Show Platform Tcam C - Cisco ME 3400 Command Reference Manual
Ethernet access switch
Hide thumbs
Also See for ME 3400:
- Software configuration manual (1138 pages) ,
- Command reference manual (872 pages) ,
- Hardware installation manual (88 pages)
Table of Contents
Advertisement
Appendix C
Cisco ME 3400 Ethernet Access Switch Show Platform Commands
table {acl | all | equal-cost-route
| ipv6 {acl | qos | secondary}
local | mac-address | qos |
secondary | station | vlan-list}
usage
[[asic number [detail [invalid]] |
[index number [detail [invalid]] |
invalid | num number [detail
[invalid]] | invalid] | [invalid] |
[num number [detail [invalid]] |
invalid]]
| begin
| exclude
| include
expression
Though visible in the command-line help strings, the ipv6, multicast-expansion and usage keywords
Note
are not supported.
Command Modes
Privileged EXEC
Command History
Release
12.2(25)EX
OL-9640-10
Display lookup and forwarding table information. The keywords
have these meanings:
acl—Display the access-control list (ACL) table.
•
all—Display all the TCAM tables.
•
equal-cost-route—Display the equal-cost-route table.
•
local—Display the local table.
•
mac-address—Display the MAC-address table.
•
•
qos—Display the QoS table.
•
secondary—Display the secondary table.
station—Display the station table.
•
vlan-list—Display the VLAN list table.
•
Display the CAM and forwarding table usage.
Display information. The keywords have these meanings:
asic number—Display information for the specified ASIC
•
device ID. The range is 0 to 15.
detail [invalid]—(Optional) Display valid or invalid details.
•
index number—(Optional) Display information for the
•
specified TCAM table index. The range is 0 to 32768.
num number—(Optional) Display information for the
•
specified TCAM table number. The range is 0 to 32768.
(Optional) Display begins with the line that matches the
expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified
expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Cisco ME 3400 Ethernet Access Switch Command Reference
show platform tcam
C-45
Advertisement
Table of Contents
