Table of Contents
Advertisement
20
When the Setup Window
appears, and the status bar
reaches 100%, the remaining
drivers will be copied.
21
Click OK.
22
All the drivers have been installed. Now you can print and scan.
If you want to install PaperPort
(See Installing the Brother Software in this Chapter.)
Using a USB Cable to Connect the MFC to the
PC (Using Windows
2000 Professional Only)
To install the software using Windows
Administrator.
Before you can connect the MFC to your computer, you must purchase a USB
cable that is no longer than 6 feet ( 1.8 meters).
Notice to Computer Users
A small filter core and cable tie are enclosed in a vinyl bag with your MFC. PLEASE SAVE
THESE PARTS. You will need them in the future if you connect the MFC to a Computer. For
optimal performance, use a USB Cable with the enclosed Filter core and Cable tie.
When you use a Computer with your MFC, please attach the enclosed Filter core to a USB Cable.
1
Attach the cable tie 50mm or less from the end of the USB Cable that will be connected to the
MFC.
90
Chapter 13
®
or Multi-Function Link
®
98, 98SE and Windows
IMPORTANT
®
2000 Professional, you must be logged on as the
®
Pro, go to the CD section.
®
Advertisement
Table of Contents
