Table of Contents
Advertisement
6. Remove:
• Oil filter element drain bolt "1"
7. Drain:
• Engine oil
(completely from the oil tank and crankcase)
8. If the oil filter element is also to be replaced,
perform the following procedure.
▼
▼▼▼
▼ ▼▼▼
▼
▼ ▼▼▼
▼
▼ ▼▼▼
▼
a. Remove the oil filter element cover "1" and oil
filter element "2".
b. Check the O-rings "3" and replace them if
they are cracked or damaged.
1
c. Install the new oil filter element and the oil fil-
ter element cover.
Oil filter element cover bolt
10 Nm (1.0 m·kg, 7.2 ft·lb)
▲
▲▲▲
▲ ▲▲▲
▲
▲ ▲▲▲
▲
▲ ▲▲▲
▲
9. Check:
• Engine oil drain bolt gasket
Damage → Replace.
10.Install:
• Engine oil drain bolt (crankcase)
(along with the gasket)
• Engine oil drain bolt (oil tank)
(along with the gasket)
Engine oil drain bolt (crankcase)
23 Nm (2.3 m·kg, 17 ft·lb)
Engine oil drain bolt (oil tank)
19 Nm (1.9 m·kg, 13 ft·lb)
1
▼ ▼▼▼
▼
▼ ▼▼▼
▼
▼▼▼
▲ ▲▲▲
▲
▲ ▲▲▲
▲
▲▲▲
3-11
• Oil filter element drain bolt
(along with the gasket)
Oil filter element drain bolt
10 Nm (1.0 m·kg, 7.2 ft·lb)
11.Fill:
• Oil tank
• Crankcase
(with the specified amount of the recom-
mended engine oil)
Engine oil quantity
Total amount
2.30 L (2.43 US qt, 2.02 Imp.qt)
Without oil filter element replace-
ment
1.75 L (1.85 US qt, 1.54 Imp.qt)
With oil filter element replace-
ment
1.85 L (1.96 US qt, 1.63 Imp.qt)
12.Install:
• Dipstick
• Engine oil filler bolt
Oil filter bolt
12 Nm (1.2 m·kg, 8.7 ft·lb)
13.Start the engine, warm it up for several min-
utes, and then turn it off.
14.Check:
• Engine
(for engine oil leaks)
15.Check:
• Engine oil level
Refer to "CHECKING THE ENGINE OIL
LEVEL" on page 3-9.
16.Check:
• Engine oil pressure
▼
▼▼▼
▼ ▼▼▼
▼
▼ ▼▼▼
▼
▼ ▼▼▼
▼
a. Slightly loosen the oil check bolt "1".
ENGINE
▼ ▼▼▼
▼
▼ ▼▼▼
▼
▼▼▼
1
Advertisement
Chapters
Table of Contents
Troubleshooting
