Table of Contents
Advertisement
Chain Dialling
You can store very long dialling sequences by dividing them and setting them up as One Touch and
Speed Dial numbers. Then while dialling, you can combine two or more One Touch and/or Speed
Dial numbers and even include manual dialling using the dial pad. You can use these numbers in any
combination. The combined number will be dialled, in the order you entered it, as soon as you press
Start.
For example:
You store "555" on One Touch Dial key 01 and "7000" on One Touch Dial key 02. If you press
One Touch 01, 02 and Start, you can dial "555-7000". To temporarily change a number, you can
substitute part of the number with manual dialling using the dial pad. So, if you press One Touch
01 and press 7001 using the dial pad, you can dial "555-7001".
Using access codes is easy. Sometimes you may want to choose from the among several long
distance carriers when you make a call; rates may vary depending upon the time and destination.
To take advantage of low rates, you can store the access codes or long-distance carriers as One
Touch and Speed Dial numbers.
Call Reservation with an External Telephone (Only for MFC-830)
If you connect an external telephone to the unit, you can send a fax and then talk to the recipient
using the Call Reservation feature. After your fax has been printed on the receiving end, the
receiving fax machine will ring as if it were receiving a telephone call. When the recipient picks up
the handset, your fax machine will ring. Then you can pick up your handset of the external telephone
and press Tel, then start a conversation.
For further information on how to use this function, See chap.6.
Tone/Pulse
If you have pulse dialling service, but need to send tone signals (for telephone banking, for example),
follow the directions below. If you have touch tone service, you do not need this feature to send tone
signals.
1
Lift the handset.
2
Press #. Any digits dialled after this sends tone signals.
3
When you hang up, the machine returns to pulse dialling service.
Fax/Tel (F/T) Mode
When you share one line for your telephone and fax machine, in the
Fax/Tel (F/T) Mode, the fax machine can determine whether an incoming call is a fax or a telephone
call. (See Select Receive Mode in Chapter 3.)
Tel Key
Only for MFC-830
This key is used to enter into a telephone conversation having picked up the handset of an external
telephone in F/T pseudo-ringing etc.
Only for MFC-840
If you press Tel when you are talking lifting the handset with the other end, you can hear the other
end from machine's monitor speaker, but the other end cannot hear you.
Telephone (Voice) Operation
31
Advertisement
Table of Contents
