Name (Mst) - Cisco 300 Series Cli Manual

Stackable managed switches

Hide thumbs Also See for 300 Series:

Table of Contents

Spanning-Tree Commands

OL-32830-01 Command Line Interface Reference Guide

vlan-range—The specified range of VLANs is added to the existing ones. To

specify a range, use a hyphen. To specify a series, use a comma. (Range:

Default Configuration

All VLANs are mapped to the common and internal spanning tree (CIST) instance

(instance 0).

Command Mode

MST Configuration mode

User Guidelines

All VLANs that are not explicitly mapped to an MST instance are mapped to the

common and internal spanning tree (CIST) instance (instance 0) and cannot be

unmapped from the CIST.

For two or more devices to be in the same MST region, they must have the same

VLAN mapping, the same configuration revision number, and the same name.

The following example maps VLANs 10-20 to MST instance 1.

switchxxxxxx(config)#

switchxxxxxx(config-mst)#

46.24 name (MST)

Use the name MST Configuration mode command to define the MST instance

name. Use the no form of this command to restore the default setting.

string—Specifies the MST instance name. (Length: 1–32 characters)

spanning-tree mst configuration