Debug Interface - Cisco 3020 - Catalyst Blade Switch Command Reference Manual
Cisco catalyst blade switch 3020 for hp command reference, rel. 12.2(25)sef1
Hide thumbs
Also See for 3020 - Cisco Catalyst Blade Switch:
- Configuration manual (712 pages) ,
- Release note (54 pages) ,
- Getting started manual (37 pages)
Table of Contents
Advertisement
debug interface
debug interface
Use the debug interface privileged EXEC command to enable debugging of interface-related activities.
Use the no form of this command to disable debugging.
Syntax Description
interface-id
null interface-number
port-channel
port-channel-number
vlan vlan-id
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
Release
12.2(25)SEF
Usage Guidelines
If you do not specify a keyword, all debug messages appear.
The undebug interface command is the same as the no debug interface command.
Cisco Catalyst Blade Switch 3020 for HP Command Reference
B-12
debug interface {interface-id | null interface-number | port-channel port-channel-number |
vlan vlan-id}
no debug interface {interface-id | null interface-number | port-channel port-channel-number |
vlan vlan-id}
Display debug messages for the specified physical port, identified by type
switch number/module number/ port, for example gigabitethernet 0/2.
Display debug messages for null interfaces. The interface-number is always
0.
Display debug messages for the specified EtherChannel port-channel
interface. The port-channel-number range is 1 to 48.
Display debug messages for the specified VLAN. The vlan-id range is 1 to
4094.
Modification
This command was introduced.
Appendix B
Cisco Catalyst Blade Switch 3020 for HP Debug Commands
OL-8916-01
Advertisement
Table of Contents
