrain, mount a caution flag on the ATV.

  • Page 85: Turning Your Atv

    Select a large, flat, unpaved area to become famil- ECB00252 NOTICE iar with your ATV. Make sure that this area is free of obstacles and other riders. You should practice Do not shift from low-range to high-range or control of the throttle, brakes, shifting procedures, vice versa without coming to a complete stop.

  • Page 86: Climbing Uphill

    As you approach a curve, slow down and begin to may continue to go straight. If the ATV doesn’t turn the handlebars in the desired direction. As turn, come to a stop and then practice the proce- you do so, put your weight on the footboard to the dure again.
  • Page 87  Never operate the ATV on hills too steep for the ATV or for your abilities. The ATV can overturn more easily on extremely steep hills than on level surfaces or small hills.  Always check the terrain carefully before you start up any hill.
  • Page 88 Do not attempt to climb hills until you have mas- If you are climbing a hill and you find that you have tered basic maneuvers on flat ground. Always not properly judged your ability to make it to the check the terrain carefully before attempting any top, you should turn the ATV around while you still hill.

  • Page 89: Riding Downhill

     Always check the terrain carefully before you straight uphill. Turn the ATV around and remount, following the procedure described in the Owner’s start down any hill.  Never operate the ATV on hills too steep for Manual. WARNING! Stalling, rolling backwards or improperly dismounting while climbing a hill the ATV or for your abilities.

  • Page 90: Crossing A Slope

    Use caution while descending a hill with loose or slippery surfaces. Braking ability and traction may be adversely affected by these surfaces. Improper braking may also cause a loss of traction. When this ATV is in “4WD”, all wheels (front and rear) are interconnected by the drive train.

  • Page 91: Crossing Through Shallow Water

     Shift your weight to the uphill side of the ATV.  Never attempt to turn the ATV around on any hill until you have mastered the turning tech- nique as described in the Owner’s Manual on level ground. Be very careful when turning on any hill.
  • Page 92 The ATV can be used to cross slow moving, shal- braking ability. WARNING! Wet brakes may have low water of up to a maximum of 35 cm (14 in) in reduced stopping ability, which could cause depth. Before entering the water, choose your loss of control.

  • Page 93: Riding Over Rough Terrain

    1. Air filter case check hose 1. V-belt case drain plug RIDING OVER ROUGH TERRAIN EWB01652 WARNING Riding improperly over obstacles could cause loss of control or a collision. Before operating in a new area, check for obstacles. Never at- tempt to ride over large obstacles, such as lar- ge rocks or fallen trees.

  • Page 94: Sliding And Skidding

    accident. Be sure to keep your feet firmly mounted To reduce the tendency for the front wheels to on the footboards at all times. Avoid jumping the slide in loose or slippery conditions, positioning ATV as loss of control and damage to the ATV may your weight over the front wheels will sometimes result.

  • Page 95: What To Do If

    WHAT TO DO...  If your ATV doesn’t turn when you want it to: Bring the ATV to a stop and practice the turning maneuvers again. Be sure you are putting your weight on the footboard to the outside of the turn.
  • Page 96  If your ATV is traversing a sloping surface: Be sure to ride with your weight positioned to- wards the uphill side of the ATV to maintain proper balance. If the ATV starts to tip, steer down the hill (if there are no obstacles in your way) to regain balance.

  • Page 97: Periodic Maintenance And Adjustment

    The intervals given in the periodic maintenance vice or while using the vehicle. If you are not fa- charts should be considered as a general guide miliar with vehicle service, have a Yamaha under normal riding conditions. However, DE- dealer perform the service.

  • Page 98: Owner's Manual And Tool Kit

    Make sure to protect the owner’s If you do not have the tools or experience required manual by putting it in the plastic bag, then by for a particular job, have a Yamaha dealer perform placing the bag in the document pouch. it for you.

  • Page 99: Periodic Maintenance Chart For The Emission Control System

    However, keep in mind that if the ATV isn’t used for a long period of time, the month maintenance intervals should still be followed.  Items marked with an asterisk should be performed by a Yamaha dealer as they require special tools, data and technical skills.
  • Page 100 INITIAL EVERY month Whichev- CHECK OR MAINTENANCE ITEM er comes 1300 2500 2500 5000 km (mi) first (200) (800) (1600) (1600) (3200) hours • Check for leakage and replace gasket(s) if neces- sary. √ √ √ Exhaust system • Check for looseness and tighten all screw clamps and joints if necessary.

  • Page 101: General Maintenance And Lubrication Chart

    However, keep in mind that if the ATV isn’t used for a long period of time, the month maintenance intervals should still be followed.  Items marked with an asterisk should be performed by a Yamaha dealer as they require special tools, data and technical skills.
  • Page 102 INITIAL EVERY month Whichev- CHECK OR MAINTENANCE ITEM er comes 1300 2500 2500 5000 km (mi) first (200) (800) (1600) (1600) (3200) hours • Check for cracks or other damage, and replace if √ √ √ √ necessary. Brake hoses •...
  • Page 103 INITIAL EVERY month Whichev- CHECK OR MAINTENANCE ITEM er comes 1300 2500 2500 5000 km (mi) first (200) (800) (1600) (1600) (3200) hours √ √ √ Steering shaft • Lubricate with lithium-soap-based grease. • Check operation and repair or replace if dam- √...
  • Page 104 INITIAL EVERY month Whichev- CHECK OR MAINTENANCE ITEM er comes 1300 2500 2500 5000 km (mi) first (200) (800) (1600) (1600) (3200) hours Moving parts and √ √ √ √ • Lubricate. cables • Check operation. • Check throttle lever free play, and adjust if neces- √...

  • Page 105: Removing And Installing Panels

    EBU23091 Removing and installing panels The panels shown need to be removed to perform some of the maintenance jobs described in this chapter. Refer to this section each time a panel needs to be removed and installed. 1. Panel E 2.
  • Page 106 Panel B To remove the panel 1. Remove panel A. 2. Remove the front carrier by removing the bolts. 1. Panel A To install the panel Place the panel in the original position. 1. Front carrier 2. Carrier bolt (upper) 8-10...
  • Page 107 1. Carrier bolt (under the fenders) 1. Panel B 2. Carrier bolt (lower) 2. Quick fastener 3. Remove the quick fasteners, and then pull the To install the panel panel upward to remove it. 1. Place the panel in the original position, and then install the quick fasteners.
  • Page 108 Panel C To remove the panel 1. Remove the seat. (See page 4-21.) 2. Remove panel A. 3. Remove the hoses from panel C. 2. Install the front carrier by installing the bolts and tightening them to the specified torques. Tightening torques: Carrier bolt (upper): 34 N·m (3.4 kgf·m, 25 lb·ft)
  • Page 109 1. Bolt 1. Screw 2. Quick fastener To install the panel 5. Remove the screws under the storage com- 1. Place the panel in the original position. partment lid, and then pull the panel upward to remove it. To ease removal of panel C, shift the drive select lever into the reverse position.
  • Page 110 2. Install the screws, quick fasteners, bolts, and hoses. Make sure that the hoses are properly connected and routed, and are not pinched. 3. Install panel A. 4. Install the seat. Panels D and E To remove a panel 1. Panel D 1.
  • Page 111 To install a panel Panels F and G 1. Place the panel in the original position, and To remove a panel then install the bolt. 1. Remove the panel bolts, footboard bolt, and footboard nut. 1. Panel F 2. Footboard nut 3.
  • Page 112 1. Panel G 2. Footboard nut 3. Footboard bolt 4. Panel bolt 5. Projection 2. Pull the panel downward while pushing the projection. To install a panel 1. Place the panel in the original position. 2. Install the bolts and nut, and then tighten them to the specified torques.

  • Page 113: Checking The Spark Plug

    Tightening torques: Panel bolt: 4.0 N·m (0.40 kgf·m, 2.9 lb·ft) Footboard nut: 4.0 N·m (0.40 kgf·m, 2.9 lb·ft) EBU34190 Checking the spark plug The spark plug is an important engine component, which is easy to check. Since heat and deposits will cause any spark plug to slowly erode, the 1.

  • Page 114: To Check The Spark Plug

    Do not attempt to diagnose such problems yourself. In- stead, have a Yamaha dealer check the vehicle. 2. Check the spark plug for electrode erosion and excessive carbon or other deposits, and replace it if necessary.
  • Page 115 Tightening torque: Spark plug: 11 N·m (1.1 kgf·m, 8.0 lb·ft) If a torque wrench is not available when installing the spark plug, a good estimate of the correct torque is 1/4–1/2 turn past finger tight. However, the spark plug should be tightened to the speci- fied torque as soon as possible.

  • Page 116: Engine Oil And Oil Filter Cartridge

    EBU27469 Engine oil and oil filter cartridge The engine oil level should be checked before each ride. In addition, the oil must be changed and the oil filter cartridge replaced at the intervals specified in the periodic maintenance and lubrica- tion chart.
  • Page 117 5. Insert the dipstick completely into the oil filler 7. Insert the dipstick completely into the oil filler hole, and then remove it again to check the oil hole. level. 8. Install the access cover by turning it clock- wise. The engine oil should be between the minimum To change the engine oil (with or without oil fil- and maximum level marks.
  • Page 118 1. Oil filter cartridge 2. Gasket 2. Oil filter wrench Skip steps 6–10 if the oil filter cartridge is not be- An oil filter wrench is available at a nearby Yamaha ing replaced. dealer. 6. Remove panel F. (See page 8-9.) 8.
  • Page 119 1. O-ring 1. Torque wrench Tightening torque: Oil filter cartridge: Make sure that the O-ring is properly seated. 15 N·m (1.5 kgf·m, 11 lb·ft) 9. Install the new oil filter cartridge with an oil fil- 10. Install panel F. ter wrench, and then tighten it to the specified 11.

  • Page 120: Final Gear Oil

    The final gear case must be checked for oil leak- age before each ride. If any leakage is found, have ECB00301 a Yamaha dealer check and repair the ATV. In ad- NOTICE dition, the final gear oil level must be checked and ...
  • Page 121 2. Remove the final gear oil level check bolt and its gasket, and then check the oil level in the final gear case. The oil level should be at the brim of the check hole. 1. Final gear oil filler bolt 2.
  • Page 122 To change the final gear oil Tightening torque: 1. Place the ATV on a level surface. Final gear oil drain bolt: 2. Place an oil pan under the final gear case to 23 N·m (2.3 kgf·m, 17 lb·ft) collect the used oil. 3.

  • Page 123: Differential Gear Oil

    2. Gasket leakage before each ride. If any leakage is found, 3. Differential gear oil have a Yamaha dealer check and repair the ATV. 4. Correct oil level In addition, the differential gear oil level must be 3. If the oil is below the brim of the filler hole, add...

  • Page 124: Changing Differential Gear Oil

    5. Install the oil filler bolt and its gasket, and then 4. Install the drain bolt and its new gasket, and tighten the bolt to the specified torque. then tighten the bolt to the specified torque. Tightening torque: Tightening torque: Differential gear oil filler bolt: Differential gear oil drain bolt: 23 N·m (2.3 kgf·m, 17 lb·ft)

  • Page 125: Coolant

    Recommended differential gear oil: See page 10-1. The coolant level must be checked on a cold en- gine since the level varies with engine tempera- 6. Check the oil filler bolt gasket for damage, ture. and replace it if necessary. 7.
  • Page 126 0.25 L (0.26 US qt, 0.22 Imp.qt) a Yamaha dealer check the antifreeze con- tent of the coolant as soon as possible, otherwise the effectiveness of the coolant will be reduced.
  • Page 127 EBU34211 To change the coolant EWB01891 WARNING Wait for the engine and radiator to cool before removing the radiator cap. You could be burned by hot fluid and steam blown out under pressure. Always place a thick rag over the cap when opening.
  • Page 128 1. Radiator cap 1. Coolant drain bolt 2. Gasket 5. Place a container under the engine, and then remove the coolant drain bolt and its gasket. (Use a trough or a similar object as shown to prevent coolant from spilling on the engine guard.) 1.
  • Page 129 6. Place a container under the coolant reservoir Tightening torque: to collect the used coolant. Coolant drain bolt: 7. Remove the coolant reservoir cap. 8 N·m (0.8 kgf·m, 5.8 lb·ft) 8. Disconnect the coolant reservoir hose on the coolant reservoir side, and then drain the 11.
  • Page 130 Antifreeze/water mixture ratio: Recommended antifreeze: High-quality ethylene glycol antifreeze con- taining corrosion inhibitors for aluminum engines Coolant quantity: Radiator (including all routes): 1.76 L (1.86 US qt, 1.55 Imp.qt) Coolant reservoir (up to the maximum level mark): 1. Water pump air bleed bolt 0.25 L (0.26 US qt, 0.22 Imp.qt) 15.
  • Page 131 23. Start the engine, and then check for coolant leakage. If any leakage is found, have a Yamaha dealer check the cooling system. 1. Cylinder head air bleed bolt 24. Install the footboard by installing the bolts and nuts, and then tighten them to the speci- 18.
  • Page 132 1. Footboard nut Tightening torques: 2. Footboard bolt A Footboard nut: 3. Footboard bolt B 4.0 N·m (0.40 kgf·m, 2.9 lb·ft) Footboard bolt A: 4.0 N·m (0.40 kgf·m, 2.9 lb·ft) Tighten footboard bolts B in the order shown. Footboard bolt B: 8 N·m (0.8 kgf·m, 5.8 lb·ft) 25.

  • Page 133: Cleaning The Air Filter Element

    2. Remove the seat. (See page 4-21.) EBU34230 Cleaning the air filter element 3. Remove the air filter case cover by unhooking The air filter element should be cleaned at the in- the air filter case cover holders. tervals specified in the periodic maintenance and lubrication chart.
  • Page 134 1. Air filter element 1. Air filter element frame 2. Sponge material 5. Pull off the air filter element lock plate, and 3. Air filter element lock plate then remove the sponge material from the air 6. Wash the sponge material gently but thor- filter element frame.

  • Page 135: Cleaning The Spark Arrester

    40 hours. It should be cleaned and lubricated damaged. more often if the ATV is operated in extremely 9. Apply Yamaha foam air filter oil or other qual- dusty areas. Each time the air filter element main- ity foam air filter oil to the sponge material.
  • Page 136 1. Tailpipe bolt 1. Gasket 2. Spark arrester 2. Remove the tailpipe by pulling it out of the 3. Tailpipe muffler, and then remove the gasket. 4. Check the gasket for damage, and replace it 3. Tap the tailpipe lightly, and then use a wire if necessary.

  • Page 137: V-Belt Case Drain Plug

    If water drains from the V-belt case after removing if necessary, adjusted at the intervals specified in the plug, have a Yamaha dealer check the ATV as the periodic maintenance and lubrication chart. the water may affect other engine parts.

  • Page 138: Valve Clearance

    3. To increase the throttle lever free play, turn must be adjusted by a Yamaha dealer at the inter- the throttle lever free play adjusting bolt in di- vals specified in the periodic maintenance and lu- rection (a). To decrease the throttle lever free brication chart.
  • Page 139 (See page 8-64.) EBU30321 Rear brake friction plates The rear brake friction plates must be checked and, if necessary, replaced by a Yamaha dealer at the intervals specified in the periodic maintenance and lubrication chart. 8-43...

  • Page 140: Checking The Brake Fluid Level

     Insufficient brake fluid may allow air to enter EBU29843 Checking the brake fluid level the brake system, reducing braking perfor- Before riding, check that the brake fluid is above mance. the minimum level mark. Check the brake fluid lev- ...

  • Page 141: Changing The Brake Fluid

    If the brake fluid level goes down sud- denly, have a Yamaha dealer check the cause be- fore further riding. EBU24283 Changing the brake fluid Have a Yamaha dealer change the brake fluid at the intervals specified in the periodic maintenance and lubrication chart.
  • Page 142 2. To increase the brake lever free play, turn the brake lever free play adjusting bolt in direction (a). To decrease the brake lever free play, turn the adjusting bolt in direction (b). If the specified brake lever free play could be ob- tained as described above, skip steps 3–8.
  • Page 143 6. To increase the brake lever free play, turn the brake lever free play adjusting nut in direction (a). To decrease the brake lever free play, turn the adjusting nut in direction (b). 7. Tighten the brake cable adjuster locknut. 8.

  • Page 144: Axle Boots

    Check the axle boots for tears or damage. If any damage is found, have them replaced by a Yamaha dealer. 1. Rear axle boot (each side) EBU34270 Brake light switches...

  • Page 145: Checking And Lubricating The Cables

    The operation of the front and rear brake levers essary. If a cable is damaged or does not move should be checked before each ride, and the lever smoothly, have a Yamaha dealer check or replace pivots should be lubricated if necessary. Recommended lubricant:...

  • Page 146: Checking And Lubricating The Brake Pedal

    Rear brake lever Recommended lubricants: Front brake lever: Silicone grease Rear brake lever: Lithium-soap-based grease Front brake lever EBU28833 Checking and lubricating the brake pedal The operation of the brake pedal should be checked before each ride, and the pedal pivot should be lubricated if necessary.

  • Page 147: Checking The Wheel Hub Bearings

    If there is play Have a Yamaha dealer replace the stabilizer bush- in a wheel hub or if a wheel does not turn smooth- es if necessary. ly, have a Yamaha dealer check the wheel hub bearings. 8-51...

  • Page 148: Lubricating The Rear Knuckle Pivots

    The steering shaft must be lubricated by a and lubrication chart. Yamaha dealer at the intervals specified in the pe- riodic maintenance and lubrication chart. For parts equipped with a grease nipple, use a grease gun.

  • Page 149: Battery

    YFM70KDXH EBU2904D Battery The battery is located under panel A. (See page 8-9.) This model is equipped with a VRLA (Valve Regu- lated Lead Acid) battery. There is no need to check the electrolyte or to add distilled water. However, the battery lead connections need to be checked and, if necessary, tightened.
  • Page 150 KEEP OUT OF REACH OF CHILDREN. ECB00621 NOTICE Never attempt to remove the battery cell seals, as this would permanently damage the battery. To remove the battery 1. Remove panel A. (See page 8-9.) 2. Remove the front carrier by removing the bolts.
  • Page 151 Always keep the battery charged. Storing a To charge the battery discharged battery can cause permanent bat- Have a Yamaha dealer charge the battery as soon tery damage. as possible if it seems to have discharged. Keep in mind that the battery tends to discharge more...
  • Page 152 2. Connect the positive battery lead first, then Tightening torques: connect the negative battery lead by installing Carrier bolt (upper): their bolt. NOTICE: When installing the bat- 34 N·m (3.4 kgf·m, 25 lb·ft) tery, the main switch must be off, and the Carrier bolt (lower): positive lead must be connected before 34 N·m (3.4 kgf·m, 25 lb·ft)

  • Page 153: Replacing A Fuse

    EBU30521 Replacing a fuse 1. Headlight fuse 2. Signaling system fuse 1. Fuse box 3. Radiator fan motor fuse 2. Main fuse 4. Ignition fuse 3. EPS fuse (for EPS model) 5. Four-wheel-drive motor fuse (YFM70KPSH) 4. Fuel injection system spare fuse 6.
  • Page 154 ECB00641 Specified fuses: NOTICE Main fuse: To prevent accidental short-circuiting, turn off 40.0 A the main switch when checking or replacing a Headlight fuse: fuse. 10.0 A (YFM70KDXH) 15.0 A (YFM70KPAH, YFM70KPHH, 2. Remove the blown fuse, and then install a YFM70KPSH, YFM70KPXH) new fuse of the specified amperage.

  • Page 155: Replacing A Headlight Bulb

    4. If the fuse immediately blows again, have a Yamaha dealer check the electrical system. EBU34223 Replacing a headlight bulb If a headlight bulb burns out, replace it with the specified bulb as follows. Left and right headlight bulbs 1. Remove the cover at the rear of the headlight by pulling it off.
  • Page 156 4. Remove the burnt-out bulb. 7. Install the bulb cover and the cover at the rear 5. Place a new bulb into position. NOTICE: Do of the headlight. NOTICE: Make sure the not touch the glass part of the bulb. Oil bulb cover is securely fitted over the sock- from your fingers or other contamination et and seated properly.
  • Page 157 4. Remove the burnt-out bulb. 5. Place a new bulb into position. NOTICE: Do not touch the glass part of the bulb. Oil from your fingers or other contamination will adversely affect the transparency of the glass, luminosity of the bulb, and bulb life.

  • Page 158: Adjusting A Headlight Beam

    9. Adjust the handlebar-mounted light beam if necessary. EBU25553 Adjusting a headlight beam ECB00691 NOTICE It is advisable to have a Yamaha dealer make this adjustment. To raise a headlight beam, turn the headlight beam adjusting screw in direction (a). 8-62...

  • Page 159: Replacing The Tail/Brake Light Bulb

    YFM70KPXH / YFM70KPHH / YFM70KPSH / YFM70KPAH 1. Tail/brake light bulb holder 2. Remove the burnt-out bulb by pushing it in 1. Handlebar-mounted light beam adjusting screw and turning it counterclockwise. EBU25614 Replacing the tail/brake light bulb If the tail/brake light bulb burns out, replace it as follows.

  • Page 160: Removing A Wheel

    3. Insert a new bulb into the bulb holder, push it EBU36241 Installing a wheel in, and then turn it clockwise until it stops. 1. Install the wheel and the nuts. 4. Install the bulb holder (together with the bulb) by turning it clockwise.

  • Page 161: Troubleshooting

    The following troubleshooting charts represent quick and easy procedures for checking these vi- tal systems yourself. However, should your ATV require any repair, take it to a Yamaha dealer, whose skilled technicians have the necessary 1. Tapered nut tools, experience, and know-how to service the 2.

  • Page 162: Troubleshooting Charts

    Remove the spark plug and check the electrodes. The engine does not start. Have a Yamaha dealer check the ATV. Check the compression. 4. Compression The engine does not start. There is compression.
  • Page 163 Start the engine. If the engine overheats again, have a The coolant level Yamaha dealer check and repair the cooling system. is OK. If coolant is not available, tap water can be temporarily used instead, provided that it is changed to the recommended coolant as soon as possible.

  • Page 164: Cleaning And Storage

    EBU25861 CLEANING AND STORAGE and deterioration of wheel bearings, EBU25882 Cleaning brakes, transmission seals and electrical Frequent, thorough cleaning of your ATV will not devices. Many expensive repair bills have only enhance its appearance but will improve its resulted from improper high-pressure de- general performance and extend the useful life of tergent applications such as those avail- many components.

  • Page 165: Storage

    3. Perform the following steps to protect the cyl- EBU27262 Storage inder, piston rings, etc. from corrosion. a. Remove the spark plug cap and spark Short-term plug. Always store your ATV in a cool, dry place and, if b. Pour a teaspoonful of engine oil into the necessary, protect it against dust with a porous spark plug bore.
  • Page 166 6. Cover the muffler outlet with a plastic bag to prevent moisture from entering it. 7. Remove the battery and fully charge it. Store it in a cool, dry place and charge it once a month. Do not store the battery in an exces- sively cold or warm place [less than 0 °C (30 °F) or more than 30 °C (90 °F)].

  • Page 167: Specifications

    EBU25962 SPECIFICATIONS Dimensions: Vibration on seat (EN1032, ISO5008): Will not exceed 0.5 m/s² (YFM70KDXH_EUR/FRA/GBR, Overall length: YFM70KPHH, YFM70KPSH, YFM70KPXH) 2070 mm (81.5 in) Uncertainty of measurement: Overall width: 0.0 m/s² (YFM70KPHH, YFM70KPSH, YFM70KPXH) 1180 mm (46.5 in) 0.1 m/s² (YFM70KDXH_EUR/FRA/GBR) Overall height: Vibration on handle (EN1032, ISO5008): 1240 mm (48.8 in)
  • Page 168 Differential gear oil: YAMALUBE Type: Type: SAE 0W-30, 10W-30, 10W-40, 15W-40, 20W-40 or 20W- Yamaha Friction Modified Plus Shaft Drive Oil (Part No.: ACC-SHFTL-PL-32) or SAE 80 API GL-4 Hypoid gear oil Quantity: 130 ˚F 0.22 L (0.23 US qt, 0.19 Imp.qt)
  • Page 169 Spark plug gap: Size: 0.8–0.9 mm (0.031–0.035 in) AT25 x 8-12 Clutch: Manufacturer/model: CHENG SHIN/C828 (YFM70KDXH_AUS/NZL, Clutch type: YFM70KPAH) Wet, centrifugal automatic MAXXIS/MU19 (YFM70KDXH_EUR/FRA/GBR, Transmission: YFM70KPHH, YFM70KPSH, YFM70KPXH) Secondary reduction system: Rear tire: Shaft drive Type: Secondary reduction ratio: 43/21 × 24/18 × 33/9 (10.011) Tubeless Size: Transmission type:...
  • Page 170 Front wheel: Wheel travel: 193 mm (7.6 in) Wheel type: Rear suspension: Cast wheel (YFM70KPSH) Panel wheel (YFM70KDXH, YFM70KPAH, YFM70KPHH, Type: YFM70KPXH) Double wishbone Rim size: Spring/shock absorber type: 12 x 6.0AT Coil spring/oil damper Rear wheel: Wheel travel: 232 mm (9.1 in) Wheel type: Electrical system: Cast wheel (YFM70KPSH)
  • Page 171 Handlebar-mounted light: Low-range indicator light: 12 V, 35.0/36.5 W × 1 (YFM70KPAH, YFM70KPHH, LED (YFM70KPAH, YFM70KPHH, YFM70KPSH, YFM70KPSH, YFM70KPXH) YFM70KPXH) Tail/brake light: Differential gear lock indicator light: 12 V, 5.0/21.0 W × 1 LED (YFM70KPSH) Fuses: Meter lighting: EL (Electroluminescent) (YFM70KPAH, YFM70KPHH, Main fuse: YFM70KPSH, YFM70KPXH) 40.0 A...
  • Page 172 EBU30402 For Europe only The figures quoted are emission levels and are not necessarily safe working levels. Whilst there is a correlation between the emission and exposure levels, this cannot be used reliably to determine whether or not further precautions are required. Factors that influence the actual level of exposure of work-force include the characteristics of the work room, the other sources of noise, etc.

  • Page 173: Consumer Information

    Record the vehicle identification number and model label information in the spaces provided below for assistance when ordering spare parts from a Yamaha dealer or for reference in case the ATV is stolen. VEHICLE IDENTIFICATION NUMBER: 1. Vehicle identification number (front left side)
  • Page 174 1. Model label 11-2...

  • Page 175: Index

    INDEX Drive lever (YFM70KDXH / YFM70KPXH / YFM70KPHH / YFM70KPAH) ........4-15 Accessories and loading ..........6-5 Drive select lever ............4-19 Accessories, auxiliary jack ........... 4-26 Drive select lever and driving in reverse ......6-2 Air filter element, cleaning ........... 8-37 Axle boots ..............
  • Page 176 Indicator lights and warning lights .........4-2 Rear knuckle pivots, lubricating ........8-52 Instruments, lights and switches ........5-7 Reverse indicator light ........... 4-3 Riding your ATV ............. 7-1 Label locations ...............1-1 Light switch ..............4-10 Safety information ............2-1 Low-range indicator light (YFM70KPXH / Seat ................
  • Page 177 Wheel hub bearings, checking ........8-51 Wheel, installing ............8-64 Wheel, removing ............8-64 12-3...
  • Page 178 EBU26173 WARNING Improper ATV use can result in SEVERE INJURY or DEATH. NEVER USE ALWAYS USE NEVER USE NEVER CARRY AN APPROVED PASSENGERS WITH DRUGS ON PAVED HELMET AND OR ALCOHOL ROADS PROTECTIVE GEAR NEVER ALWAYS operate: • without proper training or instruction. •...

This manual is also suitable for:

Kodiak 700 yfm70kpshKodiak 700 yfm70kphhKodiak 700 yfm70kpahKodiak 700 yfm70kpxh

Table of Contents

Save PDF