Queue-Set - Cisco Catalyst 2960 Command Reference Manual

Hide thumbs Also See for Catalyst 2960:

Table of Contents

queue-set

To use this command, the switch must be running the LAN Base image.

Use the queue-set interface configuration command to map a port to a queue-set. Use the no form of this

command to return to the default setting.

Syntax Description

The queue-set ID is 1.

Command Modes

Interface configuration

Command History

This example shows how to map a port to queue-set 2:

Switch(config)# interface gigabitethernet0/1

Switch(config-if)# queue-set 2

You can verify your settings by entering the show mls qos interface [interface-id] buffers privileged

EXEC command.

Related Commands

mls qos queue-set output buffers

mls qos queue-set output threshold

show mls qos interface

Catalyst 2960 Switch Command Reference

queue-set qset-id

no queue-set qset-id

ID of the queue-set. Each port belongs to a queue-set, which defines all the

characteristics of the four egress queues per port. The range is 1 to 2.

Modification

This command was introduced.

Allocates buffers to a queue-set.

Configures the weighted tail-drop (WTD) thresholds,

guarantees the availability of buffers, and configures the

maximum memory allocation to a queue-set.

Displays quality of service (QoS) information.

Catalyst 2960 Switch Cisco IOS Commands