Show Ip Dhcp Snooping; Show Ip Dhcp Snooping Binding - Cisco 3020 - Catalyst Blade Switch Command Reference Manual
Cisco catalyst blade switch 3020 for hp command reference, rel. 12.2(25)sef1
Hide thumbs
Also See for 3020 - Cisco Catalyst Blade Switch:
- Configuration manual (712 pages) ,
- Release note (54 pages) ,
- Getting started manual (37 pages)
Table of Contents
Advertisement
show ip dhcp snooping
show ip dhcp snooping
Use the show ip dhcp snooping user EXEC command to display the DHCP snooping configuration.
Syntax Description
| begin
| exclude
| include
expression
Command Modes
User EXEC
Command History
Release
12.2(25)SEF
Usage Guidelines
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show ip dhcp snooping command:
Switch> show ip dhcp snooping
Switch DHCP snooping is enabled
DHCP snooping is configured on following VLANs:
40-42
Insertion of option 82 is enabled
Option 82 on untrusted port is allowed
Verification of hwaddr field is enabled
Interface
------------------------
GigabitEthernet0/1
GigabitEthernet0/2
Related Commands
Command
show ip dhcp snooping binding
Cisco Catalyst Blade Switch 3020 for HP Command Reference
2-324
show ip dhcp snooping [ | {begin | exclude | include} expression]
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
circuit-id format: vlan-mod-port
remote-id format: string
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands
Trusted
Rate limit (pps)
-------
----------------
yes
unlimited
yes
unlimited
Description
Displays the DHCP snooping binding information.
OL-8916-01
Advertisement
Table of Contents
