Table of Contents
Advertisement
Configuring the Cisco Unified IP Phone to use HTTP/HTTPS Protocols
Configuring the Cisco Unified IP Phone to use HTTP/HTTPS
Protocols
The Cisco Unified IP Phone can be configured to use:
•
•
Device Information
The Device Information area on a phone's web page displays device settings and related information for
the phone.
To display the Device Information area, access the web page for the phone as described in the
the Web Page for a Phone, page
Table 7-1
Device Information Area Items
Item
MAC Address
Host Name
Phone DN
App Load ID
Boot Load ID
Version
Expansion Module 1
Expansion Module 2
Hardware Revision
Serial Number
Model Number
Message Waiting
UDI
Time
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
7-4
The HTTPS protocol only—Phone web access uses https://IP_address
The HTTP or HTTPS protocols—Phone web access uses http://IP_address or https://IP_address
Table 7-1
describes these items.
Description
Media Access Control (MAC) address of the phone
Unique, fixed name that is automatically assigned to the phone based on the MAC address
Directory number assigned to the phone
Identifier of the firmware running on the phone
Identifier of the factory-installed load running on the phone
Version of the firmware running on the phone
Phone load ID for the first Cisco Unified IP Phone Expansion Module, if connected to the phone
Phone load ID for the second Cisco Unified IP Phone Expansion Module, if connected to the phone
Revision value of the phone hardware
Serial number of the phone
Model number of the phone
Indicates if there is a voice message waiting on any line for this phone
Displays the following Cisco Unique Device Identifier (UDI) information about the phone:
Device Type—Indicates hardware type. For example, phone displays for all phone models
•
Device Description—Displays the name of the phone associated with the indicated model type
•
•
Product Identifier—Specifies the phone model
Version Identifier—Represents the hardware version of the phone
•
The Version Identifier field might display a blank screen if the user is using an older model Cisco
Unified IP Phone, because the hardware does not provide this information.
Serial Number—Displays the unique serial number of the phone
•
Time obtained from the Date/Time Group in Cisco Unified Communications Manager to which the
phone belongs
Chapter 7
7-2, and then click the Device Information hyperlink.
Monitoring the Cisco Unified IP Phones Remotely
Accessing
OL-23091-01
Advertisement
Table of Contents
Troubleshooting
