hit counter script

Cisco IP Phone Administration Manual page 169

Unified ip phone for cisco unified communications manager 8.6 (sccp and sip)
Hide thumbs Also See for IP Phone:
Table of Contents

Advertisement

Chapter 7
Monitoring the Cisco Unified IP Phones Remotely
Table 7-2
Network Configuration Area Items (continued)
Item
SW Port Configuration
PC Port Configuration
TFTP Server 2
User Locale
Network Locale
Headset Enabled
User Locale Version
Network Locale Version
PC Port Disabled
Speaker Enabled
GARP Enabled
Video Capability Enabled
Voice VLAN Enabled
Auto Line Select
OL-23091-01
Description
Speed and duplex of the switch port, where:
A—Auto Negotiate
10H—10-BaseT/half duplex
10F—10-BaseT/full duplex
100H—100-BaseT/half duplex
100F—100-BaseT/full duplex
No Link—No connection to the switch port
Speed and duplex of the switch port, where:
A—Auto Negotiate
10H—10-BaseT/half duplex
10F—10-BaseT/full duplex
100H—100-BaseT/half duplex
100F—100-BaseT/full duplex
No Link—No connection to the PC port
To configure the setting on multiple phones simultaneously, configure the Remote Port
Configuration in the Enterprise Phone Configuration (System > Enterprise Phone
Configuration).
Note
If the ports are configured for Remote Port Configuration in Unified CM, the data
cannot be changed on the phone.
Backup TFTP server that the phone uses if the primary TFTP server is unavailable.
User locale associated with the phone user. Identifies a set of detailed information to
support users, including language, font, date and time formatting, and alphanumeric
keyboard text information.
Network locale associated with the phone user. Identifies a set of detailed information to
support the phone in a specific location, including definitions of the tones and cadences
used by the phone.
Indicates whether the Headset button is enabled on the phone.
Version of the user locale loaded on the phone.
Version of the network locale loaded on the phone.
Indicates whether the PC port on the phone is enabled or disabled.
Indicates whether the speakerphone is enabled on the phone.
Indicates whether the phone learns MAC addresses from Gratuitous ARP (GARP)
responses.
Indicates whether the phone can participate in video calls when connected to an
appropriately equipped PC.
Indicates whether the phone allows a device attached to the PC port to access the Voice
VLAN.
Indicates whether the phone shifts the call focus to incoming calls on all lines.
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
Network Configuration
7-7

Advertisement

Table of Contents
loading

This manual is also suitable for:

7962g7942g7961g7961g-ge7941g7941g-ge

Table of Contents