Show Ipv6 Route Updated - Cisco ME 3400 Command Reference Manual

Ethernet access switch

Hide thumbs Also See for ME 3400:

Table of Contents

show ipv6 route updated

Use the show ipv6 route updated user EXEC command to display the current contents of the IPv6

routing table.

Syntax Description

Command Modes

Privileged EXEC

Command History

Usage Guidelines

Use the show ipv6 route privileged EXEC command to display the current contents of the IPv6 routing

Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output

do not appear, but the lines that contain Output appear.

Cisco ME 3400 Ethernet Access Switch Command Reference

show ipv6 route [protocol] updated [boot-up] {hh:mm | day{month [hh:mm]} [{hh:mm |

day{month [hh:mm]}] [ | {begin | exclude | include} expression]

(Optional) Display routes for the specified routing protocol. You can enter

any of these keywords:

or display routes for the specified type of route. You can enter any of these

Display the current contents of the IPv6 routing table.

Enter the time as a 2-digit number for a 24-hour clock. Make sure to use the

colons (:). For example, enter 13:32

Enter the day of the month. The range is from 1 to 31.

Enter the month in upper case or lower case letters. You can enter the full

name of the month, such as January or august, or the first three letters of the

month, such as jan or Aug.

(Optional) Display begins with the line that matches the expression.

(Optional) Display excludes lines that match the expression.

(Optional) Display includes lines that match the specified expression.

Expression in the output to use as a reference point.

Modification

This command was introduced.

Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands

interface interface id