debug sw-vlan
debug sw-vlan
Use the debug sw-vlan privileged EXEC command to enable debugging of VLAN manager activities.
Use the no form of this command to disable debugging.
Syntax Description
badpmcookies
cfg-vlan {bootup | cli}
events
ifs
management
mapping
notification
packets
redundancy
registries
vtp
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
Release
12.2(25)SEF
Usage Guidelines
The undebug sw-vlan command is the same as the no debug sw-vlan command.
Cisco Catalyst Blade Switch 3020 for HP Command Reference
B-70
debug sw-vlan {badpmcookies | cfg-vlan {bootup | cli} | events | ifs | management | mapping |
notification | packets | redundancy | registries | vtp}
no debug sw-vlan {badpmcookies | cfg-vlan {bootup | cli} | events | ifs | management | mapping
| notification | packets | redundancy | registries | vtp}
Display debug messages for VLAN manager incidents of bad port manager
cookies.
Display config-vlan debug messages. The keywords have these meanings:
•
•
Display debug messages for VLAN manager events.
See the
Display debug messages for VLAN manager management of internal
VLANs.
Display debug messages for VLAN mapping.
See the
Display debug messages for packet handling and encapsulation processes.
Display debug messages for VTP VLAN redundancy.
Display debug messages for VLAN manager registries.
See the
Modification
This command was introduced.
Appendix B
Cisco Catalyst Blade Switch 3020 for HP Debug Commands
bootup—Display messages when the switch is booting up.
cli—Display messages when the command-line interface (CLI) is in
config-vlan mode.
debug sw-vlan ifs
command.
debug sw-vlan notification
debug sw-vlan vtp
command.
command.
OL-8916-01