Ip Dhcp Snooping Trust - Cisco Catalyst 2960 Command Reference Manual
Hide thumbs
Also See for Catalyst 2960:
- Configuration manual (2288 pages) ,
- Software configuration manual (980 pages) ,
- Command reference manual (800 pages)
Table of Contents
Advertisement
Chapter 2
Catalyst 2960 Switch Cisco IOS Commands
ip dhcp snooping trust
To use this command, the switch must be running the LAN Base image.
Note
Use the ip dhcp snooping trust interface configuration command to configure a port as trusted for
DHCP snooping purposes. Use the no form of this command to return to the default setting.
Syntax Description
This command has no arguments or keywords.
Defaults
DHCP snooping trust is disabled.
Command Modes
Interface configuration
Command History
Release
12.2(25)FX
Usage Guidelines
Configure as trusted ports those that are connected to a DHCP server or to other switches or routers.
Configure as untrusted ports those that are connected to DHCP clients.
Examples
This example shows how to enable DHCP snooping trust on a port:
Switch(config-if)# ip dhcp snooping trust
You can verify your settings by entering the show ip dhcp snooping user EXEC command.
Related Commands
Command
show ip dhcp snooping
show ip dhcp snooping binding
OL-8604-04
ip dhcp snooping trust
no ip dhcp snooping trust
Modification
This command was introduced.
Description
Displays the DHCP snooping configuration.
Displays the DHCP snooping binding information.
Catalyst 2960 Switch Command Reference
ip dhcp snooping trust
2-137
Advertisement
Table of Contents
