Errdisable Recovery Cause Small-Frame - Cisco Catalyst 3750 Metro Command Reference Manual

Hide thumbs Also See for Catalyst 3750 Metro:

Table of Contents

errdisable recovery cause small-frame

Use the errdisable recovery cause small-frame global configuration command on the switch enable the

recovery timer for ports to be automatically re-enabled after they are error disabled by the arrival of small

frames. Use the no form of this command to return to the default setting.

Syntax Description

This command has no arguments or keywords.

This feature is disabled.

Command Modes

Global configuration

Command History

Usage Guidelines

This command enables the recovery timer for error-disabled ports. You configure the recovery time by

using the errdisable recovery interval interval interface configuration command.

This example shows how to set the recovery timer:

Switch(config)# errdisable recovery cause small-frame

You can verify your setting by entering the show interfaces user EXEC command.

Related Commands

errdisable detect cause small-frame

show interfaces

small-frame violation-rate

Catalyst 3750 Metro Switch Command Reference

errdisable recovery cause small-frame

no errdisable recovery cause small-frame

Modification

This command was introduced.

Catalyst 3750 Metro Switch Cisco IOS Commands

Allows any switch port to be put into the error-disabled

state if an incoming frame is smaller than the configured

minimum size and arrives at the specified rate (threshold).

Displays the interface settings on the switch, including

input and output flow control.

Configures the size for an incoming (small) frame to cause

a port to be put into the error-disabled state.