Table of Contents
Advertisement
1. Thermostat cover
2. Fast idle plunger outlet hose
3. Radiator inlet hose
4. Radiator
5. Radiator outlet hose
6. Water pump breather hose
7. Water pump
A. Install the radiator inlet hose onto the thermostat
cover pipe, making sure that it contacts the cover
and its yellow paint mark is facing outward.
B. Fasten the fast idle plunger outlet hose and the
radiator inlet hose with the plastic band.
C. Install the radiator inlet hose with its white paint
mark facing outward.
D. Position the screw clamp so that its screw can be
tightened from the right side of the vehicle.
E. Install the radiator outlet hose with its white paint
mark facing outward.
F. Install the radiator outlet hose with its yellow paint
mark facing outward.
G. From fast idle plunger
H. Position the screw clamp so that its screw can be
tightened from the right side of the vehicle. Make
sure that the end of the screw clamp does not
protrude past the side of the radiator inlet hose.
I.
Position the screw clamp so that its screw can be
tightened from the right side of the vehicle. Make
sure that the end of the screw clamp does not
protrude past the side of the radiator outlet hose.
COOLING SYSTEM DIAGRAMS
2-36
Advertisement
Chapters
Table of Contents
Troubleshooting
