Appendix C
Cisco Catalyst Blade Switch 3020 for HP Show Platform Commands
show platform mac-address-table
Use the show platform mac-address-table privileged EXEC command to display platform-dependent
MAC address table information.
Syntax Description
aging-array
hash-table
mac-address mac-address
vlan vlan-id
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History
Release
12.2(25)SEF
Usage Guidelines
You should use this command only when you are working directly with a technical support representative
while troubleshooting a problem. Do not use this command unless a technical support representative asks
you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
OL-8916-01
show platform mac-address-table [aging-array | hash-table | mac-address mac-address] [vlan
vlan-id]] [ | {begin | exclude | include} expression]
Modification
This command was introduced.
(Optional) Display the MAC address table aging array.
(Optional) Display the MAC address table hash table.
(Optional) Display the MAC address table MAC address information,
where mac-address is the 48-bit hardware address.
(Optional) Display information for the specified VLAN. The range is 1
to 4094.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Cisco Catalyst Blade Switch 3020 for HP Command Reference
show platform mac-address-table
C-11