Table of Contents
Advertisement
Remote Retrieval
You can also dial into your machine from a remote location to switch this feature on, or to change
the number you want your faxes forwarding to.
Changing the Remote Access Code
Enter your Remote Access Code when the fax machine picks up your call, so you can access features
remotely. The access code is preset to 1 5 9
1
Press Menu, 1, 7, 3.
2
Enter a three-digit number from 000 to 998, and press Set.
The
cannot be changed. Do not use the same digits that appear in your Remote Activation or
Deactivation Code.
3
Press Stop to exit.
Using Your Remote Access Code
To receive faxes at your location, you must call from a fax machine using touch tone. For
convenience, you can retrieve faxes from a touch tone phone by having them sent to a fax machine.
For example, if your hotel room does not have a fax machine, you can enter the number of the fax
machine at the hotel's Front Desk.
1
Dial your fax number from a touch tone phone.
2
When your fax machine answers and beeps, immediately enter your Remote Access Code (The
factory setting is 1 5 9
3
The fax machine signals the kinds of messages received:
1 long beep — Fax message(s)
No long beep — No messages
4
The fax machine prompts you with two short beeps to enter a command. If you wait longer than
30 seconds to enter a command, the machine hangs up. If you enter an invalid command, the
machine beeps three times.
5
Press 9 0 to reset the machine when you finish.
6
Hang up.
48
Chapter 9
, but you can change this.
).
Advertisement
Table of Contents
