Ip Igmp Snooping Vlan Static - Cisco 3020 - Catalyst Blade Switch Command Reference Manual
Cisco catalyst blade switch 3020 for hp command reference, rel. 12.2(25)sef1
Hide thumbs
Also See for 3020 - Cisco Catalyst Blade Switch:
- Configuration manual (712 pages) ,
- Release note (54 pages) ,
- Getting started manual (37 pages)
Table of Contents
Advertisement
Chapter 2
Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands
ip igmp snooping vlan static
Use the ip igmp snooping static global configuration command to enable Internet Group Management
Protocol (IGMP) snooping and to statically add a Layer 2 port as a member of a multicast group. Use
the no form of this command to remove ports specified as members of a static multicast group.
Syntax Description
vlan-id
ip-address
interface interface-id
Defaults
By default, there are no ports statically configured as members of a multicast group.
Command Modes
Global configuration
Command History
Release
12.2(25)SEF
Usage Guidelines
VLAN IDs 1002 to 1005 are reserved for Token Ring and FDDI VLANs and cannot be used in IGMP
snooping.
The configuration is saved in NVRAM.
Examples
This example shows how to statically configure a host on an interface:
Switch(config)# ip igmp snooping vlan 1 static 0100.5e02.0203 interface gigabitethernet0/1
Configuring port gigabitethernet0/1 on group 0100.5e02.0203
You can verify your settings by entering the show ip igmp snooping privileged EXEC command.
OL-8916-01
ip igmp snooping vlan vlan-id static ip-address interface interface-id
no ip igmp snooping vlan vlan-id static ip-address interface interface-id
Enable IGMP snooping on the specified VLAN. The range is 1 to 1001
and 1006 to 4094.
Add a Layer 2 port as a member of a multicast group with the specified group
IP address.
Specify the interface of the member port. The keywords have these
meanings:
•
•
Modification
This command was introduced.
gigabitethernet interface number—a Gigabit Ethernet IEEE 802.3z
interface.
port-channel interface number—a channel interface. The range is 0
to 48.
Cisco Catalyst Blade Switch 3020 for HP Command Reference
ip igmp snooping vlan static
2-135
Advertisement
Table of Contents
