Table of Contents
Advertisement
Changing the TX Lock Password
1
Press Menu, 1, 0, 2.
2
Press
or
to choose SET PASSWORD.
3
Press Set.
The screen prompts you to enter the old password.
4
Enter the current password.
5
Press Set.
The screen prompts you to enter the new password.
6
Enter a 4-digit number as a new password.
7
Press Set.
The screen prompts you to re-enter the new password.
8
Enter the new password again and press Set.
9
Press Stop to exit.
Switching TX Lock ON
1
Press Menu, 1, 0, 2. The screen displays
2
Press
or
to choose SET TX LOCK.
3
Press Set. The screen prompts you to enter the password.
4
Enter a 4-digit password, followed by Set.
This is the same as the security password of your
machine already stored.
The screen displays ACCEPTED for 2 seconds, followed by TX LOCK MODE - TX Lock is now
switched ON.
If the password you enter at Step 4 is incorrect, the screen would display
WRONG PASSWORD . After 2 seconds the display will then return to normal
(displaying the date & time). You must then start from Step 1 to set TX Lock.
Switching OFF TX Lock
1
When TX Lock is switched ON. press Menu.
The screen Prompts you to enter the password,
followed by Set.
2
Enter a 4-digit password and press Set.
The screen displays ACCEPTED, then after 2 seconds the display reverts to normal. TX Lock
is now switched OFF.
If the password you enter at Step 2 is incorrect, the screen would display
WRONG PASSWORD . After 2 seconds the display will then return to displaying
TX LOCK MODE . You must then start from Step 1 to switch OFF TX Lock.
If you forget the TX Lock password, please contact your Brother dealer for assistance.
SET TX LOCK
SET PASSWORD
OLD PASSWD:XXXX
ENTER & SET
NEW PASSWD:XXXX
ENTER & SET
VERIFY:XXXX
ENTER & SET
SET TX LOCK
SET PASSWORD
PASSWORD:XXXX
ENTER & SET
PASSWORD:XXXX
ENTER & SET
Advanced Sending
41
Advertisement
Table of Contents
