hit counter script
Yamaha KODIAK 700 YFM70KDXG Owner's Manual
  1. Manuals
  2. Brands
  3. Yamaha Manuals
  4. Offroad Vehicle
  5. KODIAK 700 YFM70KDXG
  6. Owner's manual

Yamaha KODIAK 700 YFM70KDXG Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

READ THIS MANUAL CAREFULLY!
It contains important safety information.
LIRE ATTENTIVEMENT CE MANUEL!
Il comprend d'importantes informations de sécurité.
¡LEA ESTE MANUAL ATENTAMENTE!
Contiene indicaciones importantes acerca de la seguridad.
MANUEL DU PROPRIÉTAIRE
MANUAL DEL PROPIETARIO
YFM70KDXG/YFM70KDHG
YFM70KPXG/YFM70KPHG
OWNER'S MANUAL
YFM70KPSG
B16-F8199-60

Advertisement

Table of Contents
loading

Related Manuals for Yamaha KODIAK 700 YFM70KDXG

Summary of Contents for Yamaha KODIAK 700 YFM70KDXG

  • Page 1 READ THIS MANUAL CAREFULLY! It contains important safety information. LIRE ATTENTIVEMENT CE MANUEL! Il comprend d’importantes informations de sécurité. ¡LEA ESTE MANUAL ATENTAMENTE! Contiene indicaciones importantes acerca de la seguridad. OWNER’S MANUAL MANUEL DU PROPRIÉTAIRE MANUAL DEL PROPIETARIO YFM70KDXG/YFM70KDHG YFM70KPXG/YFM70KPHG YFM70KPSG B16-F8199-60...
  • Page 2 Original instructions Notice originale Manual original PRINTED IN USA 2015.03-1.9×1 CR (E,F,S)
  • Page 3 READ THIS MANUAL CAREFULLY! It contains important safety information. OWNER’S MANUAL YFM70KDXG/YFM70KDHG YFM70KPXG/YFM70KPHG YFM70KPSG WARNING This ATV should not be ridden by anyone under 16 years of age. B16-F8199-60-E0...

  • Page 4: Ec Declaration Of Conformity

    Read this manual carefully before operating this vehicle. This manual should stay with this ve- hicle if it is sold. EC Declaration of Conformity conforming to Directive 2006/42/EC We, YAMAHA MOTOR CO., LTD. 2500 Shingai, Iwata, Japan, declare in sole responsibility, that the product YFM700FWB (YFM70KDXG) (5Y4AM94W0E0500101–)
  • Page 5 EC Declaration of Conformity conforming to Directive 2006/42/EC We, YAMAHA MOTOR CO., LTD. 2500 Shingai, Iwata, Japan, declare in sole responsibility, that the product YFM700FWBD (YFM70KPXG) (5Y4AMA2W0E0500101–) (YFM70KPHG) (5Y4AMB5W0E0500101–) (YFM70KPSG) (5Y4AMB1W0E0500101–) (Make, model) to which this declaration applies, conforms to the essential health and...
  • Page 6 YFM70KPHG / YFM70KPSG. This ATV represents the result of many years of Yamaha experience in the production of fine sporting, touring, and pacesetting racing machines. With the purchase of this Yamaha, you can now appreciate the high degree of craftsmanship and reliability that have made Yamaha a leader in these fields.
  • Page 7 EBU17331 IMPORTANT MANUAL INFORMATION EBU17343 FAILURE TO FOLLOW THE WARNINGS CONTAINED IN THIS MANUAL CAN RESULT IN SERIOUS IN- JURY OR DEATH. Particularly important information is distinguished in this manual by the following notations: This is the safety alert symbol. It is used to alert you to potential per- sonal injury hazards.
  • Page 8 Please check your local riding laws and regulations before operating this ATV. EBU17411 YFM70KDXG / YFM70KDHG YFM70KPXG / YFM70KPHG / YFM70KPSG OWNER’S MANUAL ©2015 by Yamaha Motor Co., Ltd. 1st edition, February 2015 All rights reserved. Any reprinting or unauthorized use without the written permission of Yamaha Motor Co., Ltd.

  • Page 9: Table Of Contents

    EBU17421 TABLE OF CONTENTS LOCATION OF THE WARNING AND Drive select lever ........4-18 SPECIFICATION LABELS ......1-1 Fuel tank cap ..........4-18 Fuel ............4-19 SAFETY INFORMATION ........ 2-1 Seat ............4-20 Storage compartment....... 4-21 DESCRIPTION..........3-1 Front carrier ..........4-23 Left view............
  • Page 10 Instruments, lights and switches ....5-7 PERIODIC MAINTENANCE AND ADJUSTMENT ..........8-1 OPERATION ...........6-1 Owner’s manual and tool kit....... 8-2 Starting the engine ........6-1 Periodic maintenance chart for the Operating the drive select lever and emission control system......8-3 driving in reverse........6-2 General maintenance and lubrication Engine break-in ...........6-4 chart............
  • Page 11 Adjusting the rear brake lever and brake SPECIFICATIONS........10-1 pedal free play ........8-46 Axle boots ..........8-48 CONSUMER INFORMATION....... 11-1 Brake light switches ........8-49 Identification numbers ......11-1 Checking and lubricating the cables..8-49 Checking and lubricating the front and INDEX ............

  • Page 12: Location Of The Warning And Specification Labels

    Read and understand all of the labels on your ATV. These labels contain important information for safe and proper operation. Never remove any labels from your ATV. If a label becomes difficult to read or comes off, request a re- placement label from your Yamaha dealer.
  • Page 13 For Europe...
  • Page 14 < 50 kg ( 110 lbs) B16-F817R-00 < 90 kg YAMAHA 1P0-F816P-20 ( 198 lbs) B16-F817R-10 < 5880 N < 600 kgf < 1322 lbf < 147 N < 15 kgf < 33 lbf 37S-F817S-00 35.0 kPa 30.0 kPa 0.35 kgf/cm²...
  • Page 15 6 YFM70KDXG/YFM70KDHG YFM700FWB 2015 36.0 kW YAMAHA MOTOR CO., LTD. 300 kg 2500 SHINGAI, IWATA, JAPAN B16-F155A-00 6 YFM70KPXG/YFM70KPHG YFM700FWBD 2015 36.0 kW YAMAHA MOTOR CO., LTD. 307 kg 2500 SHINGAI, IWATA, JAPAN 2SM-F155A-00 6 YFM70KPSG YFM700FWBD 2015 36.0 kW YAMAHA MOTOR CO., LTD.
  • Page 16 < 4 kg ( 9 lb ) B16-F816N-01 YAMAHA 1P0-F816R-00...
  • Page 17 Familiarize yourself with the following pictograms and read the explanatory text, then make sure to check the pictograms that apply to your model. Read the Owner’s manual. NEVER use on paved roads. ALWAYS use an approved helmet and NEVER carry passengers. protective gear.
  • Page 18 This unit contains high-pressure nitrogen Turning 4WD-LOCK gas. (“DIFF.LOCK”) takes more effort. Operate at a slow speed and allow extra Mishandling can cause an explosion. Do not incinerate, puncture or open. time and distance for maneuvers to avoid loss of control. This pictogram shows the loading limits and/or maximum load capacity for this ATV.
  • Page 19 Year of construction Model Name ****** **** *** kW YAMAHA MOTOR CO., LTD. Max. Power *** kg 2500 SHINGAI, IWATA, JAPAN Mass In Running Order...
  • Page 20 For Oceania...
  • Page 21 WARNING LOAD LIMIT NEVER ride as a passenger. 50 kg (110 lbs) Passengers can cause YAMAHA B16-F4877-A0 a loss of control, resulting in SEVERE INJURY or DEATH. YAMAHA MAXIMUM LOADING LIMIT LOAD LIMIT PULLING LOAD: 5880 N (600 kgf) 1322 lbf...
  • Page 22 Maximum Vehicle Load : 240 kg, (530 lbs) Includes weight of operator, cargo and accessories UNDER (and if applicable, trailer tongue weight). YAMAHA B16-F816M-00 Operating this ATV if you are under the age of 16 increases your chance of severe injury or death.
  • Page 23 • use proper riding techniques to avoid vehicle overturns on hills and rough terrain and in turns. • avoid paved surfaces-pavement may seriously affect handling and control. LOCATE AND READ OWNER’S MANUAL. FOLLOW ALL INSTRUCTIONS AND WARNINGS. YAMAHA 4XE-F1568-10 1-12...

  • Page 24: Safety Information

    EBU17432 SAFETY INFORMATION SAFETY INFORMATION  Never allow a child under age 16 to operate an EBU27254 ATV without adult supervision, and never allow AN ATV IS NOT A TOY AND CAN BE HAZARD- continued use of an ATV by a child if he or she OUS TO OPERATE.
  • Page 25  Never operate at speeds too fast for your skills  Never operate the ATV on hills too steep for the or the riding conditions. Always go at a speed ATV or for your abilities. Practice on smaller hills that is proper for the terrain, visibility, operating before attempting larger hills.
  • Page 26  Never operate an ATV in fast flowing water or in technique described in this manual on level ground. Avoid crossing the side of a steep hill if water deeper than that recommended in this possible. manual. Remember that wet brakes may have ...
  • Page 27  Never maintain an ATV without proper knowl- vehicle. If the vehicle is in safe operating con- edge. Contact an authorized ATV dealer to in- dition and you can safely operate it, restart it form you on basic ATV maintenance. Certain and ride gently back to camp or other known maintenance can only be carried out by certified location where you can receive medical at-...
  • Page 28 While you may find aftermarket products similar in therefore, such accessories are not recom- design and quality to genuine Yamaha accesso- mended. ries, recognize that some aftermarket accessories  Use caution when adding electrical accesso- or modifications are not suitable because of po- ries.
  • Page 29  Do not run engine outdoors where engine EWB00073 WARNING exhaust can be drawn into a building through openings such as windows and doors. Avoid Carbon Monoxide Poisoning All engine exhaust contains carbon monoxide, a deadly gas. Breathing carbon monoxide can cause headaches, dizziness, drowsiness, nau- sea, confusion, and eventually death.

  • Page 30: Description

    EBU17681 DESCRIPTION EBU17691 EBU17701 Left view Right view 1. Radiator cap 1. Rear shock absorber assembly spring preload adjusting ring (YFM70KPXG / YFM70KPHG / YFM70KPSG) 2. Battery 2. Fuel tank cap 3. Fuses 3. Owner’s tool kit 4. Air filter case 4.

  • Page 31: Controls And Instruments

    YFM70KPXG / YFM70KPHG / YFM70KPSG EBU17714 Controls and instruments 2 3 4 6 7 8 9 10 11 YFM70KDXG / YFM70KDHG 2 3 4 7 8 9 10 1. Drive select lever 2. Rear brake lever 3. Handlebar switches 1. Drive select lever 4.
  • Page 32 The ATV you have purchased may differ slightly from the figures shown in this manual.

  • Page 33: Instrument And Control Functions

    EBU17737 INSTRUMENT AND CONTROL FUNCTIONS EBU29912 Main switch The positions of the main switch are as follows: “ ” (on) All electrical systems are supplied with power. The headlights and taillight come on when the light switch is on, and the engine can be started. The key cannot be removed.

  • Page 34: Indicator Lights And Warning Lights

    YFM70KPXG / YFM70KPHG / YFM70KPSG EBU26697 Indicator lights and warning lights YFM70KDXG / YFM70KDHG 1 2 3 4 5 6 1. On-Command differential gear lock indicator light “DIFF. LOCK” (YFM70KPSG) 2. Low-range indicator light “L” 1. Fuel level warning light “ ”...
  • Page 35 “ ” (on), or if the warning EBU17861 Neutral indicator light “ ” light remains on, have a Yamaha dealer check the This indicator light comes on when the transmis- electrical circuit. sion is in the neutral position.
  • Page 36 “ ” (on), or if the warning 0.88 Imp.gal). When this occurs, refuel as soon as light remains on, have a Yamaha dealer check the possible. electrical circuit. The electrical circuit of the warning light can be checked by setting the engine stop switch to “...
  • Page 37 Four-wheel-drive indicator “ ” (YFM70KPXG / YFM70KPHG / YFM70KPSG)  If the engine is stopped using the engine stop This indicator comes on when the drive lever or switch and the key is in the “ ” (on) position, the On-Command four-wheel-drive switch is set the EPS warning light comes on to indicate that to the “4WD”...

  • Page 38: Multi-Function Display (Yfm70Kpxg / Yfm70Kphg / Yfm70Kpsg)

    completely locked or unlocked. In this case, start The multi-function display is equipped with the moving to allow time for the differential to lock or following:  a speedometer unlock.  an odometer  two tripmeters (which show the distance trav- EBU30495 Multi-function display (YFM70KPXG / eled since they were last set to zero)
  • Page 39 CLOCK → HOUR → CLOCK warning indicator will start flashing. If this occurs, have a Yamaha dealer check the electrical circuit. To set the clock 1. Set the display to the clock mode.
  • Page 40 If a problem is detected in any of those circuits, the multi-function display will indicate an error code. If the multi-function display indicates an error code, note the code number, and then have a Yamaha dealer check the vehicle.

  • Page 41: Handlebar Switches

    YFM70KPSG ECB00812 NOTICE If the multi-function display indicates an error code, the vehicle should be checked as soon as possible in order to avoid engine damage. EBU18065 Handlebar switches YFM70KDXG / YFM70KDHG / YFM70KPXG / YFM70KPHG 1. Light switch “ /OFF”...
  • Page 42 EBU18102 EBU18192 Start switch “ ” Override switch “OVERRIDE” (YFM70KPSG) Push this switch to crank the engine with the start- er. See the starting instructions on page 6-1 prior to starting the engine. EBU34120 Light switch “ /OFF” Set this switch to “ ”...
  • Page 43 In this case, take the ATV to a Yamaha dealer at the moving may cause the ATV to unexpectedly handle differently. This could distract the oper- first opportunity.
  • Page 44  “4WD” (four-wheel drive): Power is supplied to EBU30463 On-Command differential gear lock switch the rear and front wheels. “4WD”/“LOCK” (YFM70KPSG) To change from two-wheel drive to four-wheel EWB00132 drive, stop the ATV and push the switch in to the WARNING “4WD”...
  • Page 45 control and have an accident if you cannot make a sharp enough turn for the speed you are traveling. This ATV is equipped with a switch allowing you to lock the differential gear when in four-wheel drive. Select the appropriate switch position according to the terrain and the conditions.
  • Page 46 LOCK 1. Differential gear lock lever 1. On-Command differential gear lock switch “4WD”/“LOCK” 2. On-Command four-wheel-drive switch “2WD”/“4WD” To unlock the differential gear, stop the ATV and Stop the ATV, move the differential gear lock lever push the switch to the “4WD” position. to position (a), and then push the differential gear lock switch in to the “LOCK”...

  • Page 47: Drive Lever "2Wd"/"4Wd" (Yfm70Kdxg / Yfm70Kdhg / Yfm70Kpxg / Yfm70Kphg)

     Riding before the differential gear is properly en- handle differently. This could distract the oper- gaged or disengaged (e.g., when the indicator ator and increase the risk of losing control and and indicator light are flashing) will cause the of causing an accident.

  • Page 48: Throttle Lever

    1. Drive lever “2WD”/“4WD” 1. Throttle lever 2. “2WD” position Before starting the engine, check the throttle to be 3. “4WD” position sure it is operating smoothly. Make sure it returns to the idle position as soon as the lever is released. EBU18283 Throttle lever EBU18324...

  • Page 49: Front Brake Lever

    decrease the maximum engine power avail- 3. Tighten the locknut. able and the maximum speed of the ATV, turn EBU18392 the adjusting screw in direction (b). Do not Front brake lever turn the adjusting screw out more than 12 The front brake lever is located on the right han- mm (0.47 in) or the throttle cable could be dlebar.

  • Page 50: Drive Select Lever

    EBU18612 Drive select lever The drive select lever is used to shift your ATV into the low-range, high-range, neutral, reverse and park positions. See the “Operating the drive select lever and driving in reverse” section on page 6-2 for the drive select lever operation. 1.

  • Page 51: Fuel

    of sparks, open flames, or other sources of ignition such as the pilot lights of water heat- ers and clothes dryers. 2. Do not overfill the fuel tank. When refueling, be sure to insert the pump nozzle into the fuel tank filler hole.

  • Page 52: Seat

    4.0 L (1.06 US gal, 0.88 Imp.gal) rings, as well as to the exhaust system. 3. Wipe up any spilled fuel immediately. Your Yamaha engine has been designed to use NOTICE: Immediately wipe off spilled fuel regular unleaded gasoline with a research octane with a clean, dry, soft cloth, since fuel may number of 91 or higher (95 or higher for Europe).

  • Page 53: Storage Compartment

    1. Seat 1. Projection 2. Seat holder To install the seat EBU34151 Insert the projections on the front of the seat into Storage compartment the seat holders and push down on the seat at the ECB02320 rear. Make sure that the seat is securely fitted. NOTICE Do not store metal or sharply edged objects, like tools, in the storage compartment.
  • Page 54 When storing any documents in the storage com- partment, be sure to wrap them in a plastic bag so that they will not get wet. When washing the vehi- cle, be careful not to let any water enter the stor- age compartment.

  • Page 55: Front Carrier

    EBU19148 Adjusting the front and rear shock ab- sorber assemblies (YFM70KPXG / YFM70KPHG / YFM70KPSG) The spring preload can be adjusted to suit the rid- er’s weight and the riding conditions. EWB00401 WARNING Always adjust the shock absorber assemblies on the left and right side to the same setting. Uneven adjustment can cause poor handling 1.

  • Page 56: Trailer Hitch (Yfm70Kpxg / Yfm70Kphg / Yfm70Kpsg)

    1. Special wrench 1. Spring preload adjusting ring 2. Position indicator Spring preload setting: Minimum (soft): A special wrench can be obtained at a Yamaha Standard: dealer to make this adjustment. Maximum (hard): EBU28972 Trailer hitch (YFM70KPXG / YFM70KPHG / YFM70KPSG) This ATV is equipped with a 5 cm (2 in) trailer hitch receiver.

  • Page 57: Auxiliary Dc Jack

    Trailer towing equipment can be obtained at a 4. Open the auxiliary DC jack cap, and then in- Yamaha dealer. (See page 6-7 for precaution in- sert the accessory power plug into the jack. formation.) 1. Auxiliary DC jack cap 2.
  • Page 58 ECB00121 NOTICE  Do not use accessories requiring more than the above maximum capacity. This may overload the circuit and cause the fuse to blow.  If accessories are used without the engine running or with the headlights turned on, the battery will lose its charge and engine start- ing may become difficult.

  • Page 59: Pre-Operation Checks

    Do not operate the vehicle if you find any problem. If a problem cannot be corrected by the procedures provided in this manual, have the vehicle inspected by a Yamaha dealer. Before using this vehicle, check the following points:...
  • Page 60 ITEM ROUTINE PAGE • Check operation. If soft or spongy, have Yamaha dealer bleed hy- draulic system. • Check brake pads for wear, and replace if necessary. Front brake 5-3, 8-43, 8-44, 8-45 • Check brake fluid level in reservoir, and add specified brake fluid to specified level if necessary.

  • Page 61: Fuel

     Check that there is no free play in the front EBU19591 Final gear oil brake lever. If there is free play, have a Yamaha Make sure that the final gear oil is at the specified dealer check the brake system.

  • Page 62: Throttle Lever

    If there is any leakage, the brake proper tire pressure may cause severe injury or system should be checked by a Yamaha dealer. death from loss of control or rollover. Tire pressure below the minimum specified could...
  • Page 63 Recommended tire pressure: Front 35.0 kPa (0.350 kgf/cm², 5.0 psi) Rear 30.0 kPa (0.300 kgf/cm², 4.4 psi) Minimum tire pressure: Front 32.0 kPa (0.320 kgf/cm², 4.6 psi) Rear 27.0 kPa (0.270 kgf/cm², 4.0 psi) Maximum tire seating pressure: 1. Low-pressure tire gauge Front 250 kPa (2.5 kgf/cm², 36 psi) Tire wear limit...
  • Page 64 After extensive tests, only the tires listed below braking, and comfort. Other tires, rims, sizes, and have been approved for this model by Yamaha combinations may not be appropriate. Motor Manufacturing Corporation of America.

  • Page 65: Chassis Fasteners

    EBU19841 Chassis fasteners Make sure that all nuts, bolts and screws are properly tightened. EBU19851 Instruments, lights and switches Check that all instruments, lights and switches are working properly. Correct if necessary.

  • Page 66: Operation

    The corresponding indicator light should come on. If the indicator light does not come See the “Engine break-in” section on page 6-4 on, have a Yamaha dealer check the electrical prior to operating the engine for the first time. circuit.

  • Page 67: Operating The Drive Select Lever And Driving In Reverse

     The drive select lever is in the neutral or park po- EBU20442 Operating the drive select lever and sition. driving in reverse  The rear brake lever or brake pedal is applied with the drive select lever in any position. How- ECB00171 NOTICE ever, it is recommended to shift into the neutral...
  • Page 68 reverse, make sure there are no people or ob- stacles behind you. When it is safe to proceed, go slowly. 1. Bring the ATV to a complete stop. 2. Apply the brake pedal. The drive select lever cannot be shifted into or from reverse or park without applying the brake pedal.

  • Page 69: Engine Break-In

    320 km (200 mi) or should come on. If the indicator light does not 20 hours. The various parts in the engine wear and come on, have a Yamaha dealer check the elec- polish themselves to the correct operating clear- trical circuit.

  • Page 70: Parking

    If any engine trouble should occur during the 1. Bring the ATV to a stop by applying the engine break-in period, immediately have a brakes. Yamaha dealer check the ATV. 2. Stop the engine. 3. With the brake pedal applied, shift the drive EBU27322 Parking select lever to the park position.

  • Page 71: Accessories And Loading

    ATV. Yamaha vehicles. Yamaha is not in a position to  Do not mount an accessory where it could inter- test the products that these aftermarket compa- fere with your ability to control the ATV.
  • Page 72  Never exceed the weight limits shown. An over- bulky object attached to the handlebars which could make steering difficult, an accessory that loaded ATV can be unstable. limits your ability to move around on the seat, or MAXIMUM LOADING LIMIT one that limits your view.
  • Page 73 the weight on the hitch. If you are carrying cargo and towing a trailer, include the tongue weight in the maximum ATV load limit.  Load cargo on the carriers as close to the center of the ATV as possible. Put cargo at the rear of the front carrier, at the front of the rear carrier, and center it.

  • Page 74: Riding Your Atv

    EBU21142 RIDING YOUR ATV...

  • Page 75: Getting To Know Your Atv

    RIDE WITH CARE AND GOOD JUDGMENT EBU34290 Get training if you are inexperienced. GETTING TO KNOW YOUR ATV EWB01382 This ATV is mainly for utility use, but may also be WARNING used for recreation. This section, Riding your ATV,  Do not operate this ATV or allow anyone else provides general ATV riding instructions for recre- to operate it without proper instruction.
  • Page 76 the time to learn the basic techniques well before This ATV is designed to carry the operator and attempting more difficult maneuvers. Become fa- cargo only – passengers prohibited. miliar with this ATV at slow speeds first, even if you The long seat is to allow the operator to shift posi- are an experienced operator.
  • Page 77 Apparel Always wear the following to reduce risk of injury in an accident:  Approved motorcycle helmet that fits properly  Eye protection (goggles, helmet face shield, or protective eyewear)  Over-the-ankle boots, gloves, long-sleeved shirt or jacket, and long pants An approved helmet and other personal protective equipment can reduce the severity of injuries in an accident.
  • Page 78 1. Protective clothing Pre-operation checks 2. Goggles Always inspect your ATV each time you use it to 3. Gloves make sure the ATV is in safe operating condition. 4. Boots 5. Helmet Perform the pre-operation checks listed on page 5-1. Always follow the inspection and mainte- Do not operate after or while consuming alco- nance procedures and schedules described in the hol or drugs.
  • Page 79  Do not exceed the maximum loading limits fully opening, even when the throttle lever is pushed to the maximum. Turning in the adjusting for the vehicle (see “MAXIMUM LOADING screw limits the maximum engine power available LIMIT” in this section or vehicle labeling). ...
  • Page 80 During operation MAXIMUM LOADING LIMIT Always keep your feet on the footboards during ATV loading limit (total weight of cargo, rid- operation; otherwise, they may contact the rear er, accessories, and tongue): wheels. WARNING! Removing even one hand or 240.0 kg (530 lb) foot can reduce your ability to control the ATV Front carrier: or could cause you to lose your balance and...
  • Page 81 ATV should during operation or after leaving the ATV, do not be genuine Yamaha or equivalent components let brush, grass and other materials collect under designed for use on this ATV and should be in- the vehicle, near the muffler or exhaust pipe, or stalled and used according to instructions.

  • Page 82: Be Careful Where You Ride

    To prevent burns, avoid touching the exhaust sys- BE CAREFUL WHERE YOU RIDE tem. Park the ATV in a place where pedestrians or This ATV is designed for use on unpaved surfaces children are not likely to touch it. only. WARNING! Paved surfaces may seriously affect handling and control of the ATV, and may cause the ATV to go out of control.
  • Page 83 know your country’s laws and regulations before ful when operating on unfamiliar terrain. Al- you ride on unpaved public streets or roads. Do ways be alert to changing terrain conditions not ride on any paved public street, road or motor- when operating the ATV.
  • Page 84 terrain could cause loss of traction or ATV con- trol, which could result in an accident, includ- ing an overturn. [EWB01542] Do not ride in areas posted “no trespassing”. Do not ride on private property without getting permission. When riding in an area where you might not easily be seen, such as desert terrain, mount a caution flag on the ATV.

  • Page 85: Turning Your Atv

    Select a large, flat, unpaved area to become famil- ECB00252 NOTICE iar with your ATV. Make sure that this area is free of obstacles and other riders. You should practice Do not shift from low-range to high-range or control of the throttle, brakes, shifting procedures, vice versa without coming to a complete stop.

  • Page 86: Climbing Uphill

    As you approach a curve, slow down and begin to may continue to go straight. If the ATV doesn’t turn the handlebars in the desired direction. As turn, come to a stop and then practice the proce- you do so, put your weight on the footboard to the dure again.
  • Page 87  Never operate the ATV on hills too steep for the ATV or for your abilities. The ATV can overturn more easily on extremely steep hills than on level surfaces or small hills.  Always check the terrain carefully before you start up any hill.
  • Page 88 Do not attempt to climb hills until you have mas- If you are climbing a hill and you find that you have tered basic maneuvers on flat ground. Always not properly judged your ability to make it to the check the terrain carefully before attempting any top, you should turn the ATV around while you still hill.

  • Page 89: Riding Downhill

     Always check the terrain carefully before you straight uphill. Turn the ATV around and remount, following the procedure described in the Owner’s start down any hill.  Never operate the ATV on hills too steep for Manual. WARNING! Stalling, rolling backwards or improperly dismounting while climbing a hill the ATV or for your abilities.

  • Page 90: Crossing A Slope

    Use caution while descending a hill with loose or slippery surfaces. Braking ability and traction may be adversely affected by these surfaces. Improper braking may also cause a loss of traction. When this ATV is in “4WD”, all wheels (front and rear) are interconnected by the drive train.

  • Page 91: Crossing Through Shallow Water

     Shift your weight to the uphill side of the ATV.  Never attempt to turn the ATV around on any hill until you have mastered the turning tech- nique as described in the Owner’s Manual on level ground. Be very careful when turning on any hill.
  • Page 92 The ATV can be used to cross slow moving, shal- braking ability. WARNING! Wet brakes may have low water of up to a maximum of 35 cm (14 in) in reduced stopping ability, which could cause depth. Before entering the water, choose your loss of control.

  • Page 93: Riding Over Rough Terrain

    1. Air filter case check hose 1. V-belt case drain plug RIDING OVER ROUGH TERRAIN EWB01652 WARNING Riding improperly over obstacles could cause loss of control or a collision. Before operating in a new area, check for obstacles. Never at- tempt to ride over large obstacles, such as large rocks or fallen trees.

  • Page 94: Sliding And Skidding

    accident. Be sure to keep your feet firmly mounted To reduce the tendency for the front wheels to on the footboards at all times. Avoid jumping the slide in loose or slippery conditions, positioning ATV as loss of control and damage to the ATV may your weight over the front wheels will sometimes result.

  • Page 95: What To Do If

    WHAT TO DO...  If your ATV doesn’t turn when you want it to: Bring the ATV to a stop and practice the turning maneuvers again. Be sure you are putting your weight on the footboard to the outside of the turn.
  • Page 96  If your ATV is traversing a sloping surface: Be sure to ride with your weight positioned to- wards the uphill side of the ATV to maintain proper balance. If the ATV starts to tip, steer down the hill (if there are no obstacles in your way) to regain balance.

  • Page 97: Periodic Maintenance And Adjustment

    The intervals given in the periodic maintenance vice or while using the vehicle. If you are not fa- charts should be considered as a general guide miliar with vehicle service, have a Yamaha under normal riding conditions. However, DE- dealer perform the service.

  • Page 98: Owner's Manual And Tool Kit

    Make sure to protect the owner’s If you do not have the tools or experience required manual by putting it in the plastic bag, then by for a particular job, have a Yamaha dealer perform placing the bag in the document pouch. it for you.

  • Page 99: Periodic Maintenance Chart For The Emission Control System

    However, keep in mind that if the ATV isn’t used for a long period of time, the month maintenance intervals should still be followed.  Items marked with an asterisk should be performed by a Yamaha dealer as they require special tools, data and technical skills.
  • Page 100 INITIAL EVERY month Whichev- CHECK OR MAINTENANCE ITEM er comes 1300 2500 2500 5000 km (mi) first (200) (800) (1600) (1600) (3200) hours √ √ √ Spark arrester • Clean. • Check the air cut-off valve, reed valve, and hose Air induction sys- √...

  • Page 101: General Maintenance And Lubrication Chart

    However, keep in mind that if the ATV isn’t used for a long period of time, the month maintenance intervals should still be followed.  Items marked with an asterisk should be performed by a Yamaha dealer as they require special tools, data and technical skills.
  • Page 102 INITIAL EVERY month Whichev- CHECK OR MAINTENANCE ITEM er comes 1300 2500 2500 5000 km (mi) first (200) (800) (1600) (1600) (3200) hours • Check for cracks or other damage, and replace if √ √ √ √ necessary. Brake hoses •...
  • Page 103 INITIAL EVERY month Whichev- CHECK OR MAINTENANCE ITEM er comes 1300 2500 2500 5000 km (mi) first (200) (800) (1600) (1600) (3200) hours √ √ √ Steering shaft • Lubricate with lithium-soap-based grease. • Check operation and repair or replace if dam- √...
  • Page 104 INITIAL EVERY month Whichev- CHECK OR MAINTENANCE ITEM er comes 1300 2500 2500 5000 km (mi) first (200) (800) (1600) (1600) (3200) hours Moving parts and √ √ √ √ • Lubricate. cables Drive select lever • Check operation and adjust or replace if neces- √...
  • Page 105 • Every two years replace the internal components of the brake master cylinder and calipers, and change the brake fluid. • Replace the brake hoses every four years and if cracked or damaged.

  • Page 106: Removing And Installing Panels

    EBU23091 Removing and installing panels The panels shown need to be removed to perform some of the maintenance jobs described in this chapter. Refer to this section each time a panel needs to be removed and installed. 1. Panel E 2.
  • Page 107 Panel B To remove the panel 1. Remove panel A. 2. Remove the front carrier by removing the bolts. 1. Panel A To install the panel Place the panel in the original position. 1. Front carrier 2. Carrier bolt (upper) 8-11...
  • Page 108 1. Carrier bolt (under the fenders) 1. Panel B 2. Carrier bolt (lower) 2. Quick fastener 3. Remove the quick fasteners, and then pull the To install the panel panel upward to remove it. 1. Place the panel in the original position, and then install the quick fasteners.
  • Page 109 Panel C To remove the panel 1. Remove the seat. (See page 4-20.) 2. Remove panel A. 3. Remove the hoses from panel C. 2. Install the front carrier by installing the bolts and tightening them to the specified torques. Tightening torques: Carrier bolt (upper): 34 Nm (3.4 m·kgf, 25 ft·lbf)
  • Page 110 1. Bolt 1. Screw 2. Quick fastener To install the panel 5. Remove the screws under the storage com- 1. Place the panel in the original position. partment lid, and then pull the panel upward to remove it. To ease removal of panel C, shift the drive select lever into the reverse position.
  • Page 111 2. Install the screws, quick fasteners, bolts, and hoses. Make sure that the hoses are properly connected and routed, and are not pinched. 3. Install panel A. 4. Install the seat. Panels D and E To remove a panel 1. Panel D 1.
  • Page 112 To install a panel Panels F and G 1. Place the panel in the original position, and To remove a panel then install the bolt. 1. Remove the panel bolts, footboard bolt, and footboard nut. 1. Panel F 2. Footboard nut 3.
  • Page 113 1. Panel G 2. Footboard nut 3. Footboard bolt 4. Panel bolt 5. Projection 2. Pull the panel downward while pushing the projection. To install a panel 1. Place the panel in the original position. 2. Install the bolts and nut, and then tighten them to the specified torques.

  • Page 114: Checking The Spark Plug

    Tightening torques: Panel bolt: 4.0 Nm (0.40 m·kgf, 2.9 ft·lbf) Footboard nut: 4.0 Nm (0.40 m·kgf, 2.9 ft·lbf) EBU34190 Checking the spark plug The spark plug is an important engine component, which is easy to check. Since heat and deposits will cause any spark plug to slowly erode, the 1.

  • Page 115: To Check The Spark Plug

    Do not attempt to diagnose such problems yourself. In- stead, have a Yamaha dealer check the vehicle. 2. Check the spark plug for electrode erosion and excessive carbon or other deposits, and replace it if necessary.
  • Page 116 Tightening torque: Spark plug: 11 Nm (1.1 m·kgf, 8.0 ft·lbf) If a torque wrench is not available when installing the spark plug, a good estimate of the correct torque is 1/4–1/2 turn past finger tight. However, the spark plug should be tightened to the speci- fied torque as soon as possible.

  • Page 117: Engine Oil And Oil Filter Cartridge

    EBU27468 Engine oil and oil filter cartridge The engine oil level should be checked before each ride. In addition, the oil must be changed and the oil filter cartridge replaced at the intervals specified in the periodic maintenance and lubrica- tion chart.
  • Page 118 5. Insert the dipstick completely into the oil filler 7. Insert the dipstick completely into the oil filler hole, and then remove it again to check the oil hole. level. 8. Install the access cover by turning it clock- wise. The engine oil should be between the minimum To change the engine oil (with or without oil fil- and maximum level marks.
  • Page 119 1. Oil filter cartridge 2. Gasket 2. Oil filter wrench Skip steps 5–9 if the oil filter cartridge is not being An oil filter wrench is available at a nearby Yamaha replaced. dealer. 5. Remove panel F. (See page 8-10.) 7.
  • Page 120 1. O-ring 1. Torque wrench Tightening torque: Oil filter cartridge: Make sure that the O-ring is properly seated. 15 Nm (1.5 m·kgf, 11 ft·lbf) 8. Install the new oil filter cartridge with an oil fil- 9. Install panel F. ter wrench, and then tighten it to the specified 10.

  • Page 121: Final Gear Oil

    The final gear case must be checked for oil leak- age before each ride. If any leakage is found, have ECB00301 a Yamaha dealer check and repair the ATV. In ad- NOTICE dition, the final gear oil level must be checked and ...
  • Page 122 2. Remove the final gear oil level check bolt and its gasket, and then check the oil level in the final gear case. The oil level should be at the brim of the check hole. 1. Final gear oil filler bolt 2.
  • Page 123 To change the final gear oil Tightening torque: 1. Place the ATV on a level surface. Final gear oil drain bolt: 2. Place an oil pan under the final gear case to 23 Nm (2.3 m·kgf, 17 ft·lbf) collect the used oil. 3.

  • Page 124: Differential Gear Oil

    2. Gasket leakage before each ride. If any leakage is found, 3. Differential gear oil have a Yamaha dealer check and repair the ATV. 4. Correct oil level In addition, the differential gear oil level must be 3. If the oil is below the brim of the filler hole, add...
  • Page 125 5. Install the oil filler bolt and its gasket, and then 4. Install the drain bolt and its new gasket, and tighten the bolt to the specified torque. then tighten the bolt to the specified torque. Tightening torque: Tightening torque: Differential gear oil filler bolt: Differential gear oil drain bolt: 23 Nm (2.3 m·kgf, 17 ft·lbf)

  • Page 126: Coolant

    Recommended differential gear oil: See page 10-1. The coolant level must be checked on a cold en- gine since the level varies with engine tempera- 6. Check the oil filler bolt gasket for damage, ture. and replace it if necessary. 7.
  • Page 127 0.25 L (0.26 US qt, 0.22 Imp.qt) a Yamaha dealer check the antifreeze con- tent of the coolant as soon as possible, otherwise the effectiveness of the coolant will be reduced.
  • Page 128 EBU34210 To change the coolant EWB01891 WARNING Wait for the engine and radiator to cool before removing the radiator cap. You could be burned by hot fluid and steam blown out under pressure. Always place a thick rag over the cap when opening.
  • Page 129 1. Coolant drain bolt 1. Radiator cap 2. Gasket 6. Remove the coolant reservoir cap. 7. Disconnect the coolant reservoir hose on the coolant reservoir side, and then drain the coolant from the coolant reservoir. 1. Trough 5. Remove the radiator cap. 8-33...
  • Page 130 12. Pour the recommended coolant into the res- ervoir to the maximum level mark, and then install the reservoir cap. NOTICE: Mix anti- freeze with distilled water only. However, if distilled water is not available, soft water may be used for refilling. Do not use hard water or salt water since they are harmful to the engine.
  • Page 131 1. Water pump air bleed bolt 1. Cylinder head air bleed bolt 14. When coolant begins to flow out of the bolt 17. When coolant begins to flow out of the bolt hole, tighten the water pump air bleed bolt to hole, tighten the cylinder head air bleed bolt the specified torque.
  • Page 132 22. Start the engine, and then check for coolant leakage. If any leakage is found, have a Yamaha dealer check the cooling system. 1. Footboard nut 23. Install the footboard by installing the bolts 2.

  • Page 133: Cleaning The Air Filter Element

    EBU34230 Cleaning the air filter element The air filter element should be cleaned at the in- tervals specified in the periodic maintenance and lubrication chart. Clean or, if necessary, replace the air filter element more frequently if you are rid- ing in unusually wet or dusty areas.
  • Page 134 2. Remove the seat. (See page 4-20.) 3. Remove the air filter case cover by unhooking the air filter case cover holders. 1. Air filter element 5. Pull off the air filter element lock plate, and then remove the sponge material from the air 1.
  • Page 135 2. Sponge material damaged. 3. Air filter element lock plate 9. Apply Yamaha foam air filter oil or other qual- 6. Wash the sponge material gently but thor- ity foam air filter oil to the sponge material. oughly in solvent. WARNING! Always use...

  • Page 136: Cleaning The Spark Arrester

    case. Never operate the engine with the air filter element removed. Doing so would al- low unfiltered air to enter the engine, caus- ing rapid engine wear and possible engine damage. Additionally, the fuel injection system would be affected resulting in poor engine performance and possible over- heating.

  • Page 137: V-Belt Case Drain Plug

    If water drains from the V-belt case after removing 5. Make sure the gasket is properly positioned, the plug, have a Yamaha dealer check the ATV as then insert the tailpipe into the muffler and the water may affect other engine parts.

  • Page 138: Adjusting The Throttle Lever Free Play

    3. To increase the throttle lever free play, turn the throttle lever free play adjusting bolt in di- rection (a). To decrease the throttle lever free play, turn the adjusting bolt in direction (b). 1. V-belt case drain plug EBU29703 Adjusting the throttle lever free play The throttle lever free play should be checked and, 1.

  • Page 139: Adjusting The Drive Select Lever Safety System Cable

    Yamaha dealer at the inter- EBU28414 Checking the front brake pads and rear vals specified in the periodic maintenance and lu- brake friction plates brication chart. The front brake pads and the rear brake friction...

  • Page 140: Checking The Brake Fluid Level

    EBU30321 Rear brake friction plates Specified brake fluid: The rear brake friction plates must be checked DOT 4 and, if necessary, replaced by a Yamaha dealer at the intervals specified in the periodic maintenance EWB02721 and lubrication chart. WARNING Improper maintenance can result in loss of braking ability.

  • Page 141: Changing The Brake Fluid

    If the brake fluid level goes down sud- mance. denly, have a Yamaha dealer check the cause be-  Clean the filler cap before removing. Use fore further riding. only DOT 4 brake fluid from a sealed contain-...

  • Page 142: Adjusting The Rear Brake Lever And Brake Pedal Free Play

    1. No brake lever free play 1. Brake lever free play 1. Loosen the locknut at the brake lever. EBU34242 Adjusting the rear brake lever and brake pedal free play The rear brake lever and brake pedal free play must be checked and, if necessary, adjusted at the intervals specified in the periodic maintenance and lubrication chart.
  • Page 143 2. To increase the brake lever free play, turn the 6. To increase the brake lever free play, turn the brake lever free play adjusting bolt in direction brake lever free play adjusting nut in direction (a). To decrease the brake lever free play, turn (a).

  • Page 144: Axle Boots

    Check the axle boots for tears or damage. If any damage is found, have them replaced by a Yamaha dealer. 1. Brake pedal free play adjusting nut 2. Locknut 3. To increase the brake pedal free play, turn the brake pedal free play adjusting nut in direc- tion (a).

  • Page 145: Brake Light Switches

    If a cable is damaged or does not move lows, but the front brake light switch should be ad- smoothly, have a Yamaha dealer check or replace justed by a Yamaha dealer. Turn the rear brake light switch adjusting nut while holding the brake light switch in place.

  • Page 146: Checking And Lubricating The Front And Rear Brake Levers

    EWB02582 Recommended lubricants: WARNING Front brake lever:  Inspect cables frequently and replace if Silicone grease damaged. Corrosion can result when the ca- Rear brake lever: ble sheaths become damaged, and cables Lithium-soap-based grease can also become frayed or kinked, which could restrict the operation of controls and Front brake lever lead to an accident or injury.

  • Page 147: Checking And Lubricating The Brake Pedal

    Yamaha dealer check the wheel hub bearings. To access the brake pedal pivot, remove panel G.

  • Page 148: Checking The Stabilizer Bushes

    Have a Yamaha dealer replace the stabilizer bush- es if necessary. For parts equipped with a grease nipple, use a grease gun.

  • Page 149: Lubricating The Steering Shaft

    YFM70KPXG / YFM70KPHG / YFM70KPSG EBU25094 Lubricating the steering shaft The steering shaft must be lubricated by a Yamaha dealer at the intervals specified in the pe- riodic maintenance and lubrication chart. For parts equipped with a grease nipple, use a grease gun.

  • Page 150: Battery

    KEEP OUT OF REACH OF CHILDREN. EBU2904D Battery ECB00621 The battery is located under panel A. (See page NOTICE 8-10.) Never attempt to remove the battery cell seals, This model is equipped with a VRLA (Valve Regu- as this would permanently damage the battery. lated Lead Acid) battery.
  • Page 151 To charge the battery their bolt. NOTICE: When removing the bat- Have a Yamaha dealer charge the battery as soon tery, the main switch must be off, and the as possible if it seems to have discharged. Keep...
  • Page 152 2. Connect the positive battery lead first, then ECB00932 NOTICE connect the negative battery lead by installing their bolt. NOTICE: When installing the bat- To charge a VRLA (Valve Regulated Lead Acid) tery, the main switch must be off, and the battery, a special (constant-voltage) battery charger is required.

  • Page 153: Replacing A Fuse

    EBU30521 Tightening torques: Replacing a fuse Carrier bolt (upper): 34 Nm (3.4 m·kgf, 25 ft·lbf) Carrier bolt (lower): 34 Nm (3.4 m·kgf, 25 ft·lbf) Carrier bolt (under the fenders): 7 Nm (0.7 m·kgf, 5.1 ft·lbf) 5. Install the panel. 1. Fuse box 2.
  • Page 154 ECB00641 NOTICE To prevent accidental short-circuiting, turn off the main switch when checking or replacing a fuse. 2. Remove the blown fuse, and then install a new fuse of the specified amperage. WARNING! Always use a fuse of the spec- ified rating, and never use a substitute ob- ject in place of the proper fuse.

  • Page 155: Replacing A Headlight Bulb

    4. If the fuse immediately blows again, have a Specified fuses: Yamaha dealer check the electrical system. Main fuse: 40.0 A EBU34220 Headlight fuse: Replacing a headlight bulb 10.0 A (YFM70KDHG, YFM70KDXG) If a headlight bulb burns out, replace it as follows.
  • Page 156 4. Remove the burnt-out bulb by pulling it out. 5. Place a new headlight bulb into position. NOTICE: Do not touch the glass part of the headlight bulb to keep it free from oil, oth- erwise the transparency of the glass, the luminosity of the bulb, and the bulb life will be adversely affected.
  • Page 157 7. Install the bulb holder cover and the cover at the rear of the headlight. NOTICE: Make sure the headlight bulb holder cover is se- curely fitted over the bulb holder and seat- ed properly. [ECB00672] 8. Adjust the headlight beam if necessary. Center headlight bulb...

  • Page 158: Adjusting A Headlight Beam

    Adjusting a headlight beam 1. Do not touch the glass part of the bulb. ECB00691 6. Install the bulb holder by pushing it in and NOTICE turning it clockwise. It is advisable to have a Yamaha dealer make this adjustment. 8-62...

  • Page 159: Replacing The Tail/Brake Light Bulb

    To raise a headlight beam, turn the headlight YFM70KPXG / YFM70KPHG / YFM70KPSG beam adjusting screw in direction (a). To lower a headlight beam, turn the adjusting screw in direction (b). 1. Headlight beam adjusting screw EBU25614 Replacing the tail/brake light bulb 1.

  • Page 160: Removing A Wheel

    3. Insert a new bulb into the bulb holder, push it in, and then turn it clockwise until it stops. 4. Install the bulb holder (together with the bulb) by turning it clockwise. EBU25652 Removing a wheel 1. Place the ATV on a level surface. 2.

  • Page 161: Installing A Wheel

    EBU25702 Installing a wheel 1. Place the ATV on a level surface. 2. Install the wheel and the nuts.  The arrow mark on the tire must point to- ward the rotating direction of the wheel.  Tapered nuts are used for both the front and rear wheels.

  • Page 162: Troubleshooting

    The following troubleshooting charts represent quick and easy procedures for checking these vi- tal systems yourself. However, should your ATV require any repair, take it to a Yamaha dealer, whose skilled technicians have the necessary tools, experience, and know-how to service the ATV properly.

  • Page 163: Troubleshooting Charts

    Remove the spark plug and check the electrodes. The engine does not start. Have a Yamaha dealer check the ATV. Check the compression. 4. Compression The engine does not start. There is compression.
  • Page 164 Start the engine. If the engine overheats again, have a The coolant level Yamaha dealer check and repair the cooling system. is OK. If coolant is not available, tap water can be temporarily used instead, provided that it is changed to the recommended coolant as soon as possible.

  • Page 165: Cleaning And Storage

    EBU25861 CLEANING AND STORAGE and deterioration of wheel bearings, EBU25882 Cleaning brakes, transmission seals and electrical Frequent, thorough cleaning of your ATV will not devices. Many expensive repair bills have only enhance its appearance but will improve its resulted from improper high-pressure de- general performance and extend the useful life of tergent applications such as those avail- many components.

  • Page 166: Storage

    3. Perform the following steps to protect the cyl- EBU27262 Storage inder, piston rings, etc. from corrosion. a. Remove the spark plug cap and spark Short-term plug. Always store your ATV in a cool, dry place and, if b. Pour a teaspoonful of engine oil into the necessary, protect it against dust with a porous spark plug bore.
  • Page 167 6. Cover the muffler outlet with a plastic bag to prevent moisture from entering it. 7. Remove the battery and fully charge it. Store it in a cool, dry place and charge it once a month. Do not store the battery in an exces- sively cold or warm place [less than 0 °C (30 °F) or more than 30 °C (90 °F)].

  • Page 168: Specifications

    EBU25962 SPECIFICATIONS Dimensions: Uncertainty of measurement: 0.0 m/s² (YFM70KPHG, YFM70KPSG_EUR/FRA/GBR, Overall length: YFM70KPXG_EUR/FRA/GBR) 2070 mm (81.5 in) 0.1 m/s² (YFM70KDHG, YFM70KDXG_EUR/FRA/GBR) Overall width: Vibration on handle (EN1032, ISO5008): 1180 mm (46.5 in) Will not exceed 2.5 m/s² (EUR/FRA/GBR) Overall height: Uncertainty of measurement: 1240 mm (48.8 in) 0.3 m/s²...
  • Page 169 Type: Quantity: SAE 0W-30, 10W-30, 10W-40, 15W-40, 20W-40 or 20W- 0.22 L (0.23 US qt, 0.19 Imp.qt) Coolant quantity: Coolant reservoir (up to the maximum level mark): 130 ˚F 0.25 L (0.26 US qt, 0.22 Imp.qt) Radiator (including all routes): SAE 0W-30 1.76 L (1.86 US qt, 1.55 Imp.qt) Air filter:...
  • Page 170 Transmission: Rear tire: Secondary reduction system: Type: Shaft drive Tubeless Secondary reduction ratio: Size: 43/21 × 24/18 × 33/9 (10.011) AT25 x 10-12 Transmission type: Manufacturer/model: V-belt automatic CHENG SHIN/C828 (AUS/NZL) Operation: MAXXIS/MU20 (EUR/FRA/GBR) Loading: Left hand operation Reverse gear: Maximum loading limit: 23/14 ×...
  • Page 171 Rear wheel: Wheel travel: 232 mm (9.1 in) Wheel type: Electrical system: Cast wheel (YFM70KPSG) Panel wheel (YFM70KDHG, YFM70KDXG, Ignition system: YFM70KPHG, YFM70KPXG) Rim size: Charging system: 12 x 7.5AT AC magneto Front brake: Battery: Type: Model: Disc brake YTX20L-BS Operation: Voltage, capacity: Right hand operation...
  • Page 172 Fuel level warning light: Headlight fuse: LED (YFM70KDHG, YFM70KDXG) 10.0 A (YFM70KDHG, YFM70KDXG) Reverse indicator light: 15.0 A (YFM70KPHG, YFM70KPSG, YFM70KPXG) Signaling system fuse: Coolant temperature warning light: 10.0 A Ignition fuse: EPS warning light: 10.0 A LED (YFM70KPHG, YFM70KPSG, YFM70KPXG) Auxiliary DC jack fuse: Park indicator light: 10.0 A...
  • Page 173 sure level can vary from country. This information, however, will enable the user of the machine to make a better evaluation of the hazard and risk. 10-6...

  • Page 174: Consumer Information

    Record the vehicle identification number and model label information in the spaces provided below for assistance when ordering spare parts from a Yamaha dealer or for reference in case the ATV is stolen. VEHICLE IDENTIFICATION NUMBER: 1. Vehicle identification number (front left side)
  • Page 175 1. Model label 11-2...

  • Page 176: Index

    INDEX Drive lever (YFM70KDXG / YFM70KDHG / YFM70KPXG / YFM70KPHG) ........4-15 Accessories and loading ..........6-6 Drive select lever ............4-18 Accessories, auxiliary jack ...........4-25 Drive select lever and driving in reverse ......6-2 Air filter element, cleaning ..........8-37 Drive select lever safety system cable, adjusting ..8-43 Axle boots ..............8-48 Engine break-in ..............
  • Page 177 Horn switch ..............4-10 Part locations ..............3-1 Identification numbers ..........11-1 Rear brake, adjusting the lever, pedal free play ..8-46 Indicator lights and warning lights ......... 4-2 Rear knuckle pivots, lubricating ........8-52 Instruments, lights and switches ........5-7 Reverse indicator light ...........
  • Page 178 Valve clearance ............8-42 V-belt case drain plug ..........8-41 Vehicle identification number ........11-1 Wheel hub bearings, checking ........8-51 Wheel, installing ............8-65 Wheel, removing ............8-64 12-3...
  • Page 180 EBU26173 WARNING Improper ATV use can result in SEVERE INJURY or DEATH. NEVER USE ALWAYS USE NEVER USE NEVER CARRY AN APPROVED PASSENGERS WITH DRUGS ON PAVED HELMET AND OR ALCOHOL ROADS PROTECTIVE GEAR NEVER ALWAYS operate: • without proper training or instruction. •...

This manual is also suitable for:

Kodiak 700 yfm70kphgKodiak 700 yfm70kpsgKodiak 700 yfm70kdhgKodiak 700 yfm70kpxg

Table of Contents

Save PDF