Table of Contents
Advertisement
Chapter 5
Configuring Features, Templates, Services, and Users
Table 5-1
Telephony Features for the Cisco Unified IP Phone (continued)
Feature
Intercom
Join/Select
Join Across
Lines/Select
Line select
Line select for voice
messages
OL-23091-01
Description
Allows users to place and receive intercom calls
using programmable phone buttons. You can
configure intercom line buttons to:
Directly dial a specific intercom extension.
•
Initiate an intercom call and then prompt the
•
user to enter a valid intercom number.
Note
If your user logs into the same phone on a
daily basis using their Cisco Extension
Mobility profile, assign the phone button
template that contains intercom
information to their profile, and assign the
phone as the default intercom device for
the intercom line.
Allows a user to join two or more calls that are on
one line to create a conference call and remain on
the call.
Allows users to apply the Join feature to calls that
are on multiple phone lines.
If this feature is disabled (default), then the ringing
line is selected. When enabled, the primary line is
picked up even if a call is ringing on another line.
The user must manually select the other line.
This feature can also be enabled or
Note
disabled for Extension Mobility.
When disabled (default), pressing the Messages
button selects the line that has a voice message. If
more than one line has voice mail, then the first
available line is selected. When enabled, the
primary line is always used to retrieve voice
messages.
This feature can also be enabled or
Note
disabled for Extension Mobility.
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
Telephony Features Available for the Cisco Unified IP Phone
Configuration Reference
Cisco Unified Communications Manager
Feature and Services Guide, Intercom.
For more information:
See
Configuring Softkey Templates,
•
page
5-27.
•
See Cisco Unified Communications
Manager System Guide,
Phones.
For more information:
See the
Configuring Softkey Templates,
•
page
5-27.
See Cisco Unified Communications
•
Manager System Guide,
Phones.
For more information, see the option "Always
use prime line" in the following chapters of
Cisco Unified Communications Manager
Administration Guide:
Device Profile Configuration
•
Common Phone Profile Configuration
•
Cisco Unified IP Phone Configuration
•
For more information, see the option "Always
use prime line for voice message" in the
following chapters of Cisco Unified
Communications Manager Administration
Guide:
Device Profile Configuration
•
Common Phone Profile Configuration
•
Cisco Unified IP Phone Configuration
•
Cisco Unified IP
Cisco Unified IP
5-13
Advertisement
Table of Contents
Troubleshooting
