Table of Contents
Advertisement
Memory Full Message
If the memory becomes full while you're making copies, the screen displays
followed by
If you were scanning the first page of your document, press Stop to cancel the job and restart to
make a single copy. If you were scanning a subsequent page, press Mono Copy or Colour Copy
to print the pages already scanned—OR—Press Stop to cancel.
You'll need to clear some fax messages to make some additional memory available before you can
continue.
To gain extra memory, you can turn off Fax Storage in Chapter 9— OR —Print fax
messages in memory in Chapter 3.
Temporary Copy Setting
You can quickly improve the copy quality by using the Enlarge/Reduce, Quality and Options
keys. These settings are temporary, and the MFC returns to its default settings when you finish
copying. You might want to try different combinations of settings to see which best suits your needs.
After you press Mono Copy or Colour Copy, you can use Enlarge/Reduce,
Quality and Options to try different combinations of settings for best results.
Making Enlarged or Reduced Copies (Temporary Setting)
1
Insert the document face down in the feeder.
2
Press Enlarge/Reduce. The screen displays
3
Press
or
to choose an enlargement or reduction
ratio.
You can reduce to 93%, 87%, 75%, 50% or 25% of the original size
—OR—
You can enlarge to 120%, 125%, 150%, 200% or 400%
—OR—
You can select MANUAL and press Set, then use the dial pad to enter an enlargement or
reduction ratio between 25% and 400%. For example, press 5, 3 to enter 53%.
4
Press Set.
5
Press Mono Copy or Colour Copy.
6
Using the dial pad, enter the number of copies—OR—Keep the default (01).
7
Press Set.
MEMORY FULL P.02
COPY TO COPY
STOP TO ABORT
ELG/RDC:100%
THEN COPY OR SET
Making Copies
53
Advertisement
Table of Contents
