Logging File - Cisco Catalyst 3750 Metro Command Reference Manual
Hide thumbs
Also See for Catalyst 3750 Metro:
- Product support bulletin (6 pages) ,
- Reference manual (58 pages)
Table of Contents
Advertisement
logging file
logging file
Use the logging file global configuration command to set logging file parameters. Use the no form of
this command to return to the default setting.
Syntax Description
filesystem:filename
max-file-size
min-file-size
severity-level-number
type
Defaults
The minimum file size is 2048 bytes; the maximum file size is 4096 bytes.
The default severity level is 7 (debugging messages and numerically lower levels).
Command Modes
Global configuration
Command History
Release
12.1(14)AX
Catalyst 3750 Metro Switch Command Reference
2-242
logging file filesystem:filename [max-file-size [min-file-size]] [severity-level-number | type]
no logging file filesystem:filename [severity-level-number | type]
Alias for a flash file system. Contains the path and name of the file that
contains the log messages.
The syntax for the local flash file system: flash:
(Optional) Specify the maximum logging file size. The range is 4096 to
2147483647.
(Optional) Specify the minimum logging file size. The range is 1024 to
2147483647.
(Optional) Specify the logging severity level. The range is 0 to 7. See the type
option for the meaning of each level.
(Optional) Specify the logging type. These keywords are valid:
•
•
•
•
•
•
•
•
Modification
This command was introduced.
Chapter 2
emergencies—System is unusable (severity 0).
alerts—Immediate action needed (severity 1).
critical—Critical conditions (severity 2).
errors—Error conditions (severity 3).
warnings—Warning conditions (severity 4).
notifications—Normal but significant messages (severity 5).
information—Information messages (severity 6).
debugging—Debugging messages (severity 7).
Catalyst 3750 Metro Switch Cisco IOS Commands
OL-9645-10
Advertisement
Table of Contents
