Clear Pagp - Cisco ME 3400 Command Reference Manual

Ethernet access switch

Hide thumbs Also See for ME 3400:

Table of Contents

clear pagp

Use the clear pagp privileged EXEC command to clear Port Aggregation Protocol (PAgP)

channel-group information.

PAgP is available only on network node interfaces (NNIs) enhanced network interfaces (ENIs).

Syntax Description

channel-group-number

No default is defined.

Command Modes

Privileged EXEC

Command History

Usage Guidelines

You can clear all counters by using the clear pagp counters command, or you can clear only the counters

for the specified channel group by using the clear pagp channel-group-number counters command.

This example shows how to clear all channel-group information:

Switch# clear pagp counters

This example shows how to clear PAgP traffic counters for group 10:

Switch# clear pagp 10 counters

You can verify that information was deleted by entering the show pagp privileged EXEC command.

Related Commands

Cisco ME 3400 Ethernet Access Switch Command Reference

clear pagp {channel-group-number counters | counters}

(Optional) Channel group number. The range is 1 to 48.

Clear traffic counters.

Modification

This command was introduced.

Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands

Displays PAgP channel-group information.