Cisco ME 3400 Command Reference Manual page 516

Ethernet access switch

Hide thumbs Also See for ME 3400:

Table of Contents

show ip verify source

This is an example of output on an interface on which IP source guard is disabled:

Switch> show ip verify source gigabitethernet0/6

IP source guard is not configured on the interface gi0/6.

Related Commands

ip verify source

Cisco ME 3400 Ethernet Access Switch Command Reference

On the Fast Ethernet 0/4 interface, IP source guard with source IP and MAC address filtering is

enabled, and static IP source bindings are configured on VLANs 10 and 11. For VLANs 12 to 20,

the default port ACL is applied on the interface for the VLANs on which IP source guard is not

On the Fast Ethernet 0/5 interface, IP source guard with source IP and MAC address filtering is

enabled and configured with a static IP binding, but port security is disabled. The switch cannot

filter source MAC addresses.

Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands

Enables IP source guard on an interface.