hit counter script

Cisco IP Phone Administration Manual page 183

Unified ip phone for cisco unified communications manager 8.6 (sccp and sip)
Hide thumbs Also See for IP Phone:
Table of Contents

Advertisement

Chapter 8
Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phones
Table 8-2
Status Messages on the Cisco Unified IP Phone (continued)
Message
No DNS server IP
No Trust List installed
Programming Error
Successful—MD5
TFTP access error
TFTP error
TFTP file not found
TFTP timeout
Timed Out
OL-23091-01
Description
A name was specified but DHCP or static
IP configuration did not specify a DNS
server address.
Certificate Trust List (CTL) file or
Identity Trust List (ITL) file is not
installed in the phone.
The phone failed during programming.
The phone attempted an 802.1X
transaction and authentication achieved.
TFTP server is pointing to a directory
that does not exist.
The phone does not recognize an error
code provided by the TFTP server.
The requested load file (.bin) was not
found in the TFTPPath directory.
TFTP server did not respond.
Supplicant attempted 802.1X transaction
but timed out to due the absence of an
authenticator.
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
Possible Explanation and Action
If the phone has a static IP address, verify that the
DNS server has been configured. See
Configuration Menu, page 4-5
If you are using DHCP, the DHCP server has not
provided a DNS server. Check the DHCP server
configuration.
Occurs if the CTL file is not configured on the Cisco
Unified Communications Manager and the Cisco
Unified Communications Manager does not support
security by default.
For more information about the CTL file or ITL file,
see Cisco Unified Communications Manager Security
Guide.
Attempt to resolve this error by power cycling the
phone. If the problem persists, contact Cisco
technical support for additional assistance.
The phone achieved 802.1X authentication.
If you are using DHCP, verify that the DHCP
server is pointing to the correct TFTP server.
If you are using static IP addresses, check
configuration of TFTP server. See
Configuration Menu, page 4-5
assigning a TFTP server.
Contact the Cisco TAC.
Check the load ID assigned to the phone (from Cisco
Unified Communications Manager, choose Device >
Phone). Verify that the TFTPPath directory contains
a .bin file with this load ID as the name.
Network is busy—The errors should resolve
themselves when the network load reduces.
No network connectivity between the TFTP
server and the phone—Verify the network
connections.
TFTP server is down—Check configuration of
TFTP server.
Authentication typically times out if 802.1X is not
configured on the switch.
Status Menu
Network
for details.
Network
for details on
8-7

Advertisement

Table of Contents
loading

This manual is also suitable for:

7962g7942g7961g7961g-ge7941g7941g-ge

Table of Contents