Table of Contents
Advertisement
Appendix E
Basic Phone Administration Steps
b.
c.
d.
e.
f.
Configure line settings:
Step 2
a.
b.
c.
OL-23091-01
–
Calling Search Space—From the drop-down list box, choose the appropriate calling search
space (CSS). A calling search space comprises a collection of partitions (analogous to a
collection of available phone books) that are searched to determine how a dialed number should
be routed. The calling search space for the device and the calling search space for the directory
number get used together. The directory number CSS takes precedence over the device CSS.
Note
Calling Search Spaces are defined on the Calling Search Space Configuration window
of Cisco Unified Communications Manager Administration (Calling routing > Class
of Control> Calling Search Space). You can use the search fields in conjunction with
the Find button to find all configured Calling Search Spaces and their current settings.
Location—Choose the appropriate location for this Cisco Unified IP Phone.
–
Owner User ID—From the drop-down menu, choose the user ID of the assigned phone user.
–
In the Protocol Specific Information pane of this window, choose a Device Security Profile from the
drop-down list. To enable security features for a phone, you must configure a new security profile
for the device type and protocol and apply it to the phone. If the phone does not support security,
choose a non-secure profile.
To identify the settings that are contained in the profile, choose System > Security Profile > Phone
Security Profile.
The security profile chosen should be based on the overall security strategy of the company.
Note
(For SIP Phones only) Also in the Protocol Specific Information pane of this window, choose the
applicable SIP Profile from the drop-down list.
In the Extension Information pane of this window, check the Enable Extension Mobility box if this
phone supports Cisco Extension Mobility.
In the Product Specific Configuration Layout pane of this window, enable the Video Capabilities
field if this field appears on your window.
Click Save.
On the Phone Configuration window, click Line 1 on the left pane of the window. The Directory
Number Configuration window appears.
In the Directory Number field, enter a valid number that can be dialed.
Note
This field should contain the same number that appears in the Telephone Number field
on the User Configuration window.
Example: 26640 is the directory number of user John Doe in the example above.
From the Route Partition drop-down list, choose the partition to which the directory number
belongs. If you do not want to restrict access to the directory number, choose <None> for the
partition.
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
Configuring the Phone
E-5
Advertisement
Table of Contents
Troubleshooting
