Cisco ME 3400 Command Reference Manual page 402

Ethernet access switch

Hide thumbs Also See for ME 3400:

Table of Contents

service-policy (interface configuration)

This example shows how to apply plcmap1 as an output policy map:

Switch(config)# interface gigabitethernet0/1

Switch(config-if)# service-policy output plcmap1

This example shows how to remove plcmap2 from the port:

Switch(config)# interface gigabitethernet0/2

Switch(config-if)# no service-policy output plcmap2

You can verify your settings by entering the show running-config privileged EXEC command.

Related Commands

show policy-map

interface [interface-id]

show running-config

Cisco ME 3400 Ethernet Access Switch Command Reference

Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands

Creates or modifies a policy map that can be attached to multiple ports to

specify a service policy.

Displays quality of service (QoS) policy maps.

Displays policy maps configured on the specified interface or on all

Displays the operating configuration.