Table of Contents
Advertisement
1. Remove:
• Seat
Refer to "GENERAL CHASSIS" on page 4-1.
2. Remove:
• Air filter case cover "1"
1
3. Remove:
• Wing bolt "1"
• Air filter element "2"
• Air filter element frame "3"
3
4. Clean:
• Air filter element
(with solvent)
EWA13020
Never use low flash point solvents, such as
gasoline, to clean the air filter element. Such
solvents may cause a fire or an explosion.
TIP
After cleaning, gently squeeze the air filter ele-
ment to remove the excess solvent.
ECA13430
NOTICE
Do not twist the air filter element when
squeezing it.
5. Check:
• Air filter element
6. Apply the recommended oil to the entire sur-
2
1
7. Install:
• Air filter element frame
• Air filter element
• Wing bolt
• Air filter case cover
ECA14401
NOTICE
Never operate the engine without the air filter
element installed. Unfiltered air will cause
rapid wear of engine parts and may damage
the engine. Operating the engine without the
air filter element will also affect carburetor
synchronization, leading to poor engine per-
formance and possible overheating.
2
8. Install:
• Seat
EAS2LS1002
CHECKING THE AIR INDUCTION SYSTEM
Refer to "CHECKING THE AIR INDUCTION
SYSTEM" on page 7-13.
EAS21020
CHECKING THE THROTTLE BODY JOINT
1. Check:
• Throttle body joint "1"
3-13
WARNING
Damage → Replace.
face of the air filter element and squeeze out
the excess oil. The air filter element should be
wet but not dripping.
Air filter oil grade
Foam air filter oil
Refer to "GENERAL CHASSIS" on page 4-1.
Cracks/damage → Replace.
ENGINE
Advertisement
Chapters
Table of Contents
Troubleshooting
