Table of Contents
Advertisement
EAS26390
CHECKING THE RADIATOR
1. Check:
• Radiator fins
Obstruction → Clean.
Apply compressed air to the rear of the radia-
tor.
Damage → Repair or replace.
TIP
Straighten any flattened fins with a thin, flat-head
screwdriver.
2. Check:
• Radiator hoses
• Radiator pipes
Cracks/damage → Replace.
3. Measure:
• Radiator cap opening pressure
Below the specified pressure → Replace the
radiator cap.
Radiator cap opening pressure
107.9–137.3 kPa (1.1–1.4
kgf/cm², 15.6–19.9 psi)
▼
▼▼▼
▼ ▼▼▼
▼
▼ ▼▼▼
▼
▼ ▼▼▼
▼
a. Install the radiator cap tester "1" and radiator
cap tester adapter "2" to the radiator cap "3".
Radiator cap tester
90890-01325
Mityvac cooling system tester kit
YU-24460-A
Radiator cap tester adapter
90890-01352
Pressure tester adapter
YU-33984
▼ ▼▼▼
▼
▼ ▼▼▼
▼
▼▼▼
6-2
b. Apply the specified pressure for ten seconds
and make sure there is no drop in pressure.
▲
▲▲▲
▲ ▲▲▲
▲
▲ ▲▲▲
▲
▲ ▲▲▲
▲
4. Check:
• Radiator fan
Damage → Replace.
Malfunction → Check and repair.
Refer to "COOLING SYSTEM" on page 8-25.
EAS26400
INSTALLING THE RADIATOR
1. Fill:
• Cooling system
(with the specified amount of the recom-
mended coolant)
Refer to "CHANGING THE COOLANT" on
page 3-16.
2. Check:
• Cooling system
Leaks → Repair or replace any faulty part.
3. Measure:
• Radiator cap opening pressure
Below the specified pressure → Replace the
radiator cap.
Refer to "CHECKING THE RADIATOR" on
page 6-2.
RADIATOR
▲ ▲▲▲
▲
▲ ▲▲▲
▲
▲▲▲
Advertisement
Chapters
Table of Contents
Troubleshooting
