Table of Contents
Advertisement
Quality
Select the print quality. The print quality and speed are related. Higher quality takes a longer time to
print.
Draft:
300 x 150 dpi. The fastest print mode (approximately two to four times
faster than normal mode) and gives lower ink consumption. Use this
mode to print large volume documents or a document for proofing.
Normal:
300 x 300 dpi. Recommended mode for ordinary printouts. Good print
quality with comfortable printing speed.
Fine:
600 x 600 dpi. Better print quality than normal and faster print speed
than Super Fine.
Super Fine:
1200 x 1200 dpi. Use this mode to print precise images such as
photographs. Since the print data is much larger than normal mode,
processing time, data transfer time, and printing time will be longer.
Media
Select the media (type of paper). The MFC changes the way it places dots depending on the selected
media type. To get the best print output, make sure to select the correct media type.
Selecting media type changes the print quality selection to the most suitable one as listed below. We
recommend that you print with the preset quality for best printing result.
Paper Type
Plain Paper
Ink Jet Paper
(Coated Paper)
Glossy Paper
Photo Graphic Paper
Transparency
Transparency (mirror)
Use only genuine Brother Ink Jet Paper (Coated Paper), Glossy Paper, or
Transparencies to get the best print quality. Non-Brother special paper may not
produce the best quality.
Suitable print quality
Normal
Fine
Super Fine
Super Fine
Normal
Normal
Printer Driver Settings
109
Advertisement
Table of Contents
