Cisco Catalyst 2960 Command Reference Manual page 169

Hide thumbs Also See for Catalyst 2960:

Table of Contents

Catalyst 2960 Switch Cisco IOS Commands

This example shows how to limit to 25 the number of IGMP groups that a port can join:

Switch(config)# interface gigabitethernet0/2

Switch(config-if)# ip igmp max-groups 25

This example shows how to configure the switch to replace the existing group with the new group for

which the IGMP report was received when the maximum number of entries is in the forwarding table:

Switch(config)# interface gigabitethernet0/1

Switch(config-if)# ip igmp max-groups action replace

You can verify your setting by using the show running-config privileged EXEC command and by

specifying an interface.

Related Commands

show running-config interface

interface-id

Displays the running configuration on the switch interface, including

the maximum number of IGMP groups that an interface can join and

the throttling action. For syntax information, select Cisco IOS

Configuration Fundamentals Command Reference, Release 12.2 >

File Management Commands > Configuration File Management

Catalyst 2960 Switch Command Reference

ip igmp max-groups