Clear Spanning-Tree Counters - Cisco Catalyst 2960 Command Reference Manual
Hide thumbs
Also See for Catalyst 2960:
- Configuration manual (2288 pages) ,
- Software configuration manual (980 pages) ,
- Command reference manual (800 pages)
Table of Contents
Advertisement
clear spanning-tree counters
clear spanning-tree counters
Use the clear spanning-tree counters privileged EXEC command to clear the spanning-tree counters.
Syntax Description
interface interface-id
Defaults
No default is defined.
Command Modes
Privileged EXEC
Command History
Release
12.2(25)FX
Usage Guidelines
If the interface-id is not specified, spanning-tree counters are cleared for all interfaces.
Examples
This example shows how to clear spanning-tree counters for all interfaces:
Switch# clear spanning-tree counters
Related Commands
Command
show spanning-tree
Catalyst 2960 Switch Command Reference
2-46
clear spanning-tree counters [interface interface-id]
(Optional) Clear all spanning-tree counters on the specified interface. Valid
interfaces include physical ports, VLANs, and port channels. The VLAN
range is 1 to 4094. The port-channel range is 1 to 6.
Modification
This command was introduced.
Description
Displays spanning-tree state information.
Chapter 2
Catalyst 2960 Switch Cisco IOS Commands
OL-8604-04
Advertisement
Table of Contents
