Table of Contents
Advertisement
User-Friendly Programming
We have designed your Multi-Function Centre with on-screen programming. User-friendly
programming helps you take full advantage of all the functions your MFC has to offer. See Using
This Manual.
Since your programming is done on the LCD, we have created step-by-step on-screen prompts to
help you. All you need to do is follow the prompts as they guide you through the function menu
selections, programming options and settings.
A complete list of the function selections, options, and settings that are available is provided in the
appendix of this manual. (See Menu Selection Table in Chapter 23.)
Menu Mode
After pressing Menu key the following options are available.
Then press 1 for Fax Menu—OR—press 2 for Printer Menu—OR—press 3 for Copy Menu
—OR—press 4 for Video Menu—OR—(For MFC-840 only) press 5 for PhotoCapture Centre
Menu.
When you enter the Menu Mode, your MFC displays a list of Level One Menus from which you can
choose. These menu options appear one after the other on the display. Select an option by pressing
Set when the option appears on the LCD.
You can "scroll" more quickly through options by pressing
selection, press Set. (Use
Both arrow keys show all options, in the opposite order.)
When you finish selection, the screen displays ACCEPTED.
If you want to exit the Menu Mode, press Stop .
Alternating Displays
The LCD sometimes alternates between the currently
selected option, and a help message giving brief
instructions about how to proceed. The display you'll
probably see most often is shown below, showing you that
when you place a document in the feeder, you can either
dial a number to send it as a fax or press the Mono Copy
or Colour Copy key to make a copy of the document.
iii
to scroll backward if you passed your choice or to save key strokes.
. When the screen displays your
FAX: NO. & START
COPY: PRESS COPY
™
Advertisement
Table of Contents
