Ip Dhcp Snooping Trust - Cisco 3020 - Catalyst Blade Switch Command Reference Manual
Cisco catalyst blade switch 3020 for hp command reference, rel. 12.2(25)sef1
Hide thumbs
Also See for 3020 - Cisco Catalyst Blade Switch:
- Configuration manual (712 pages) ,
- Release note (54 pages) ,
- Getting started manual (37 pages)
Table of Contents
Advertisement
ip dhcp snooping trust
ip dhcp snooping trust
Use the ip dhcp snooping trust interface configuration command to configure a port as trusted for
DHCP snooping purposes. Use the no form of this command to return to the default setting.
Syntax Description
This command has no arguments or keywords.
Defaults
DHCP snooping trust is disabled.
Command Modes
Interface configuration
Command History
Release
12.2(25)SEF
Usage Guidelines
Configure as trusted ports those that are connected to a DHCP server or to other switches or routers.
Configure as untrusted ports those that are connected to DHCP clients.
Examples
This example shows how to enable DHCP snooping trust on a port:
Switch(config-if)# ip dhcp snooping trust
You can verify your settings by entering the show ip dhcp snooping user EXEC command.
Related Commands
Command
show ip dhcp snooping
show ip dhcp snooping binding
Cisco Catalyst Blade Switch 3020 for HP Command Reference
2-110
ip dhcp snooping trust
no ip dhcp snooping trust
Modification
This command was introduced.
Chapter 2
Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands
Description
Displays the DHCP snooping configuration.
Displays the DHCP snooping binding information.
OL-8916-01
Advertisement
Table of Contents
