Errdisable Recovery - Cisco ME 3400 Command Reference Manual
Ethernet access switch
Hide thumbs
Also See for ME 3400:
- Software configuration manual (1138 pages) ,
- Command reference manual (872 pages) ,
- Hardware installation manual (88 pages)
Table of Contents
Advertisement
errdisable recovery
errdisable recovery
Use the errdisable recovery global configuration command to configure the recover mechanism
variables. Use the no form of this command to return to the default setting.
Although visible in the command-line help strings, the storm-control and unicast-flood keywords are
Note
not supported.
Syntax Description
cause
all
bpduguard
arp-inspection
channel-misconfig
dhcp-rate-limit
gbic-invalid
l2ptguard
link-flap
loopback
pagp-flap
psecure-violation
security-violation
small-frame
udld
unicast-flood
vmps
Cisco ME 3400 Ethernet Access Switch Command Reference
2-110
errdisable recovery {cause {all | arp-inspection | bpduguard | channel-misconfig |
dhcp-rate-limit | gbic-invalid | l2ptguard | link-flap | loopback | pagp-flap |
psecure-violation | security-violation | small-frame | udld |unicast-flood | vmps} | {interval
interval}
no errdisable recovery {cause {all | arp-inspection | bpduguard | channel-misconfig |
dhcp-rate-limit | gbic-invalid | l2ptguard | link-flap | loopback | pagp-flap |
psecure-violation | security-violation | small-frame | udld |unicast-flood | vmps} | {interval
interval}
Enable the error-disabled mechanism to recover from a specific cause.
Enable the timer to recover from all error-disabled causes.
Enable the timer to recover from the bridge protocol data unit (BPDU) guard
error-disabled state.
Enable the timer to recover from the Address Resolution Protocol (ARP)
inspection error-disabled state.
Enable the timer to recover from the EtherChannel misconfiguration
error-disabled state.
Enable the timer to recover from the DHCP snooping error-disabled state.
Enable the timer to recover from an invalid Gigabit Interface Converter
(GBIC) module error-disabled state.
Note
Enable the timer to recover from a Layer 2 protocol tunnel error-disabled
state.
Enable the timer to recover from the link-flap error-disabled state.
Enable the timer to recover from a loopback error-disabled state.
Enable the timer to recover from the Port Aggregation Protocol (PAgP)-flap
error-disabled state.
Enable the timer to recover from a port security violation disabled state.
Enable the timer to recover from an IEEE 802.1x-violation disabled state.
See the
Enable the timer to recover from the UniDirectional Link Detection (UDLD)
error-disabled state.
Enable the timer to recover from the unicast flood disable state.
Enable the timer to recover from the VLAN Membership Policy Server
(VMPS) error-disabled state.
Chapter 2
Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
This error refers to an invalid small form-factor pluggable (SFP)
error-disabled state.
errdisable recovery cause small-frame
command.
OL-9640-10
Advertisement
Table of Contents
