Table of Contents
Advertisement
Chapter 5
Configuring Features, Templates, Services, and Users
Table 5-2
Configuration Window
Enterprise Phone
Configuration window
Common Phone Profile
window
Phone Configuration
window
OL-23091-01
Configuration parameters for Cisco Unified IP Phones
Path
System > Enterprise Phone
Configuration
Device > Device Settings >
Common Phone Profile
Device > Phone; Product
Specific Configuration portion
of window
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
Configuring Product Specific Configuration Parameters
Parameters
You can set the following parameters
in any of the three configuration
windows:
Settings Access
•
Video Capabilities
•
Web Access
•
•
Load Server
•
RTCP
Peer Firmware Sharing
•
Cisco Discovery Protocol (CDP):
•
Switch Port
Cisco Discovery Protocol (CDP):
•
PC Port
Link Layer Discovery Protocol -
•
Media Endpoint Discover
(LLDP-MED): Switch Port
Link Layer Discovery Protocol
•
(LLDP): PC Port
IPv6 Load Server
•
•
802.1x Authentication
Switch Port Remote Configuration
•
PC Port Remote Configuration
•
Automatic Port Synchronization
•
When you set the parameters, select
the Override Common Settings check
box for each setting you wish to
update. If you do not check this box,
the corresponding parameter setting
does not take effect. If you set the
parameters at the three configuration
windows, the setting takes precedence
in the following order:
Phone Configuration window
•
Common Phone Profile window
•
Enterprise Phone Configuration
•
window
5-23
Advertisement
Table of Contents
Troubleshooting
