Debug Dot1X - Cisco Catalyst 2960 Command Reference Manual
Hide thumbs
Also See for Catalyst 2960:
- Configuration manual (2288 pages) ,
- Software configuration manual (980 pages) ,
- Command reference manual (800 pages)
Table of Contents
Advertisement
Appendix B
Catalyst 2960 Switch Debug Commands
debug dot1x
Use the debug dot1x privileged EXEC command to enable debugging of the IEEE 802.1x authentication
feature. Use the no form of this command to disable debugging.
Syntax Description
all
errors
events
feature
packets
registry
state-machine
Note
Though visible in the command-line help strings, the redundancy keyword is not supported.
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
Release
12.2(25)FX
12.2(25)SEE
Usage Guidelines
The undebug dot1x command is the same as the no debug dot1x command.
Related Commands
Command
show debugging
show dot1x
OL-8604-04
debug dot1x {all | errors | events | feature | packets | registry | state-machine}
no debug dot1x {all | errors | events | feature | packets | registry | state-machine}
Display all IEEE 802.1x authentication debug messages.
Display IEEE 802.1x error debug messages.
Display IEEE 802.1x event debug messages.
Display IEEE 802.1x feature debug messages.
Display IEEE 802.1x packet debug messages.
Display IEEE 802.1x registry invocation debug messages.
Display state-machine related-events debug messages.
Modification
This command was introduced.
The feature keyword was added.
Description
Displays information about the types of debugging that are enabled.
Displays IEEE 802.1xstatistics, administrative status, and operational status
for the switch or for the specified port.
Catalyst 2960 Switch Command Reference
debug dot1x
B-7
Advertisement
Table of Contents
